• Title/Summary/Keyword: Ship's Safety Performance

Search Result 156, Processing Time 0.024 seconds

A Study on the Development of Navigational Safety Evaluation System in Rough Sea (황천시의 항해안전 평가시스템 개발에 관한 연구)

  • 김순갑;이충로
    • Journal of the Korean Institute of Navigation
    • /
    • v.15 no.1
    • /
    • pp.49-65
    • /
    • 1991
  • It is of great importance for any vessel under way, especially in rough sea, to be maneuvered safely with proper seakeeping performance. In this paper, the author aims to develope a navigational safety evaluation system in rough sea by analyzing ship's with the theory of wave spectrum using random process analysis and the theory of evaluating the seakeeping performance. The scope and the method of this study are as follows ; (1) Modelized typhoon mathematically to represent the sea condition in rough sea. (2) Estimated sea conditions by getting wave spectrum, supposing that the wave by typhoon is fully developed short crest irregular wave. (3) Defined evaluation factor of vessel's seakeeping performance and obtained response amplitude operators thereby. (4) Obtained the response spectrum of factors on seakeeping performance. (5) Defined and obtained evaluation index, dangerousness, relative and maximum dangerousness of factors on seakeeping performance. (6) Analyzed the calculated dangerousness of evaluation index and picked the vertical acceleration out of 7 factors as the presentative factor on seakeeping performance. (7) Carrid out the judgement of danger by obtaining dangerousness value according to steaming hour, course alteration and speed change. By synthesizing the above items, the authors suggests a computer model of navigational safety evaluation system and examined the validity of the model by computer simulation.

  • PDF

Validation of Ship Detection by the RADARSAT Synthetic Aperture Radar and KOMPSAT EOC: Field Experiments (RADARSAT SAR와 KOMPSAT EOC에 의한 선박 탐지의 검증: 현장 실험)

  • Yang Chan-Su;Kim Sun-Young
    • Proceedings of KOSOMES biannual meeting
    • /
    • 2004.11a
    • /
    • pp.43-47
    • /
    • 2004
  • Two different sensors (here, KOMPSAT and RADARSAT) are considered for ship detection, and are used to delineate the detection performance for their data The experiments are set for coastal regions of Mokpo Port and Ulsan Port and field experiments on board pilot boat are conducted to collect in situ ship validation information such as ship type and length This paper introduce mainly the experiment result of ship detection by both RADARSAT SAR imagery and land-based RADAR data, operated by the local Authority of South Korean, so called vessel traffic system (VTS) radar. Fine imagery of Ulsan Port was acquired on June 19, 2004 and in-situ data such as wind speed and direction, taking pictures of ships and natural features were obtained aboard a pilot ship. North winds, with a maximum speed of 3.1 m/s were recorded Ship's position, size and shape and natural features of breakwaters, oil pipeline and alongside ship were compared using SAR and VTS. It is shown that KOMPSAT/EOC has a good performance in the detection of a moving ship at a speed of kts or more an hour that ship and its wake can be imaged. The detection capability of RADARSAT doesn't matter how fast ship is running and depends on a ship itself, e.g. its material, length and type. Our results indicate that SAR can be applicable to automated ship detection for a VTS and SAR combination service.

  • PDF

A Study on the Optimization of Main Dimensions of a Ship by Design Search Techniques based on the AI (AI 기반 설계 탐색 기법을 통한 선박의 주요 치수 최적화)

  • Dong-Woo Park;Inseob Kim
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.28 no.7
    • /
    • pp.1231-1237
    • /
    • 2022
  • In the present study, the optimization of the main particulars of a ship using AI-based design search techniques was investigated. For the design search techniques, the SHERPA algorithm by HEEDS was applied, and CFD analysis using STAR-CCM+ was applied for the calculation of resistance performance. Main particulars were automatically transformed by modifying the main particulars of the ship at the stage of preprocessing using JAVA script and Python. Small catamaran was chosen for the present study, and the main dimensions of the length, breadth, draft of demi-hull, and distance between demi-hulls were considered as design variables. Total resistance was considered as an objective function, and the range of displaced volume considering the arrangement of the outfitting system was chosen as the constraint. As a result, the changes in the individual design variables were within ±5%, and the total resistance of the optimized hull form was decreased by 11% compared with that of the existing hull form. Throughout the present study, the resistance performance of small catamaran could be improved by the optimization of the main dimensions without direct modification of the hull shape. In addition, the application of optimization using design search techniques is expected for the improvement in the resistance performance of a ship.

