• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.10-18
• /
• 2022

With the increase in world trade through ships, the destruction of the marine ecosystem and socioeconomic damage due to invasive alien species (IAS) are continuously increasing. In particular, marine organisms attached on the hull surface and niche area increase the friction resistance of ships as well as the invasion of non-indigenous species, and causes a decrease in operational efficiency and an increase in GHG (Green House Gas) emissions. The International Maritime Organization (IMO) has recently begun revising guidelines for the control and management of ship's biofouling, and New Zealand and California in the United States are already regulating biofouling management under their own laws. This study investigated the management status of the submerged surface of ships and marine organisms attachments on five international ships entering South Korea, and analyzed species group and coverage (%) of biofouling communities to evaluate the LoF (Level of Fouling) rank. Macroflouling was observed on all ships surveyed, and specially, the adhesion of macro organisms in niche areas such as bow thruster, bilge keels and sea-chest gratings appeared to be at a serious level. This study proposed the management direction our country should take with regard to ship's biofouling and the improvement measures for evaluation of LoF rank and inspection methods of hull and niche ares.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.291-297
• /
• 2006

Recently it is a tendency that the use of the heavy fuel oil is investigated even from the middle&small class vessel in order to reduce the operating cost of vessel caused by with rise of international gas price. In this study, analyzed the physical & chemical properties and examined the effect of refining treatment and a fuel oil additive for MF30 fuel oil which is a mixture fuel oil mixed M.G.O and the heavy oil MF380 use to be possible in the middle&small class vessel. As a results, the effects of two of pre-refinery treatment methods as centrifugal purifier and heating & homogenizing system(M.C.H) are some feeble, but the pour point and the flash point came to be low more or less. The effect of property improvement which is caused by with the fuel oil additive did not appear positively.

• Journal of Navigation and Port Research
• /
• v.28 no.1
• /
• pp.43-49
• /
• 2004

Defects inspection of commodities are very important with those design and manufacturing process and essential to strengthen the competitiveness of those. If on-line automatic defects detection is performed without damaging to products, the production cost shall be curtailed through the reducing man-power, economical management of Q.C(Quality Control). In this paper, it is suggested three spatial filtering methods which can extract the necessary information in case of defects being on the surface of object like iron plate. In addition, the dependence of filtering characteristics on parameters such as the pitch and width of slits is analyzed and the surface defect detection system is constructed. Several experiments were carried out for determining the adequate spatial filtering method through comparing and analyzing effects of parameters like defect's size and shape, intensity of light, noise of coherent source and slit number.

• Journal of Navigation and Port Research
• /
• v.34 no.6
• /
• pp.471-477
• /
• 2010

In recently, IMO consider including an marine casualty factor when Port State Control Inspection evaluate.. This paper proposes an evaluation to Target Factor Values of Port State Control Inspections(PSCITFV) using absolute measurement. To this solve, therefore, this paper used the absolute measurement which is informed compensate the defect and the more rational and objective methode, checked the effectiveness to compare an result with absolute measurement and PSCITFV of Tokyo MOU using Wilcoxson test. Finally, rate change of PSC was investigated by an experiment which changed the values of evaluation factors. As a result, it was evaluation factors of high rate change that was detention, ship's age, casualty factors. Therefore, this factors have to a priority management to do for prevent of PSC.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.585-594
• /
• 2017

Drones, which were first developed for the military use, have been widely applied in various industrial fields through the rapid development of element technology. Following this trend, the marine industry has started to utilize drones for maintenance and inspection purposes, especially, in Europe. To extend the use of drones in the marine industry, this paper first discusses the necessity of drones for the marine use by presenting problems related to maintenance and inspection works on ships and offshore plants. In addition, the technical levels of advanced countries where drones have been commercialized already in the marine industry are mentioned. Furthermore, technical challenges that must be solved are explained in preparation for a drone era in the marine industry. Lastly, the potential growth of the drone market in the marine industry is considered.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.4
• /
• pp.375-383
• /
• 2009

