• 한국항해항만학회지
• /
• 제37권4호
• /
• pp.329-335
• /
• 2013

This paper is to develop the position error equations including the attitude errors, the errors of nadir and ship's heading, and the errors of ship's position in the free-gyro positioning and directional system. In doing so, the determination of ship's position by two free gyro vectors was discussed and the algorithmic design of the free-gyro positioning and directional system was introduced briefly. Next, the errors of transformation matrices of the gyro and body frames, i.e. attitude errors, were examined and the attitude equations were also derived. The perturbations of the errors of the nadir angle including ship's heading were investigated in each stage from the sensor of rate of motion of the spin axis to the nadir angle obtained. Finally, the perturbation error equations of ship's position used the nadir angles were derived in the form of a linear error model and the concept of FDOP was also suggested by using covariance of position error.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.162-165
• /
• 1995

For an accurate on-line measurement of the ship's attitude the paper develops an intelligent sensing system which uses one servo-type accelerometer and two servo-type inclinometers appropriately located on the ship. By considering the dynamics of the servo-controlled rigid pendulums of the inclinometers, linear equations for the rolling and pitching of the ship are derived separately from each other. Moreover, one accelerometer is used for extracting the heaving signal. Through the introduction of linear dynamic models and the linear observation equations for the heaving, rolling and pitching, the on-line measurement of the three signals can be reduced to the state estimation of the linear dynamic systems. A bank of Kalman filters is adaptively used to achieve the on-line accurate state estimation and to overcome changes in parameters in the linear dynamic models.

• 수산해양기술연구
• /
• 제51권3호
• /
• pp.285-294
• /
• 2015

As a "kind of" mature ship form, planing hull has been widely used in military and civilian areas. Therefore, a reasonable design for planing hull becomes more and more important. For planing hull, resistance and trim are always the most important problems we are concerned with. It affects the planing hull's economic efficiency and maneuverability very seriously. Instead of the expensive towing tank experiments, the development of computer comprehensive ability allows us to previously apply computational fluid dynamics(CFD)to the ship design. In this paper, the CFD method and Goal Driven Optimization (GDO) were used in the estimations of planing hull resistance and running attitude to provide a possible method for performance computation of planing hull.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.626-637
• /
• 2014

On ship, especially on large ship, the flexure deformation between Master (M)/Slave (S) Inertial Navigation System (INS) is a key factor which determines the accuracy of the integrated system of M/S INS. In engineering this flexure deformation will be increased with the added ship size. In the M/S INS integrated system, the attitude error between MINS and SINS cannot really reflect the misalignment angle change of SINS due to the flexure deformation. At the same time, the flexure deformation will bring the change of the lever arm size, which further induces the uncertainty of lever arm velocity, resulting in the velocity matching error. To solve this problem, a $H_{\infty}$ algorithm is proposed, in which the attitude and velocity matching error caused by deformation is considered as measurement noise with limited energy, and measurement noise will be restrained by the robustness of $H_{\infty}$ filter. Based on the classical "attitude plus velocity" matching method, the progress of M/S INS information fusion is simulated and compared by using three kinds of schemes, which are known and unknown flexure deformation with standard Kalman filter, and unknown flexure deformation with $H_{\infty}$ filter, respectively. Simulation results indicate that $H_{\infty}$ filter can effectively improve the accuracy of information fusion when flexure deformation is unknown but non-ignorable.

• 한국항해항만학회지
• /
• 제41권3호
• /
• pp.93-102
• /
• 2017

일반적으로 VTSO(Vessel Traffic Service Operator)는 양 선박의 충돌위험 정도를 판단할 때, 선박들의 침로와 속력, DCPA(Distance to CPA)와 TCPA(Time to CPA) 그리고 양 선박의 조우 상황 등을 종합적으로 고려한다. 이에 본 연구에서는 VTS(Vessel Traffic Service) 관점에서의 선박충돌위험을 예측하는 방법으로 위험지수(Risk Index, RI)를 선박 조우 상황에 따른 위험, 선박 간 근접거리에 따른 위험 그리고 접근시간에 따른 위험으로 나누어 구하고, VTSO의 위험 태도를 반영한 충돌 위험도를 제안하였다. 위험지표의 각 계수와 위험 태도는 VTSO 설문을 실시하여 구하였고, 제안한 위험도의 타당성 검증을 위하여 부산항의 실제 사고 사례에 ES(Environmental Stress) 모델의 교통 환경 스트레스치($ES_S$)을 함께 적용하여 유효성을 확인하였다.

