• 한국해양공학회지
• /
• 제27권2호
• /
• pp.87-92
• /
• 2013

The variation in the course keeping ability in relation to rudder type is investigated using simulations with 3 different types of rudders (a normal rudder, normal rudder with a plate, and Schilling rudder) under wave conditions. The simulation is developed based on an MMG model with Kijima's regression model, along with the data from Son's experiments and Kose's experiments. A 3-D source distribution method is applied to calculate the source of the external wave forces for the simulation. The coefficients of an autopilot controller that may affect the course keeping ability are also estimated from the simulations with the different rudders. The course keeping ability is evaluated by comparing the forward distances while the ships are simulated with the rudders and autopilot controller.

• 한국산업융합학회 논문집
• /
• 제26권2_2호
• /
• pp.315-325
• /
• 2023

Recently, various dynamic risk analysis methods have been suggested for estimating the risk index by predicting the possibility of accidents and damage. It is necessary to maintain and support the safety system for responding to accidents by continuously updating the probability of accidents and the results of accidents, which are quantitative standards of ship risk. In this study, when a LNG leakage that may occur in the LN G Fuel Gas Supply System (FGSS) room during LN G bunkering operation, a reliability physical model was prepared by the change in monitoring data as physical parameters to estimate the accident probability. The scenario in which LNG leakage occur were configured with FT (Fault Tree), and the coefficient of the covariate model and Weibull distribution was estimated based on the monitoring data. The possibility of an LNG leakage, which is the top event of FT, was confirmed by changes in time and monitoring data. A method for estimating the LNG leakage based on the reliability physical analysis is proposed, which supports fast decision-making by identifying the potential LNG leakage at the accident.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.611-617
• /
• 2008

Nowadays Plate Heat Exchanger (PHE) is widely used in different industries such as chemical, food and pharmaceutical process and refrigeration due to the efficient heat transfer performance, extreme compact design and efficient use of the construction material. In present study, discussed main conception of plate heat exchanger and applied in vacuum. PHE and aimed apply in the fresh water generator which installed in ship to desalinate seawater to fresh water use heat from engines. The experiment is proceeded to investigate the heat transfer between cold and hot fluid stream at different flow rate and supply temperature of hot fluid. Generated fresh water as outcome of the system. PHE is an important part of a condensing or evaporating system. One of common assumptions in basic heat exchanger design theory is that fluid is to be distributed uniformly at the inlet of each fluid side and throughout the core. However, in practice, flow mal-distribution is more common and can significantly reduce the heat exchanger performance. The flow and heat transfer are simulated by the k-$\varepsilon$ standard turbulence model. Moreover, the simulation contacted flow maldistribution in a PHE with 6 channels.

• 한국항해항만학회지
• /
• 제29권8호
• /
• pp.709-714
• /
• 2005

본 논문의 목적은 우리 항만이 동북아 거점항만으로 변신하는데 필요한 항만공급사슬전략을 도출하여 거점항만으로의 발전전략의 적합성을 분석하였다. 경쟁항만의 발전 잠재력을 충분히 고려하고 우리 항만의 시설${\cdot}$서비스수준의 미흡성을 하루속히 보완하는 유연한 항만 공급능력의 확보, 항만리드타임(접안시간, 양하역시간 등)의 최소화와 뭍류서비스를 극대화${\cdot}$다양화할 수 있는 모듈방식의 항만운영의 다양화가 필요함을 검증하였다. 특히, 거점항만 개발전략에서 다양한 부가서비스의 제공과 실질적인 부가가치를 창출할 수 있는 방향으로 항만배후부지 개발이 매우 중요한 것으로 나타나고 있다.