The purpose of this study is to examine the U.S. Coast Guard's origins and powers with respect to the warrantless searches of vessels at sea. In principle, searches and seizures of vessels at sea require a warrant. However, a ship at sea may easily slip away and destroy evidence while authorities attempt to get a warrant. Thus, warrantless searches and safety inspection need to be validated because of the exigent circumstances at the sea. There are also two kinds of exceptions that justify warrantless searches at sea namely, border searhes and administrative searches. These theories in the U.S. will be useful for legislation and law enforcement related to the Korea Coast Guard's mission.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.4
• /
• pp.449-457
• /
• 2016

Cylindrical array sensor of a surface ship to detect an enemy is normally installed in the sonar dome. Reflected signals by some structures inside the sonar dome make unwanted signals. To minimize unwanted signals, acoustic baffles are used. Acoustic baffles are hard to install and replace, so the durability of acoustic baffles is an important design parameter. To verify the durability of acoustic baffle, accelerated aging tests according to temperature and pressure were performed. Acoustic baffle specimens were made and they are tested the visual and the performance (echo reduction and transmission loss) inspection before and after aging. After the inspection, the effect of accelerated aging of the acoustic baffles were discussed.

• Journal of Digital Convergence
• /
• v.12 no.4
• /
• pp.245-249
• /
• 2014

An app based on the augmented reality and QR codes is developed in this paper. This app is for guidance to the harbor and management the facilities in ships. Using the smart device app people could receive guidance the course to visit Mokpo harbor and information for the port and ship's facilities. Through the utilization of smart devices, the app is easy to find the desired destination to and provide the convenience of tourists. In addition, by using the QR code people could see an explanation of the ship's facilities and write the inspection reports for the facilities.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.3
• /
• pp.8-14
• /
• 2013

Although there are various factors that threaten the security of ships, one of the most harmful is corrosion. It is not easy to find corroding areas and the status of corrosion, even though corrosion causes serious problems such as submergence and marine pollution as a result of leaking oil and polluted water. To monitor the corrosion of ships, non-destructive inspection, weight loss coupons, electrical resistance, linear polarization resistance, zero resistance ammeter, and electrochemical impedance spectroscopy have been developed. However, these methods require much time to detect corrosion, and most are not appropriate for real time monitoring. Coating, sacrificial anode, and impressed current cathodic protection (ICCP) methods have been developed to control corrosion. The ICCP and sacrificial anode methods are the most popular ways to prevent ship corrosion. However, ICCP is only appropriate for the outside of a ship and cannot be used for complex structures such as ballast tanks because these are composed of many separate chambers. Sacrificial anodes have to be replaced periodically. This paper proposes an integrated corrosion monitoring and control system (ICMCS) that can detect corrosion in real time and is appropriate for complex structures such as ballast tanks. Because the system uses titanium for an anode, exhausted anodes do not need to be replaced.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.21
• /
• pp.66-77
• /
• 2006

Stainless steel has been stably used closed by passivity oxidation films(Cr₂O₃) is made by neutral atmospheric environment. However, passivity oxidaton films of the surface of stainless steel occasionally comes to be destroyed in seawater which is influenced by an environment having galogen ion like Cl‾, then, localization corrosion comes to occur Stainless steel 304 for shaft system material of the small-size FRP fishing boat on seawater environments made an experiment on simulation of sacrifical anode(Al, Zn). Through these experiment and study, following results have been obtained ; According to the field inspection and corrosion simulation, the corrosion on the 2nd class stainless steel shaft(STS304) in FRP fishing boat has been verified to occur by crevice corrosion and galvanic corrosion etc., According to the comparison and analysis of Stainless steel 304 was severely corroded, but, protected shaft specimen was not totallay corroded. This result is assumed to be made by the facts that anodic reaction, Fe → fe²+＋ 2e¯, has been restricted by the cathodic protection current of sacrificial anode material.