• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.4
• /
• pp.299-311
• /
• 1994

The new course distances of a ship are one of the important factors of the safety handling as the indices to indicate directly her abilities of course alteration. Recently, International Maritime Organization (IMO) exhorts that all vessels should use maneuvering booklets in which are drawn the curves of new course distances obtained from the test of measuring them and noted other maneuvering performance standard in various navigation conditions. This paper describes the method to calculate many new course distances for many rudder angles by turning circle test without observation or using other calculating methods. The main results are as follows: 1) The mean difference of the distances between two new course distances by the turning circle test and heading test of the experimental ship was about 7.7% vaules of the ones by the heading test. when her altering angles were $48^{\circ}$, $63^{\circ}$and $70^{\circ}$, using the rudder angle of $35^{\circ}$ . These new course distances were therefore found to be small in difference of those. 2) The mean difference of the distance between two new course distances by the turning circle test and the maneuvering indices of the experimental ship was about 4.5% values of the ones by the maneuvering indices, when her altering angles were $48^{\circ}$, $63^{\circ}$and $70^{\circ}$, using the rudder angle of $35^{\circ}$, these new course distances were therefore found to be small in difference of those. 3) The mean difference of the distance between two new course distances by the turning circle test and the observation of the experimental ship was about 6.1% values of the ones by the observation, when her altering angles were $48^{\circ}$, $63^{\circ}$and $70^{\circ}$, using the rudder angle of $35^{\circ}$. These new course distances were therefore found to be small in difference of those. 4) It is confirmed that many new course distances for many angles can be calculated easily by using the method of ship's simple turning circle test, without observation or using the maneuvering indices and heading test method. 5) It is considered to be helpful for the safety of ship handling to draw curves of new course distances by turning circle test and $\phi_4$ - $\phi_2 by heading test, and utilize them at sea.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.6
• /
• pp.20-29
• /
• 2003

When Arctic offshore development in the 1970's first led to the consideration of ice capable tankers, there was a high level of uncertainty over design requirements for both safety and ship performance. Also here was a lack of reliable methods to evaluate design proposals. Since that time, improved understanding of the ice environment has raised the confidence of design specifications. Parallel developments have resulted in a suite of engineering tools for ship performance evaluation at the design stage Recent development of offshore and near shore oil and gas reserves in several countries together with economic studies of increased transportation through the Russian Arctic has newly introduced the interest in ice capable tanker design. in response, Samsung Heavy Industries (SHI) applied its experience in tanker design and construction to the design of a specialized tanker with ice capability. SHI produced two prototype hull designs for further study. The performance of both hulls and of the propellers was evaluated at the Institute for Marine Dynamics (IMD) in St. John's, Newfoundland This paper discusses the development of the design, describes the model experiments to determine performance and variations, and presents the results.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.3
• /
• pp.429-438
• /
• 2021

The mandatory installation of the ECDIS (Electronic Chart Display and Information System) became an important navigational equipment for navigation officer. In addition, ECDIS is a key component of the ship's digitalization in conjunction with various navigational equipment. Meanwhile, cyber-attacks emerge as a new threat along with digitalization. Damage caused by cyber-attacks is also reported in the shipping sector, and IMO recommends that cybersecurity guidelines be developed and included in International Security Management (ISM). This study analyzed the cybersecurity hazards of ECDIS, where various navigational equipment are connected. To this end, Importance-Performance Analysis (IPA) was conducted on navigation officer using ECDIS. As a result, the development of technologies for cyber-attack detection and prevention should be priority. In addition, policies related to 'Hardware and Software upgrade', 'network access control', and 'data backup and recovery' were analyzed as contents to be maintained. This paper is significant in deriving risk factors from the perspective of ECDIS users and analyzing their priorities, and it is necessary to analyze various cyber-attacks that may occur on ships in the future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.5
• /
• pp.557-565
• /
• 2021

Path-following control is considered as one of the most fundamental skills to realize autonomous navigation of marine vessels in the ocean. This study addresses with the path-following control for a ship in which there are environmental disturbances in the directions of the surge, sway, and yaw motions. The guiding principle and back-stepping method was utilized to solve the ship's tracking problem on the reference path generated by a virtual ship. For path-following control, error dynamics is one of the most important skills, and it extends to the research fields of automatic collision avoidance and automatic berthing control. The algorithms for the guiding principles and error variables have been verified by numerical simulation. As a result, most error variables converged to zero values with the controller except for the yaw angle error. One of the most interesting results is that the tracking errors of path-following control between two ships are smaller than the existing safe passing distances considering interaction forces from near passing ships. Moreover, a trade-off between tracking performance and the ship's safety should be considered for determining the proper control parameters to prevent the destructive failure of actuators such as propellers, fins, and rudders during the path-following of marine vessels.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.827-834
• /
• 2022