• 해양환경안전학회지
• /
• 제18권2호
• /
• pp.85-93
• /
• 2012

HS-SPME법을 이용하여 한국 서남해 연안해역에서 Sea-nine 211, Irgarol 1051, Diuron과 같은 방오제의 분포 특성을 검토하였다. 반감기가 짧은 Sea-nine 211은 모든 시료채취지점 및 지역의 해수와 퇴적물에서 아주 낮은 농도 또는 검출한계 이하로 분포하였다. Irgarol 1051은 해수 및 퇴적물에서의 최고 농도가 각각 $6.98{\mu}g/L$, 28.50 ng/g-dry wt로 검출되었으며, 지역별 분포 특성은 나타나지 않았다. 반감기가 가장 길고 생물 농축성이 강한 Diuron은 모든 시료채취 지점에서 Sea-nine 211과 Irgarol 1051보다 높은 농도로 분포하였으며, Mo7(목포)의 퇴적물에서 최고농도(3882.22 ng/g-dry wt)로 분석되었다. Irgarol 1051과 Diuron은 조선산업단지 및 선박정박지가 위치하고 있는 지점에서 높은 농도로 분포하는 것으로 나타났다. 또한 퇴적물에서의 방오제 분포는 내만에서 외만으로 그 농도가 낮아졌다. 이러한 결과로부터 방오제는 내만에 위치하고 있는 항구나 조선산업단지로부터 오염될 가능성이 높을 것으로 판단된다.

• 수산해양기술연구
• /
• 제55권2호
• /
• pp.105-120
• /
• 2019

The species composition and abundance variations of fishery resources in the adjacent marine ranching area, Tongyeong, Korea, were investigated by shrimp trawl, gill net, and longline during the period of July, September, and October in 2016. During the study period, the total catch were 8,522.9 kg with 34 species from the shrimp trawl, 32 species from the gill net, and nine species from the longline. The dominant species were different by gear, which were Hypodytes rubripinnis and Parapercis sexfasciata in the shrimp trawl, Platycephalus indicus and Raja kenojei in the gill net, and Conger myriaster and Scomber Japonicus in the longline. In terms of spatial distribution, Yongchodo showed the highest total catch in number as well as of in weight while Jukdo showed the lowest total catch in number and Bijindo showed the lowest total catch in weight. The amount of demersal fish resources in the survey area estimated as 301 ha, was 99,396 individuals which was converted to be 8,552.9 kg. The amount of demersal fish resources by gear were of trawling area, which area is 127 ha, were 76,251 and 3,489.5 kg, 74 ha in the gill net and longline survey area was 16,213 and 3,457.3 kg, and the other 100 ha area was 6,932 and 1,606.1 kg. In this study, the minimum resources for demersal fish is 61,687 and 4,265.2 kg, and the maximum is 149,439 and 14,197.9 kg.

• 한국항만학회지
• /
• 제11권2호
• /
• pp.321-337
• /
• 1997

Rapid change in the technological environment of marine transportation and the development of the ocean shipping industry have fostered a revolution in the port system. This in turn has caused major changes in the function and use of port in Korea. Aside from this. Mokpo Port, however continues to decline, because the existing port facilities and related subsystem are already obsolete with no chance of regaining operational effectiveness and treatment for proper implementation. Although a few studies have been done on the Mokpo Port, has not been found, any reseach for the analytical approach to the transportation system of it. This paper aims to make an extensive analysis of the physical distribution system in Mokpo Port focusing on the coordination of subsystems such as navigational aids system, quay handling and transfer system, storage system and inland transport system. The base of introduced simulation tool here is the queueing theory. The overall findings are as follows; 1. Among those vessels called at Mokpo Port in 1994, the average size of oceangoing vessels is 4,922.1 G/T, and the domestic is 317.8 G/T. The average arrival interval and service time of the domestic vessels are 6.0 hours and 24.1 hours respectively marking the berth occupation rate over 100%. Those for oceangoing vessels are 34.5 hours, 120.0 hours and 37.2%. In order to maintainin the berth occupation rate to 70% the capacity considering the 1994 of domestic piers must be extended to 145% and oceangoing vessels must be increased to 165% year called. 2. The capacity of approaching channel is enough to handle the total traffic volume. 3. Tugs are sufficiently being provided to handle all ships requiring their services 4. The capacity of storage and inland transportation systems are sufficient to handle the throughput and the yard stroage utilization rate of No.1 $\cdots$ No.5 is 4.5% and No.6 1S 30% of 1993's. 5. The utilization rate of LLc(Level Looping Crane) and PNT(PNeumaTic) are 2.7% and 18.8%, respectively. Practical solution and proposal for improvement of Transportation System in Mokpo Port are as follows; 1. To avoid the congestion in domestic pier introduction of a new port operation system is necessary allowing the domestic vessel to use the oceangoing pier. 2. To establish the port management information system to improve the efficiency of port operation. 3. To build a new storage system for high valued cargos including modernization of the present storage and handling system. 4. To insure the safety of navigation in approaching channel, The Vessel Traffic System including separation scheme is introduced. 5. To interest enormously on public relation to ship owner's association, shippers and consignees by showing that they can save cost and ship turnaround time in order to promote the call to Mokpo Port. At last, to be strategically change the function of Mokpo Port to the Leisure, Fishing & Ferry as well as Maritime port.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.96-100
• /
• 2004