A Study on the Effects of High-lift Rudder on Ship's Maneuverability (고 양력 타가 선박의 조종성능에 미치는 영향에 관한 연구)

  • Kim, Sang-Hyun;Kim, Hyun-Jun;Jun, Hee-Chul;Yoon, Seung-Bae;Park, Hwa-Pyeong;Gim, Ok-Sok
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.16 no.4
    • /
    • pp.393-399
    • /
    • 2010
  • Recently, a vessel's maneuvering performance is considered to be an important subject as marine pollution from the ships that stranded on a rock becomes more severe. So, IMO(International maritime organization) has adopted Resolution MSC.l37 to enhance international standards of ship's maneuverability. There's more than one way to improve ship's maneuverability. This research focused on improving ship's maneuverability by high-lift rudder. To predict the maneuverability, the numerical simulation model was used. The evaluation of maneuverability was carried out by turning test and zig-zag test. The results obtained with these simulation showed that the high-lift rudder would be effective in improving the turning ability of the ship. But it was clarified that there Has a possibility that course changing ability night become bad through an increase of rudder lift.

A Study on Ship Motion Measurement System Using ADIS16480 Inertial Measurement Unit (ADIS16480 관성측정장치를 이용한 선체 운동 측정 시스템에 관한 연구)

  • Kim, Daejeong;Yim, Jeong-Bin
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2019.11a
    • /
    • pp.270-270
    • /
    • 2019
  • Although the Inertial Measurement Unit is applied to a variety of applications such as ships, submarines, and aircrafts, it is mainly used in the attitude measurement area. But since such equipment is expensive, it has been used only in special fields. In this study, the ship's seaworthiness is verified by measuring the speed, direction, gravity, and acceleration of the ship in real time using a low-cost Inertial Measurement Unit. A research method for estimating fIuid force coefficients was devised. Therefore, this study measured ship motion factors at sea, processed and analyzed the measured data, and evaluated the overall safety of the ship and estimated the resistance and steering performance of the ship.

  • PDF

Automatic Detection Approach of Ship using RADARSAT-1 Synthetic Aperture Radar

  • Yang, Chan-Su
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.14 no.2
    • /
    • pp.163-168
    • /
    • 2008
  • Ship detection from satellite remote sensing is a crucial application for global monitoring for the purpose of protecting the marine environment and ensuring marine security. It permits to monitor sea traffic including fisheries, and to associate ships with oil discharge. An automatic ship detection approach for RADARSAT Fine Synthetic Aperture Radar (SAR) image is described and assessed using in situ ship validation information collected during field experiments conducted on August 6, 2004. Ship detection algorithms developed here consist of five stages: calibration, land masking, prescreening, point positioning, and discrimination. The fine image was acquired of Ulsan Port, located in southeast Korea, and during the acquisition, wind speeds between 0 m/s and 0.4 m/s were reported. The detection approach is applied to anchoring ships in the anchorage area of the port and its results are compared with validation data based on Vessel Traffic Service (VTS) radar. Our analysis for anchoring ships, above 68 m in length (LOA), indicates a 100% ship detection rate for the RADARSAT single beam mode. It is shown that the ship detection performance of SAR for smaller ships like barge could be higher than the land-based radar. The proposed method is also applied to estimate the ship's dimensions of length and breadth from SAR radar cross section(RCS), but those values were comparatively higher than the actual sizes because of layover and shadow effects of SAR.

