• Journal of Ocean Engineering and Technology
• /
• v.31 no.5
• /
• pp.340-345
• /
• 2017

It is important to predict the hydrodynamic maneuvering derivatives, which consist of the forces and moment acting on a hull during a maneuvering motion, when estimating the maneuverability of a ship. The estimation of the maneuverability of a ship with a change in the stern hull form is often performed at the initial design stage. In this situation, a method that can reflect the change in the hull form is necessary in the prediction of the maneuverability of the ship. In particular, the linear hydrodynamics maneuvering derivatives affect the yaw checking motion as the key factors. In the present study, static drift calculations were performed using Computational Fluid Dynamics (CFD) based on Reynolds Average Navier-Stokes (RANS) for a 40-segment hull. A prediction method for the linear hydrodynamic maneuvering derivatives was proposed using the slender body theory from the distribution of the lateral force acting on each segment of the hull. Moreover, the results of a comparison study to the model experiment for KVLCC1 performed by KRISO are presented in order to verify the accuracy of the static drift calculation. Finally, the linear hydrodynamic maneuvering derivatives obtained from both the model test and calculation are compared and presented to verity the usefulness of the method proposed in this study.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.4
• /
• pp.289-295
• /
• 2005

This study is intended to provide navigator with specific information necessary to assist in the avoidance of collision and in operation of ships to evaluate the manoeuvrability of own ship. The actual manoeuvering characteristics of ship can be adequately judged from the results of typical ship trials manoeuvres. Author carried out sea trials based full scale for turning test, zig-zag test, spiral tests and crash-stop test at actual sea going condition. The turning circle manoeuvres were performed on starboard and port sides with $35^{\circ}$ rudder angle at the service speed, and Zig-zag procedures were performed on both sides with $10^{\circ}$ and $20^{\circ}$ rudder angle respectively. Spiral tests were carried out on the both sides and crash stop test was also carried out. The results from tests could be compared directly with the standards of manoeuverability of IMO and consequently the manoeuvring qualities of the ship is fully satisfied with its.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.1 s.151
• /
• pp.1-7
• /
• 2007

Recently, researches to find rational mathematical model for prediction of capsizing have been progressed by ITTC. Lee(1997) developed a mathematical model which describes 6 DOF transient motions, such as capsizing, of a ship in regular waves. In this study a mathematical model for prediction of capsizing in following and quartering seas is developed based on Lee's model. And factors affecting prediction of capsizing are analyzed through comparing simulation results with experimental results. Present simulation results are compared with ITTC bench mark test results. In rolling tests with beam seas and tree runs with stern quartering seas, capsizing events are predicted well. But calculated roll angle is larger than experimental one. It is found that nonlinear manoeuvring coefficients don't affect the prediction of capsizing events.

• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.735-740
• /
• 2010

This paper focuses on the effects of hydrodynamic forces between overtaking and overtaken vessels moving under the influences of external forces, such as strong wind and current in shallow water, in which condition the ship handling may become very complex. The purpose of this paper is to develop a guideline for safe conducting distance between two ships according to the velocity and the significance of external disturbances.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.1
• /
• pp.52-59
• /
• 2020

This study aims to investigate the bow thruster performance of the research vessel "NARA" by full-scale maneuvering trials. The thruster test method refers to ITTC's recommended procedures and guidelines. Turning tests with the bow thruster are performed at speed conditions of 0, 2, and 4 knots. The test results indicate that the Rate of Turn (ROT) increased when the ship is in a higher speed condition. Due to the position of the propeller and the housing of the bow thruster, there is difference in the efficiency of the bow thruster according to the turning direction. Zigzag tests with the bow thruster were conducted at speed conditions of 2 and 4 knots. At speeds above 4 knots, it seems difficult to change the course only with the bow thruster.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.4
• /
• pp.350-360
• /
• 2018

Analysis of ship's manoeuverability in shallow water is an important task from the perspective of the vessels' navigational safety. Since the number of ships operated in restricted water has increased due to the enlargement of vessels and ships represent different characteristics of the manoeuverability when operated in shallow and deep water, it is significant to evaluate ship manoeuverability at initial design stage. At the initial stage of design, the estimation of manoeuverability is generally performed with hydrodynamic coefficients estimated based on empirical formula. However, the accuracy of estimating hydrodynamic coefficients by the empirical formula in shallow water is poor compared to that in deep water. Therefore, the error in the estimation of manoeuverability increases in shallow water. In this study, CFD is proposed to improve the accuracy of manoeuverability in shallow water at the initial design stage and hydrodynamic coefficients were obtained based on PMM test in shallow water. Furthermore, the ship manoeuverability was estimated both the proposed strategy and the empirical formula. At last, validity of the proposed strategy using CFD for the estimation of manoeuverability was confirmed by comparison with the manoeuverability estimation results from model test.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.45-50
• /
• 2006

