• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.740-745
• /
• 2016

Cables are installed for tens of thousands of connections between various pieces of equipment to operate and control a commercial ship. The correct shortest-route data is necessary since these are complicated cable installations. Therefore, an overfill interval commonly exists in the shortest paths for cables as estimated by Dijkstra's algorithm, even if this algorithm is generally used. It is difficult for an electrical engineer to find the overfill interval in 3D cable models because the occupancy rate data exist in a data sheet unlinked to three-dimensional (3D) computer-aided design (CAD). The purpose of this study is to suggest a visualization method that displays the cable path and overfill interval in 3D CAD. This method also provides various color visualizations for different overfill ranges to easily determine the overfill interval. This method can reduce cable-installation man-hours from 7,000 to 5,600 thanks to a decreased re-installation rate, because the cable length calculation's accuracy is raised through fast and accurate reviews based on 3D cable visualization. As a result, material costs can also be reduced.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.1-7
• /
• 2020

In recent years, cargo lashing has received much importance, to help prevent the sinking of passenger ships due to the failure of vehicle and cargo lashing during the transshipment of cargo. Consequently, the standards for lashing equipment and the structure of car ferries have been revised. According to the current standards, all vehicles loaded on a car ferry sailing in smooth sea areas must be secured if the wind speed and wave height exceed 7 m/s and 1.5 m, respectively. In this study, we measured the roll and pitch of a passenger ship sailing in smooth sea areas, and compared the measurements with the results of the New Strip Method (NSM). The vessel had a maximum pitch of 1.41° and a maximum roll of 1.37° at a wind speed of 6-8 m/s and a wave height of 0.5-1.0 m, and a maximum pitch of 1.49° and a maximum roll of 2.43° at a wind speed of 10-12 m/s and a wave height of 1.0-1.5 m. A comparison of the external forces due to the motion of the hull and the bearing capacity without lashing indicated that the bearing capacity was stronger. This suggests that vehicles without lashing will not slip or fall due to weather conditions. In future, the existing vehicle lashing standards can be revised after measuring the hull motions of various ships, and comparing the external force and bearing capacity, to establish more reasonable requirements.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.646-653
• /
• 2018

Marine accidents caused by dragging anchors occur constantly due to enlargement of ships' size and unusual weather conditions. Nevertheless, vessel operators rely on their experience because the calculations of actual holding power and external forces are complex and inconvenient. The purpose of this study was to propose a program for the anchor dragging risk assessment in order to provide crew and VTSO with the information to determine easily the danger of dragging and take appropriate action. The input data in this program were composed of the ship's basic particulars, anchoring condition, and external environment etc. on calculating for the wind pressure, frictional force, drift force, and holding power. Three dragging anchor accidents were applied to the program's data input at the time of the day, then the result was assessed by 'warning', which was verified with a high confidence. As a result, the risk of dragging anchors can be predicted in advance through this program. In further studies, it is necessary to simplify the input data and improve user convenience through automatic input from various equipment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.541-546
• /
• 2020

The surveillance radar for naval ships is an essential equipment of a battle system that executes the detection and tracking of targets, and the shooting support function; it calculates the three-dimensional track of the target range, azimuth, and altitude to carry out its duty. The surveillance radar consists of an antenna, a transceiver, a processing unit, and an air dryer section. The radar radiates the transmission signal on the antenna section, receives the reflected signal from the target, and amplifies the signals on the transceiver section. The signal received from the antenna is used to provide the operator with target information in various ways. This study identified the display problems when the information about the target is displayed through the radar. The causes of the problems were analyzed and improved. The tracking disappearance phenomenon caused by the altered-course of the ship was improved on the TWS tracking algorithm. The validity of the improved TWS tracking algorithm was confirmed by the normal condition of the target status on the B-scope.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.3
• /
• pp.337-342
• /
• 2014

This paper is aims to build the advancement structural model of GICOMS through identification of required system and improvement for implementation of e-Navigation. We derived nine improvement subject for model of advanced GICOMS through the analysis of problems for GICOMS and brainstorming with expert in the maritime safety. And we analyzed the structure of nine improvement subject using by FSM(Fuzzy Structural Modeling) method, and proposed a structural model that to grasp the correlation between elements. As a result, we found out that "advancement of GICOMS" is the final goal, and "improvement a system of information production", "improvement a scheme of information providing", "linkage between GICOMS and VTS" and "building global networks for safety cooperation" are located lowest level. Especially, "advancement of GICOMS" is influenced by "advancement function of VMS" and "Activation of usage" on middle level. We suggested that utilizing state-of-the-art IT facilities, equipment and expertise to improve and enhance the user-centered transition such as maritime workers for advancement of GICOMS based on proposed structure model.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.655-662
• /
• 2016