• 한국항해학회지
• /
• 제12권1호
• /
• pp.71-84
• /
• 1988

For traffic proceeding in random directions on a plane surface the frequency of collision, if no avoiding action in taken ,is approximately proportional to the square of the traffic density and directly proportional to the size and speed of the ship, Avoiding is normally taken and the rte of collisions is therefore also governed by additional factors such as the visibility, the effectiveness of the collisionavoidance rules, the competence of personnel or watchkeeping attitude, the maneuverability of the ship and the efficiency of radar and other equipments. From the viewpoint of watchkeeper who is responsible for maneuvering, watchkeeping attitude such as lookout and action to avoid collision is the most controllable factor among those mentioned above. In practice, according to the investigation of the institution of marine courts, about 50% co collisions occurred is caused by disorbedience to steering and sailing rules of international regulations for preventing collision at sea including lookout. So we classify the process of collisions with first sight of another ship , assessment of risk of collisions and action to avoid collisions and make a factural survey about lookout and action to avoid collisions from the point on "time" and " distance", namely relationship among ship's size, speed, first sight time of another ship, action to avoid collisions ,and distance from sight of another ship to collision occurred. According to the results of the actual survey , we come to conclude that most of collisions occurred are due to improper lookout and ineffective action to avoid collision which means time lag from first sight of another ship to time of action taken to avoid collision is relatively long. is relatively long.

• 한국군사과학기술학회지
• /
• 제14권2호
• /
• pp.181-188
• /
• 2011

A simulation technique, which simulate dynamic motion and communication environments of ship in the lab, is needed in order to reduce the testing cost when we evaluate the transfer alignment performance of shipboard INS. Hardware-In-the-Loop Simulation(HILS) can be used as an effective test method for those system because it can provide flexible and realistic simulation environments, various test scenario, and repeated test environment in the lab without additional cost and person. This paper presents the methods for implementing the real time HILS environment for testing transfer alignment performance of shipboard INS. It includes real time executive for controlling realtime simulation and calculating the ship motion, communication method for interfacing between the systems, and coordinate transformation method for converting real ship coordinate attitude data to lab coordinate attitude data.

• 한국군사과학기술학회지
• /
• 제4권1호
• /
• pp.225-233
• /
• 2001

This paper deals with the transfer alignment problem of SDINS(StrapDown Inertial Navigation System) subjected to roll and pitch motions of the ship. Specifically, to reduce alignment errors induced by measurement time-delay and ship body flexure, an error compensation method is suggested based on delay state augmentation and DCM(Direction Cosine Matrix) partial matching. A linearized error model for the velocity and attitude matching transfer alignment system is first derived by linearizing the nonlinear measurement equation with respect to its time delay and augmenting the delay state into the conventional linear state equations. And then DCM partial matching is properly combined to reduce effects of a ship's Y axis flexure. The simulation results show that the suggested method is effective enough resulting in considerably less azimuth alignment errors.

• 대한가정학회지
• /
• 제31권4호
• /
• pp.1-23
• /
• 1993

The purpose of this study are to investigate the actual conditions of urban housewive's sex role attitude, the value consciousness of home management and the satisfaction of household work. Further, basic data fro the improvement of the satisfaction of household work and the value consciousness of home management will be produce through grasping the relationship of them. For these purposes, the data are collected by using questionnaire distributed to 394 housewives living in Taegu. The data are analyzed using frequency, pecentile, one way anova, pearson's correlation analysis, simple regression analysis, multiple regression analysis. The results of this research are as follow: 1. Urban housewive's sex role attitude comparatively took the transitional position and the value consciousness of home management was middle. Housewive's satisfaction of household work was generally usual. 2. There were significant differences in the sex role attitude according to housewive's age, educational level, the youngest child's age, durations of marriage. Specially, the variables which significantly affected sex role attitude were housewive's educational level, the youngest child's age. 3. The value consciousness of home management of urban housewives was variable according to housewive's age and educational level, monthly family income, durations of marriage, the youngest child's age, the type of housing, husband's educational level and job. 4. Among the independent variables, the houswive's educational level was variable to have influence on the satisfaction of household work. 5. There were significant differences in the satisfaction of household work according to housewive's sex role attitude. 6. Among the domains of the value consciousness of home management, the value consciousness about family relationships, consuming, educational and leader ship were variable to have influence on the satisfaction of household work.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권1호
• /
• pp.1-12
• /
• 2016

One of the most important factors in sailing yacht design is accurate velocity prediction. Velocity prediction programs (VPP's) are widely used to predict velocity of sailing yachts. VPP's, which are primarily based on experimental data and experience of long years, however suffer limitations when applied in realistic conditions. Thus, in the present study, a high fidelity velocity prediction method using computational fluid dynamics (CFD) was proposed. Using the developed method, velocity and attitude of a 30 feet sloop yacht, which was developed by Korea Research Institute of Ship and Ocean (KRISO) and termed KORDY30, were predicted in upwind sailing condition.