• Journal of Navigation and Port Research
• /
• v.38 no.3
• /
• pp.193-202
• /
• 2014

The comprehensive review of the STCW 1978, as amended in 1995 and associated Code was carried out from 2006 to 2010. These amendments will have a certain degree of impact on Maritime Education and Training(MET) institutes in terms of education and training of seafarer worldwide. Particularly, the Far East region countries are effected more than other regions since they covered about 30% of officers and 37% ratings in the world. In view of these facts this dissertation conceived to analyze the problems in the Far East main seafarer supply countries faced the implementation of "STCW Manila Amendments" To analyze these problems, this dissertation carried out questionnaire research to 7 targeted main MET of major Far East seafarer supply countries. After research this dissertation suggests the possible solutions such as, Joint On-Board Training Center; Joint Asia Maritime E-learning Systems; methods to reducing work-load, ship inspection burden and determine mandatory minimum safety manning standards in a safe way; technical cooperation fund to installation of training equipment; and clarify vague terminology of STCW Manila Amendments, to solve problems identified through the questionnaires.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.6
• /
• pp.579-589
• /
• 2008

In the past few years, there are many studies and researches of the underwater vehicles which are carried out its mission using sonar sensors. MSCL(Marine System Control Lab.) at Inha University developed test-bed small ROV, ISRO. ISRO is an open-frame type and has 4 thrusters. ISRO can control 4 motions i.e surge, sway, yaw and heave with sonar sensors. ISRO is developed for inspection of ship hull, marine structure, plant of lake or river and so on. When ROV ISRO inspects something, it is necessary to control the position of ROV ISRO's for the movement and anti-collision with structures in the underwater. In this paper, we deal with the development of a small ROV and verification of the position control system via simulation and experiment using sonar sensors.

• Journal of the Society of Disaster Information
• /
• v.8 no.2
• /
• pp.138-147
• /
• 2012

In this paper, the various parametric study of collisions between a offshore wind tower and vessels were performed to estimate the ultimate behaviors of the bucket foundation and the tower. Additionally, the stability of the foundation and the energy dissipation capacities of the tower were analyzed. The results shows that the collision energy of the vessel was mainly dissipated by the plastic deformation energy of the tower and the foundation system shown enough bearing capacity against to this severe loading condition.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.6
• /
• pp.954-959
• /
• 2020

This study aimed to verify the effectiveness of rescue apparatus, that can capture crabs using external stimuli such as food and electricity, without relying on divers. In this study, a microcomputer-based controller and an IC-device-based controller were developed, and spot inspection was conducted using 20 modules and 30 sea urchin removal modules. Accordingly, 58, 18, 17, and 74 sea urchins were introduced in the first, second, third and fourth experiments, respectively. The result of evaluating the lure of each removal mechanism, based on the catch per unit effort, with an electrical stimulus was 1.1 (32/10), with a feeding stimulus was 3.4 (100/29), and with electrical and feeding stimuli was 3.5 (35/10).

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.4
• /
• pp.235-242
• /
• 2022

As ship condition inspection technology has been developed, research on collecting, analyzing, and diagnosing condition information has become active. In ships, related research has been conducted, such as analyzing, detecting, and classifying major hull failures such as cracks and corrosion using 2D and 3D data information. However, for geometric deformation such as indents and bulges, 2D data has limitations in detection, so 3D data is needed to utilize spatial feature information. In this study, we aim to detect hull structural deformation positions. It builds a specimen based on actual hull structure deformation and acquires a point cloud from a model scanned with a 3D scanner. In the obtained point cloud, deformation(outliers) is found with a combination of RANSAC algorithms that find the best matching model in the Octree data structure and dataset.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.1
• /
• pp.83-90
• /
• 2022

This study deals with replacement analysis of deteriorated equipment for improving productivity of production system. Frequent breakdown of the deteriorated equipment causes a situation that reduces productivity such as low product quality, process delay, and repair cost. However, the replacement of new equipment will be required a high initial investment cost, so it is important to analysis the economic feasibility. Therefore, we analyze the effect of the production system due to the aging effect of the equipment and the feasibility of equipment replacement based on the economic analysis. The process flow, working time, logistics movement, etc. are analyzed in order to build the simulation modeling for a ship and land switchboard production system. Using numerical examples, the economic feasibility analysis of equipment replacement through replacement of existing deteriorated equipment and additional arrangement of new facilities is performed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.2
• /
• pp.173-180
• /
• 2018

