• 동력기계공학회지
• /
• 제18권6호
• /
• pp.180-185
• /
• 2014

Due to the larger and high-speed vessels recently constructed, output and speed of the engines for propulsion or power generation is increasing. These high-power and high-speed engine of the ship is becoming as a major contributor causing excessive noise and vibration. Other fittings as well as equipment installed on board, it makes equipment failure or other defect by resonance. This causes a lot of M/H(Man Hour) for repairs and the reliability of the company is invading even be negative because the clients give much comment. Thus, it's being studied for any fittings installed on board to maintain the safe operation and to prevent any problem during the performance in any operating conditions. In this study, it was investigated to solve these problems for the supports of the various fittings for easy installation-related support that each type of intensity and shape and manufacturing method using structural analysis program(DNV Nauticus Hull 3D Beam). Namely, it would be applied to the very large crude carriers in consideration of mechanics of materials of the support equipment by providing the fact that dynamics analysis of the structural characteristics of the equipment and the support of the production installation is easy and productivity can be high standards for geometry and thereby to simplify the analysis task to design changes at the same time and to minimize the reinforcement for the supports.

• 대한조선학회논문집
• /
• 제28권2호
• /
• pp.293-306
• /
• 1991

선박은 내부에 소음원을 가지고 있을 뿐 아니라 진동의 전달 특성이 좋은 강판 구조물이기 때문에 기진원과 소음원을 포함한 구조계및 주변 음장계까지 포함한 전체계에 대한 소음 예측을 수행하여야 한다. 이러한 선내 소음 환경을 예측하기 위하여 본 연구에서는 통계적 에너지 해석법을 이용하여 고차 진동의 전달 특성, 음장과 구조물과의 상호 작용 및 음장의 투과 손실등에 대한 해석 이론을 정식화하고 이를 바탕으로 선내 소음 예측을 위한 전산 프로그램을 개발하였다. 또, 소형 연안 여객선을 대상으로 하여 이론적 소음 예측 계산을 수행하고 실선 계측 결과와 비교하여 그 타당성을 확인하였으며, 공기음과 고체음에 대한 전달 특성을 분석하여 보았다.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.11-18
• /
• 1991

본 연구에서는 각이 지게 주름잡힌 주름판 구조물(산형, 사다리꼴형, 장방형 주름판)의 강성을 해석 하고, 이 강성식들을 일원화하여 한개의 식으로 표현하여 주고 자 한다. 이론 해석은, 연결부에서의 각도가 변형중에 변하지 않는다는 가정하에, 등가의 직교이방성판의 강성식을 유도하였다. 또한, 이론적으로 얻어진 강성치를 진 동해석에 적용시킴으로서, 직교이방성판으로서의 주름판의 고유진동수를 구하였다. 그리고 이를 진동실험에서 얻은 결과 및 PC용 슈퍼 SAP에서 얻은 수치결과와 비교함으로 서 이론의 신뢰성을 입증하였다.

• 한국해양공학회지
• /
• 제21권5호
• /
• pp.55-60
• /
• 2007

Bellows are mechanical components which prevent the damage of system by absorption of the vibration and the displacement of axle and radial direction. Thermal piping system is expanded by the fluid of the high temperature from the heat engine inside. At this time, bellows prevent the damage of the piping due to the thermal expansion. Recently, design of bellows is required to fit some other operational environments which are not suggested in the E.J.M.A code book. And it is difficult to produce and to maintain bellows of high temperature and high pressure bemuse of its complicated shape and this causes the manufacturing cost to rise. The objective of this study is to determine optimum shape of bellows which can endure in the high temperature and high pressure. The maximum stress has an effect on the fatigue life of bellows, therefore it needs to be minimized. This study attempts to find a shape which minimizes the stress occurring in the bellows by the design of experiment. The model used in this study is not presented in the E.J.M.A code book, therefore, from the result of design of experiment we find the factors which give effects on the characteristic value and we presents the recession model using the RSM, which can predict the characteristic values depending on the change of factor values.