This study proposes that a diving supervisor, who can perform the role of both a field manager and a supervisor, be introduced in the national qualification system. The goal was achieved by surveying the general status of the commercial diving sector, including the statistics of an underwater construction company, commercial diving equipment operation condition, diver working hours, diver supply and demand status, and underwater construction market size. The national qualification and national competency standard (NCS) systems were also analyzed to deduce the role definition and work scope of the diving supervisor. Consequently, the following proposition is made: the diving supervisor should be an "on-site manager with the highest job skill in the commercial diving field, who can perform the on-site process management as well as guide, supervise, and educate project participants and serve as an intermediary between the contractor and the workers." The responsibilities of the diving supervisor are proposed to include "diving planning and operation of the diving team," "diving with surface-supplied air and mixed-gas diving system," "chamber operation," "underwater construction," and "ship salvage." The persistent issues in commercial diving sectors, such as diver career development, management, and worker supervision, are expected to be largely resolved with the introduction of this qualification.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.6
• /
• pp.513-520
• /
• 2016

Many surface protection methods have been developed to apply to constructional steels which have been used under severe corrosive environments. One of these methods, hot dip galvanizing is being widely used to the numerous constructional steels such as a guard rail of high way, various types of structural steel for manufacturing ship and for some other industrial fields etc.. Recently, the cost of zinc is getting higher and higher, thus, it is considered that improvement of hot dip galvanizing process to reduce the cost of production should be developed possibly. In this study, additives such as acid cleaning solution, $NH_4OH$, $Al(OH)_3$ and $H_2O_2$ were added to flux solution, and omission of water washing treatment after acid cleaning was investigated with some types of flux solutions added with some additives mentioned above. The decrement of pH by adding the acid cleaning solution could be controlled due to neutralization reaction with addition of $NH_4OH$. The flux solution added with both $NH_4OH$ and $Al(OH)_3$ exhibited nearly the same color and pH value as those of orignal flux solution with no added, and the sample dipped to the flux solution which was added with additives mentioned above indicated a relatively good corrosion resistance compared to other samples. However, the flux solution added with $NH_4OH$, $Al(OH)_3$ and $H_2O_2$ exhibited a different color, sediment and a bad corrosion resistance. Consequently, it is considered that omission of water washing treatment may be able to perform by adding optimum additives to the original flux solution.

• Journal of Korea Port Economic Association
• /
• v.30 no.4
• /
• pp.219-254
• /
• 2014

Due to the recent development of globalization and supply chain management, growth of international trade has led to increasing cargo volume around the world. Since maritime logistics environments have changed, increased container ship size, improvement of harbor equipment, global port operation and rapid technological development have had an significant effects on shipping and port industry, which is contributing to competitiveness of port. Since a larger volume of port throughputs are generally regarded as an indicator of the more competitive port, inefficient port operation could reduce its competitiveness. On the other hand, high efficient ports could increase their competitive power while increasing cargo volume. This study aims at comparing competitiveness of the ports in the Northeast Asia by investigating changes of container throughputs and evaluating efficiency performance of ports. Shift-Share analysis and Data Envelopment Analysis(DEA) have been conducted with 21 Northeast Asian ports and then separated them into 4 groups for comparative analysis to identify competitive position of each port. The results of this study show that Incheon and Gwangyang port have been decreased container cargo volume, while volume of Busan port would increase by means of active marketing, various route development and incentive policy for the port.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.389-397
• /
• 2018

Modern countries have almost ratified the UN Convention on the rights of persons with disabilities and are creating environments to prevent discrimination against these individuals. In 1996, the International Maritime Organization presented a recommendation for the design and operation of passenger ships to respond to elderly and disabled persons' needs. In Korea, an act on the promotion of transportation convenience for mobility disadvantaged persons has been implemented, and facilities for the disabled have been rapidly installed in ships, vehicles, aircraft, railways and passenger terminals. However, the maritime transport environment is less concerned about disabled persons than safety. In this study, basic research was conducted to improve the maritime transport environment for disabled people in Korea through a field survey and literature survey. As a result, it was found that relevant laws and regulations have not been properly applied to excursion ships and ferries as well as small-scale ports, which are responsible for a large part of coastal passenger transportation. In addition to low installation rates of facilities for the transportation of persons with disabilities in ships and terminals, loose equipment was also considered. Therefore, it is necessary to protect the human rights of persons with disabilities, which are universal values of humanity, by complementing laws and introducing improved facilities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.451-458
• /
• 2019

Reliability in the course of weapons system development and operation is a key measure of the ability of a system to perform the required functions under specified conditions over a specified period of time, and the mission confidence for the assessment of mission fulfillment is an important indicator of victory or defeat in a battle. Mission reliability indicates the probability that a given task will succeed or fail in an event or environmental situation over a given period of time. The existing mission reliability was calculated after creating a confidence blow map with only physical connections based on the mission. However, as modern weapons systems evolve and advance, the related equipment structure becomes increasingly complex, making it impossible to express mission relevance when mission classification is required based on functional or physical connections. In this study, the mission reliability was calculated for a gun control system, which is part of a ship's combat system, by expressing the association between the physical and functional structures using the design structure matrix technique and the interface matrix technique. We expect the study results to be used as verification data for mission reliability.