Recently, marine surveys using unmanned ships are attracting attention, and research on small unmanned ships using sails is on the rise. Sail drones can be used for marine surveys, monitoring, and pollution management. Therefore, in this study, using the method of estimating the ship speed for twin sail drones, the optimal conditions for sailing are checked, and the performance to be considered in the initial design stage, such as the motion performance and resistance of the sail drone. Consequently, the twin sail drone had a speed lower than 2.0 m/s, and the stability satisfied the rule by DNV. In addition, the maximum speed at an angle of attack of 20° at TWA 100° was 1.69 m/s and that at an angle of attack of 25° at TWA 100° was 1.74 m/s.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.53-58
• /
• 2005

An international study on Class B AIS for Non-SOLAS vessels is in progress through IMO and IEC. The IEC issued CDV(Committee Draft for Vote) on March 3, 2005, as IEC 62287, which includes operational and performance requirements, methods of test and required test results about Class B AIS. In this paper, we proposed the method of making Class B AIS properly onboard. This research deals with the problems of introducing Class B AIS which is properly applicable on small fishing vessels as well as domestic Non-SOLAS vessels. Moreover, several technical considerations were suggested to develop a national technical standards for Class B AIS.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.4
• /
• pp.340-349
• /
• 2019

In the case of a fire accident on a ship or an offshore plant, the design of the bulkhead penetration piece must be verified via a fire test procedure (FTP), as specified by the Maritime Safety Committee (MSC). The purpose of this study is to verify both the numerical analysis results and the design specifications for penetration pieces that could be applied to the A60 class bulkhead division. In this study, the FTP was carried out in accordance with the test procedure prescribed in the MSC regulation. In order to review the fire resistance performance according to the material type, bulkhead penetration pieces for the FTP were made from brass, carbon steel for machine structures (S45C), and austenite stainless steel (SUS316). In addition, spray-type insulation and mechanical fastener-type insulation were applied to investigate the fire resistance performance according to the type of insulation. To verify the heat transfer numerical analysis results for the A60 class bulkhead penetrating piece from this test study, the design specifications of the penetrating piece material and the insulation type applicable to a ship and an offshore plant were identified.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.2
• /
• pp.200-207
• /
• 2017

The purpose in having a control surface on ships is to control the motion of the ship. The control surface may be composed entirely of a single movable surface or of a combination of fixed and movable portions. A control surface has one sole function to perform in meeting its purpose, and that is to develop a control force in consequence of its orientation and movement relative to the water. The forces and moments generated as a result of this rotation and angle of attack then determine the manoeuvring characteristics of the ship. In this paper, two-dimensional flow characteristics of a flapped rudder and a water-blowing control rudder were accomplished respectively by PIV method in a circulating water channel. Model test has been carried out with different angles of attack of main foil (NACA 0012) and flap's deflection angles to predict the performance of the flapped rudder and the water-blowing control rudder. The 2-frame particle tracking method has been used to obtain the velocity distribution in the flow field. $Re{\fallingdotseq}3.0{\times}10^4$ has been used during the whole experiments and measured results have been compared with each other.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.10 no.2 s.21
• /
• pp.1-6
• /
• 2004

For many years, fatigue was discounted as a potential cause of or contributor to human error. However, resent accident data and research point to fatigue as a cause of and/or contributor to human error precisely because of its impact on performance. The goal of this study is to analyze and examine of the fatigue factors related to human error. In this study, we carried out the questionnaire sw-vey which concerned with the fatigue factors.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.5
• /
• pp.519-526
• /
• 2018

In this study, an algorithm to predict evacuation routes in support of shipboard lifesaving activities is presented. As the first step of algorithm development, the feasibility and necessity of an evacuation route prediction algorithm are shown numerically. The proposed algorithm can be explained in brief as follows. This system continuously obtains and analyzes passenger movement data from the ship's monitoring system during non-disaster conditions. In case of a disaster, evacuation route prediction information is derived using the previously acquired data and a prediction tool, with the results provided to rescuers to minimize casualties. In this study, evacuation-related data obtained through fire evacuation trials was filtered and analyzed using a statistical method. In a simulation using the conventional evacuation prediction tool, it was found that reliable prediction results were obtained only in the SN1 trial because of the conceptual and structural nature of the tool itself. In order to verify the validity of the algorithm proposed in this study, an industrial engineering tool was adapted for evacuation characteristics prediction. When the proposed algorithm was implemented, the predicted values for average evacuation time and route were very similar to the measured values with error ranges of 0.6-6.9 % and 0.6-3.6 %, respectively. In the future, development of a high-performance evacuation route prediction algorithm is planned based on shipboard data monitoring and analysis.