• 한국CDE학회논문집
• /
• 제18권5호
• /
• pp.329-337
• /
• 2013

At shipyards, to enable design cooperation with engineering companies or to meet ship owner's requirements, there is a need to translate ship models from one ship CAD system to another ship CAD system. In this paper, a method for translating pipe models from Aveva Marine to SmartMarine3D is introduced. Related data and architecture of translation system are addressed and specific details to be considered during translation are explained. The introduced method has been implemented and tested in a shipyard.

• 한국CDE학회논문집
• /
• 제18권3호
• /
• pp.167-176
• /
• 2013

It is necessary to construct equipment catalog in ship outfitting design and offshore plant design. The three-dimensional CAD data of equipment take on different level-of-detail depending on the purpose. Equipment suppliers provide CAD data with high complexity while ship designers need CAD data with low complexity. Therefore, it is necessary to simplify CAD data. However, it takes much time to simplify them manually. To resolve the issue, a system for automatically simplifying the 3D CAD data of equipment was developed. This paper presents the architecture of the system and the implementation details. In addition, experiment result using the prototype system is explained.

• 한국CDE학회논문집
• /
• 제21권2호
• /
• pp.186-195
• /
• 2016

The finite element modeling of a ship for hull structural analysis on the basis of new harmonized common structural rules (CSR-H) is to be extended to the cargo holds in fore and after body of a ship. Unlike the parallel middle-body where the external and internal features of hull are equal along to the longitudinal direction of a ship, in fore and after body, the external and internal features of hull vary linearly or even irregularly in forms of a surface or a curve along to the longitudinal direction of a ship. Thus, it needs lots of design man-hours for the modeling for structural analysis. In order to save man-hours in initial structural design phase of a ship, the specified 3D CAD system has been adopted in shipbuilding industry. Through the interface between CAD and CAE (rule scantling and direct strength assessment), design man-hour in initial design phase can be saved even under the environment of CSR-H.

• 한국CDE학회논문집
• /
• 제10권4호
• /
• pp.244-253
• /
• 2005

In the initial ship design stage of shipyards, the hull form design, the basic design (compartment modeling and ship calculation), and the hull structural design are being performed by different systems. Thus, the problem on interfaces between these systems occurs. To solve this, we developed the hull form design system 'EzHULL' and the compartment modeling and ship calculation system 'EzCOM-PART' for developing finally an integrated ship design system. And, in this study, we present an object-oriented hull structural design .system 'EzSTRUCT', which is developed recently. A structural design in an initial design stage can be frequently changed, because the design is not firmly determined yet. Therefore, designers perform the simplified structural modeling with bigger structural parts (or objects) such as deck, longitudinal bulkhead, etc. in the initial design stage, and the detailed structural modeling with smaller structural parts such as plate, seam, slot, etc. in the detailed design stage. However, the existing hull structural CAD system used in a shipyard is not efficient in generating a 3D CAD model in the initial design stage, because it has difficulty in handling frequent changes in design. Therefore, designers initially draw 2D drawings in the initial design stage, and generate the 3D CAD model from these 2D drawings in the detailed design and production design stages. In this study, the hull structural design system, which can efficiently generate a 3D CAD model through rapid modeling at an initial design stage, was developed in this study To evaluate the applicability of the developed system, we applied it to hull structural modeling of various ships such as a VLCC, a bulk carrier, etc. As a result, it could efficiently generate a 3D CAD model of a hull structure.

• 대한조선학회논문집
• /
• 제38권2호
• /
• pp.71-78
• /
• 2001

조선분야에서 CNC, 혹은 CAM이 사용되는 분야는 주로 강재 절단, 프로펠러 제작 자동화와 수조 실험용 모델제작에 관한 것이며 대학에서는 대부분 선형과 구조 설계용 CAD 연구를 수행하고 있고 CAM 분야는 활성화되어 있지 않은 편이다. 본 문에서는 Pro/Engineer CAD 시스템으로 3차원 선체 형상을 모델링 하고 이를 CNC 공작기계로 제작하는 과정을 수행하고 부수적으로 이기종 소프트웨어간 데이터 교환을 위한 중립 데이터 양식에 관한 기초 조사연구도 하였다. CIM 과정에서 소프트웨어간의 형상 정보 교환 시 IGES, STEP을 사용할 수 있으나 본 연구에 적용된 CAM s/w에서 STEP을 인식할 수 없어 IGES를 사용하였고 TRIMC VMC 공작기계의 제작물 크기에 제한이 있어 작은 규모의 선박 모형(prototype) 가공을 수행하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.819-824
• /
• 2007