  • PDF

A Study on the Refining Performance Improvement of Marine Sludge Fuel Oil(I) (for the temperature and pressure effects in metal filtering element) (선박 슬러지유의 정유성능 향상에 관한 연구(I)(금속여과망의 유압력 및 유온의 영향에 대해서))

  • 한원희;하만식;이진열
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.9 no.1
    • /
    • pp.89-94
    • /
    • 2003
  • As ship's fuel oil recently becomes viscous and the amount of sludge increases, many researches and studies are underway to process the sludge onboard the ship and to recycle it as a fuel for ship's boiler. Of many researches, especially ultrasonic emulsifier to break the particle of sludge into fine pieces is recognized as a most possible recycling device. In this regards, the author investigates the property change of sludge's temperature and pressure at the early stage of the study of ultrasonic emulsifier. This study can be used as a useful dora to determine the proper temperature and pressure to inject the processed sludge in the boiler injector and the results can also be comparable dora with the experimental data by ultrasonic emulsifier. In addition, the results will be a fundamental data to study the filtering efficiency of the sludge particle broken by temperature and pressure. It is expected that this study ultimately play a role to prevent marine oil pollution as the sludge is recycled onboard the ship and used as a fuel for boiler.

  • PDF

A Study on the Analysis and Prevention of the Human-related Marine Accidents (인적 요인을 중심으로 한 해양사고 분석 및 예방 연구 (예부선 사고사례를 중심으로))

  • Kim, Hong-Tae;Na, Sung
    • Journal of Korea Ship Safrty Technology Authority
    • /
    • s.27
    • /
    • pp.25-36
    • /
    • 2009
  • Despite the development of the various navigational equipment, such as GPS, ARPA, ECDIS, AIS, VDR, and hull monitoring system, marine accidents are still a leading concern in shipping industry. For all accidents over the reporting period, approximately 60 to 80% of the accidents was involved in human error. It means that in each case, some events which were associated with human error initiated an accident, and those failures of human performance led to the failure to avoid an accident or mitigate it's consequences. However, the improvement and the effort on the maritime human error are still limited in an elementary step. The objective of this paper is to propose a modified Human Factors Analysis and Classification System (HFACS) model in order to analyse the collision accidents of tug-barge ship.

  • PDF

A Study on the Effect of Wind Force and Moment Acting on T/S HANNARA (실습선 한나라호에 작용하는 풍압력 및 풍압모우멘트 영향에 관한 연구)

  • Lee, Yun-Sok
    • Journal of Navigation and Port Research
    • /
    • v.31 no.3 s.119
    • /
    • pp.223-228
    • /
    • 2007
  • In recent trends of the enlargement and specialization, container ship, LNCG, PCC and passenger ship which have relatively large hull and superstructure above the water line, are already being operated in the world It is very important information for the safety operation of these vessels to estimate the ship's performance under the specific wind condition while berthing, unberthing or low-speed sailing. In this paper, the effect of wind force and moment acting on the training ship HANNARA is investigated by using the numerical calculations. The results of drift angle and counter rudder angle with the relative wind direction and force, the critical wind velocity with the ratio of wind velocity and ship's speed and maximum heeling angle with the wind velocity are shown The presented results can be applied directly to T/S HANNARA in berthing maneuver and avoiding typhoons, and utilized as an educational materials.

Ship nonlinear-feedback course keeping algorithm based on MMG model driven by bipolar sigmoid function for berthing

  • Zhang, Qiang;Zhang, Xian-ku;Im, Nam-kyun
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • v.9 no.5
    • /
    • pp.525-536
    • /
    • 2017
  • Course keeping is hard to implement under the condition of the propeller stopping or reversing at slow speed for berthing due to the ship's dynamic motion becoming highly nonlinear. To solve this problem, a practical Maneuvering Modeling Group (MMG) ship mathematic model with propeller reversing transverse forces and low speed correction is first discussed to be applied for the right-handed single-screw ship. Secondly, a novel PID-based nonlinear feedback algorithm driven by bipolar sigmoid function is proposed. The PID parameters are determined by a closed-loop gain shaping algorithm directly, while the closed-loop gain shaping theory was employed for effects analysis of this algorithm. Finally, simulation experiments were carried out on an LPG ship. It is shown that the energy consumption and the smoothness performance of the nonlinear feedback control are reduced by 4.2% and 14.6% with satisfactory control effects; the proposed algorithm has the advantages of robustness, energy saving and safety in berthing practice.