Marine casualties of small fishing vessels (SFV) of less than 20 tons are frequent in Korea. The analysis was conducted to identify the cause and then prepared reduction plan using the marine casualty statistics of fishing vessels for the last five years from 2012 to 2016 by the Korean Maritime Safety Tribunal to reduce the marine casualties of SFV. According to the analysis of the type of whole vessels occurring marine casualty, fishing vessels accounted for an average 68.0 %; moreover, except for 2014 when M/V SEWOL ferry capsizing occurred, the rate of death and missing due to marine casualties occurred from 68.3 % to 91.2 % in fishing vessels, and an average 79.5 % was found to be urgent need of a measure. Marine casualties occurrence depending on the gross tonnage of fishing vessel was found that the most occurred at less than 5 tons, followed by the order of 5 to 10 tons or less. However, crews who boarded on SFV do not have any training program for them, except for the fishing safety training of fisher who carry out fishing for shipowners and crew of the coastal and offshore fishing vessel in accordance with the safety regulations for fishing vessels in the Fisheries Cooperative Association. Therefore, it is necessary to revise the training program so as to improve the preventive action and then emergency response including the fishing safety compliance with each fishery, safe navigation, machinery inspection and emergency response. Also, an SFV of less than 5 tons of 56,000 vessels is boarded by unqualified fishers. It would also be possible to consider subdividing small boat operator's certificate to enhance their qualifications. It is expected that marine casualties of SFV will be reduced if active efforts are made to improve the safety consciousness of fisher and shipowners as well as the reorganization of fishing safety training and the small boat operator's certificate system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.389-397
• /
• 2014

The purpose of this thesis is studying for a legal basis and definition of Oil Record Book. In the thesis, comparing with the laws related to punishment for false entry of Oil Record Book of the maritime countries and korea Act. Studying the improvement marine pollutants from ships by suggesting legal and institutional proposal which are able to make themselves increase effectiveness for recording and inspection of Oil Record Book. Suggest the solution of the problems raised in this thesis, First, The Oil Record Book should not be the evidence which is having the effectiveness simply after the accident of marine pollution, but take sanction on pre-inspection of Oil Record Book as establish the concrete administrative punishment for each contents-based record of Oil Record Book. Second, It should set up of judgement criteria of false entry of Oil Record Book by port state control officer. Third, It should strengthen the legal effectiveness of Oil Record Book contents such as Code(c) ; oil residue, Code(d); relating to bilge discharge by including premeditation for false entry of Oil Record Book. Also, The enhancement of role for marine pollution prevention manager raise the effectiveness of Oil Record Book as recognizing the importance of Oil Record Book.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.1
• /
• pp.18-26
• /
• 2019

The Maritime Labour Convention, 2006, (MLC) aimed to ensure decent working conditions for seafarers and entered into force on August 20, 2013. It was considered as the fourth pillar in the maritime sector. This paper evaluates how the MLC has been implemented in the field and what issues were addressed in the shipping industry. To achieve this, statistical analysis was conducted using inspection data of Port State Control (PSC) carried out by the Paris MOU and the Tokyo MOU during 2010-2012 and 2014-2016 for deficiencies under the MLC and International Labour Organization (ILO) No. 147 Convention. This study compared pre-2013 and post-2013 deficiency data according to ship's age, size (gross tonnage) and type. The results showed that, although the deficiencies reported by the Tokyo MOU during 2014-2016 were nearly double those from 2010-2012, the deficiency share against total deficiencies for the Tokyo MOU remained two thirds of those for the Paris MOU. This study suggests that the Tokyo MOU should strengthen its inspection efforts on MLC and ILO should provide clear references, such as guidelines and a unified interpretation for national discretions under the MLC for the purpose of harmonized PSC inspections. Additionally, it would be desirable to consolidate the deficiency coding system for the MLC by deleting the codes for the ILO No. 147 Convention, which was incorporated into the MLC. It would also be beneficial to add new deficiency codes for social security, including seafarers' leave and repatriation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.4
• /
• pp.366-374
• /
• 2013

Maritime transportation circumstance is changing rapidly in accordance with the increase of cargo volume between countries and increase of marine leisure activities by improvement of quality of life. And the circumstance for ship operation is also changing due to aging of seafarers and increasing of foreign seafarers. To cope with such changes in maritime environment well, it requires higher safety management skills from shipping companies, the main subject in charge of the safety matter. In this paper, we analyzed domestic and foreign similar system, and then applied imitation strategies for introduction of an unific evaluation and management system that was consist of marine accidents, port state control, ISM Code and so on from shipping companies. We defined that the imitation industry and system are converted accident ration of construction industry and traffic safety excellence company of road transportation, and then extracted relevant law, evaluation index, incentive system as a imitation subject. We also proposed scheme that introduction of basis law, and evaluation tool with marine accidents ratio, port state control & ism code result, and incentives such as immunity of safety inspection or reduction of commission for introduction of company's safety management level evaluation system. Finally, we proposed the imitation timing and plan in stages for system's sustainable development through the prompt introduction and continuous enforcement.