본 연구는 Manta형 무인잠수정(Manta-type Unmanned Undersea Vehicle)의 동안정성을 검토한 후에 이 데이터를 기초로 하여 6자유도 수치 시뮬레이션을 실시하였다. 또한, 수치 시뮬레이션을 통하여 각각의 유체력미계수가 UUV의 6자유도 운동에서 미치는 영향에 대하여 검토하였다. 민감도 해석(Sensitivity Analysis)을 위한 방법은 간접법(Indirect Method)을 사용하였다. 수학모델 및 유체력미계수의 추정은 손경호 등(2006)의 결과를 이용하여 수행하였다. 연구를 통하여 UUV의 조종운동 모델에서 각각의 유체력미계수가 가지는 상대적 중요도를 알 수 있었다.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.141-148
• /
• 2003

Yaw-checking and course-keeping ability in IMO's ship manoeuvrability standards is reviewed from the viewpoint cf sole navigation Three kinds of virtual series-ships, which have different course instability, are taken as test models. The numerical simulation on Z-test is carried out in order to examine the correlation between known manoeuvrability in spiral characteristics and various kinds of overshoot angle. Then simulator experiments are executed with series-ships in a curoed, narrow waterway by six operators(five active pilots and one ex-captain) in order to examine the correlation between known manoeuvrability and degree of manoeuvring difficulty. IMO criteria for yaw-checking and course-keeping ability are discussed and revised criteria are proposed.

• Journal of Power System Engineering
• /
• v.13 no.5
• /
• pp.18-24
• /
• 2009

This paper shows the result of development about the revolution system of azimuth thruster which of power is less than 250kW for small ship. Advanced Azimuth revolution system can revolve propeller and rudder from 360 degree so that this system for vessel maneuvering can be excellent of propulsion effectively. Fluid power control system for azimuth thruster is designed with PID control system by using CEMTool/SIMTool program. And the actuator used for servo valve can control rudder angle, pressure and direction. The first, We had a test for the angle control of revolution system. The result of angle control confirmed that it has the good efficiency from experiment result of time input degree $30^{\circ}$, $90^{\circ}$ and $180^{\circ}$. The second, We had to a test for the pressure characteristic of hydraulic motor. As a result, We confirmed the maximum pressure 3.5MPa and steady state 0.7MPa nom experiment result of time input degree $30^{\circ}$. In this paper, it is identified the pressure characteristic of hydraulic motor and angle control for azimuth thruster by AMESim, and it has been confirmed the usefulness of AMEsim modeling was verified by comparison between AMESim simulation results and experiments results.

• Journal of the Korean Institute of Navigation
• /
• v.18 no.4
• /
• pp.33-47
• /
• 1994

On developing port system, the performance tests of system in relation to ship maneuver generally consists of the three parts: the channel transit, the manoeuvring in a turning basin and the docking/undocking. The quantifications of risk of an accident has priviously been difficult due to the low occurrence of accidents relative to the number of transits. Additionally, accident statistics could not be related port system because of the large number of factors contributing to the accident. such as human error, equipment failure, visibility, light, traffic. etc. In case of the channel transit, "Relative Risk Factor(RRF)" or "Relative Risk Factor for Meeting Traffic" was proposed as the as the measures derived to quantify the relative risk of accident by M.W.Smith. This factor measure the tracking performance, the turning performance and the passing performance at meeting traffic. On the other hand, the safety of berthing maneuver is not measured with a few evaluating factors as controlled due to complex controllabilites such as steering, engine, side thrusters or tugs. This work, therefore, aims to propose the evaluating measure by the Analytic Hierarchy Process(AHP). Six experimental scenarios were establised under the various environmental conditions as independent variables. In every simulation, the difficulty of maneuver was scored by captain and compared with AHP scores. The results show almost same and from which the weights of eight evaluating factors could be fixed. Additionally, the limit value of relative factor in berthing safety to six scenarios could be estimated to 0.11.e estimated to 0.11.