Outfitting system in ship design has huge kinds of standard part. Data base of and automatic design procedure of part master should be included in ship cad in order to reduce the design time. Present study shows an process of part master DB construction of pipe equipments using 3-dimensional CAD environment Attribute and properties of part masters are chosen from JIS standard. As the schema of part masters are stored in data base, 3D geometric model is parsed from the schema.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.259-261
• /
• 2016

Cable은 모든 선박의 전기설비에 사용되는 전선으로써 Cable 없이는 선박의 운항이 힘들 정도로 중요한 비중을 차지하고 있다. 이러한 Cable들이 잘못 설치 될 경우 재작업에 따른 시간, 설치비용, 자재비 증가 등이 발생하는 문제점이 있다. 본 논문에서는 이러한 문제점을 설계단계에서 검증 하고자 텍스트 데이터로 존재 하는 Cable 경로를 3D CAD 상의 모델에 색상을 입혀 가독성을 높이고 정확한 경로 검증을 하기 위하여 Cable 경로 가시화를 구현하였다. 이를 통해 설계단계에서 정확한 경로 검증이 이루어져 설치 현장에 정확한 경로 정보가 전달됨에 따라 재작업 비율이 감소하여 작업시간 단축 및 자재비 절감 효과를 얻을 수 있다.

• 대한조선학회논문집
• /
• 제40권6호
• /
• pp.58-68
• /
• 2003

Despite the availability of 3D CAD systems, the designers in shipyards still use 2D CAD systems because of the need to produce drawings rapidly and a shortage of labor. The design information of ship structure contained in 2D drawings is represented by symbols that are well known among designers in shipyard. The shapes of symbols are recognized by analysis of experienced and knowledgeable designers. We propose a method for automatic recognition of 2D symbols and extraction of design information from the midship drawings. The shape and rationale of 20 symbols used in ship design have been analyzed, and symbols have been classified according to the analysis. Based on the classified symbols, the developed system recognizes the symbols expressed in 2D drawings. The meaningless geometric shape is translated into the design information including designer's intents. The extracted design data can be applied to the downstream design process in shipyards, and the 3D ship model can be automatically created.

• 대한조선학회논문집
• /
• 제43권3호
• /
• pp.362-374
• /
• 2006

Currently, all design information of a hull structure is being first defined on 2D drawings not 3D CAD model at the initial ship design stage and then transferred to following design stages through the 2D drawings. This is caused by the past design practice, limitation on time, and lack of hull structural CAD systems supporting the initial design stage. As a result, the following design tasks such as the process planning and scheduling are being manually performed using the 2D drawings. For solving this problem, a data structure supporting the initial design stage is proposed and a prototype system is developed based on the data structure. The applicability of the system is demonstrated by applying it to various examples. The results show that the system can be effectively used for generating the 3D CAD model of the hull structure at the initial design stage.

• 대한조선학회논문집
• /
• 제35권4호
• /
• pp.98-108
• /
• 1998

중앙 단면도 등의 선박의 초기 구조설계는 여러 가지 이유로 2차원으로 설계되어 다른 설계부서에 도면으로 전달되고 있다. 본 연구에서는 기능이 서로 다른 여러 가지 컴퓨터 시스템사이의 데이터 교환을 위한 예제로, AutoCAD로 작성된 2차원의 초기 구조 설계 데이터를 구조해석(FEM) 시스템이나 상세설계 시스템(AutoDef)등의 다른 시스템에서 사용할 수 있는 데이터를 생성해 보았다. 이를 위해 STEP 제품모델의 방법에 따라 데이터가 정의 되었으며 2D 형상이나 3D 와이어프레임, 솔리드 모델등 다양한 형상을 다룰 수 있는 복합다양체 모델링 형상 도구인 ACIS가 사용되었다.