In the ship building industry various problems of erection is counterfeited due to formation of bottle necks in the block erection flow pattern This kind of problems cause accumulated problems in real-time erection right on the floor, When such a problem is approached, a support data of the entire erection sequence should be available, Here planning is done by reasoning about the future events in order to verify the existence of a reasonable series of actions to accomplish a goal. This technique helps in achieving benefits like handling search complications, in resolving goal conflicts and anticipation of bottleneck formation well in advance to take necessary countermeasures and boosts the decision support system, The data is being evaluated and an anticipatory function is to be developed This function is quite relevant in day to day planning operation. The system updates database with rearrangement of off-critical blocks in the erection sequence diagram, As a result of such a system, planners can foresee months ahead and can effectively make decisions regarding the control of loads on the man, machine and work flow pattern, culminating to an efficient load management. Such a foreseeing concept helps us in eliminating backtracking related adjustment which is less efficient compared to the look-ahead concept. An attempt is made to develop a computer program to update the database of block arrangement pattern based on heuristic formulation.

• 대한기계학회논문집A
• /
• 제40권1호
• /
• pp.81-86
• /
• 2016

밸브는 배관의 유량을 차단 및 제어하기 위한 장치로써 게이트 밸브, 글로브 밸브, 체크 밸브 등 많은 종류가 사용되고 있다. 그 중 글로브 밸브는 고압력 조건에서의 유량조절이 용이하여 LNG 선박, 증기 배관 등에 사용된다. 본 논문에서는 글로브 밸브의 누설 문제를 구조적으로 해결하기 위해 시트의 형상을 변형하는 방법을 제시하였다. 또한 유한 요소 해석을 통해 각 모델의 응력분포와 변형량을 비교하고 이를 통하여 제안한 모델에 대한 검증을 진행하였다. 시뮬레이션 결과 제안된 모델에서 원주 방향의 변형이 줄어들고, 누설을 감소시킬 수 있는 Self-supporting 효과를 확인할 수 있었다.

• 수산해양기술연구
• /
• 제53권3호
• /
• pp.286-292
• /
• 2017

The Coastal VTS will be continuously constructed to prevent marine traffic accidents in the coastal waters of the Republic of Korea. In order to provide the best traffic information service to the ship operator, it is important to understand the navigation risk factor. In this study, we analyzed the navigational hazards of Gunsan coastal area where the coastal VTS will be constructed until 2020. For this purpose, major traffic flows of merchant ships and density of vessels engaged in fishing were analyzed. This study was conducted by Automatic Identification System (AIS) and Vessel Pass (V-PASS) data. The grid intervals are 10 minute ${\times}$ 10 minute (latitude ${\times}$ longitude) based on the section of the sea. A total of 30 sections were analyzed by constructing a grid. As a result of the analysis, the major traffic flows of the merchant vessels in the coastal area of Gunsan were surveyed from north to south toward Incheon, Pyeongtaek, Daesan, Yeosu, Pusan and Ulsan, and from east to west in the port of Gunsan Port, 173-3, 173-6, 173-8, 183-2, 183-5, 183-8, 183-3, 184-1 and 184-2. As a result of the study, the fishing boats in Gunsan coastal area mainly operated in spring and autumn. On the other hand, the main traffic flow of merchant ships and the distribution of fishing vessels continue to overlap from March to June, so special attention should be paid to the control during this period.