• 대한조선학회논문집
• /
• 제50권1호
• /
• pp.1-7
• /
• 2013

The high-skewed and/or composite propellers of current interests to reduce the ship vibration and to increase the acoustic performance are likely to be exposed to the unexpected structural problems. One typical example is that the added mass effect on the propellers working in the non-uniform wake field reduces the natural frequency of the propeller leading to the resonance with the low-frequency excitation of the external forces. To avoid this resonance problem during the design stage, the technique of fluid-structure interaction has been developed, but the higher-order effect of the blade geometry deformation is not yet considered in evaluating the added mass effects. In this paper the fluid boundary-value problem is formulated by the potential-based panel method in the inviscid fluid region with the velocity inflow due to the body deformation, and the structural response of the solid body under the hydrodynamic loading is solved by applying the finite element method which implements the 20-node iso-parametric element model. The fluid-structure problem is solved iteratively. A basic fluid-sturcture interaction study is performed with the simple rectangular plates of thin thickness with various planform submerged in the water of infinite extent. The computations show good correlation with the experimental results of Linholm, et al. (1965).

• 대한조선학회논문집
• /
• 제48권6호
• /
• pp.569-574
• /
• 2011

In research vessels or naval ships, airborne noise from machineries such as diesel engine is the major source of underwater noise at low speed. In this paper, effect of engine noise on underwater noise is studied by considering two paths; sound radiation from hull plate and direct airborne noise transmission through hull plate. SEA (Statistical energy analysis) is used to predict hull plate vibration induced by engine noise, where SEA model consists of only two subsystems; engine room air space and hull plate. The pressure level in water is calculated from sound radiation by plate. Engine noise transmission through hull plate is obtained by assuming plane wave propagation in air-limp plate-water system. Two effects are combined and compared to the measurement, where speaker is used as a source in engine room and sound pressure levels in engine room and water are measured. The hydrophone is located 1 m away from the hull plate. It is found below 1000 Hz, prediction overestimates underwater sound pressure level by 5 to 12 dB.

• 대한조선학회논문집
• /
• 제59권1호
• /
• pp.39-45
• /
• 2022

Normal strategy of structure optimization procedure has been minimum cost or weight design. Minimum weight design satisfying an allowable stress has been used for the ship and offshore structure, but minimum cost design could be used for the case of high human cost. Natural frequency analysis and forced vibration one have been used for the strength estimation of marine structures. For the case of high precision experiment facilities in marine field, the structure has normally enough margin in allowable stress aspect and sometimes needs high natural frequency of structure to obtain very high precise experiment results. It is not easy to obtain a structure design with high natural frequency, since the natural frequency depend on the stiffness to mass ratio of the structure and increase of structural stiffness ordinary accompanies the increase of mass. It is further difficult at the grillage structure design using the profiles, because the properties of profiles are not continuous but discrete, and resource of profiles are limited at the design of grillage structure. In this paper, the grillage structure design system under the constraint of high natural frequency is introduced. The design system adopted genetic algorithm to realize optimization procedure and can be used at the design of the experimental facilities of marine field such as a towing carriage, PMM, test frame, measuring frame and rotating arm.

• 한국전산구조공학회논문집
• /
• 제35권2호
• /
• pp.93-100
• /
• 2022

본 논문에서는 한국의 서남해상에 건설예정인 해상풍력발전타워의 지지구조물로 고려되고 있는 세발구조와 자켓구조의 선박충돌 거동을 비선형동적해석을 통하여 비교·분석하였다. 이 구조물은 3MW용량의 풍력타워를 지지하기 위하여 설계되었다. 두 지지구조는 쉘요소를 이용하여 비선형 거동을 고려할 수 있도록 모델링하였고, 발전기를 포함하는 상부의 타워구조물은 탄성재료를 이용하여 보요소와 집중질량으로 모델링하였다. 전체 질량은 세발구조가 자켓구조에 비하여 약 1.66배 정도였다. 바지선과 상선을 충돌선박으로 선정하여 모델링하였다. 조수차의 조건을 고려하여 충돌선박의 충돌위치를 평균해수면의 상하로 3.5m변동하는 것으로 고려하였다. 또한 각 선박의 최소충돌속도(=2.6m/s)에서의 충돌에너지를 각각 4배까지 증가시키면서 충돌거동을 산정하였다. 해석결과 지지구조 충돌부위의 강성이 클수록 선박의 소성에너지 소산량이 상대적으로 증가하였다. 충돌조건에 따라 풍력타워의 변형은 진동에서 붕괴까지 발생하였다. 세발구조가 자켓구조에 비하여 큰 충돌저항력을 보였다. 이는 중앙부에 강성이 집중된 구조적 특성과 상대적으로 많은 강재의 사용량에 기인한 것으로 판단된다.