• Journal of Korean Dental Science
• /
• v.6 no.1
• /
• pp.13-21
• /
• 2013

Purpose: To report the successful results of using chin bone graft and autogenous tooth bone graft material (AutoBT) in alveolar cleft patients. Materials and Methods: Five patients with alveolar cleft defects underwent alveolar bone grafting. Three patients were treated using chin bone graft, and the other two patients underwent AutoBT graft. After implant site development using chin bone graft in the fi rst three cases, endosseous implant restorations were placed. In case #4 and 5, AutoBT graft material was placed to guide the normal eruption of partially impacted maxillary right canine and to the upper docking site after distraction osteogenesis. Result: Successful implant restorations with closure of the oronasal fistula were achieved in alveolar cleft defect reconstruction using either chin bone graft (Case #1, 2, 3) or AutoBT graft material (Case #4, 5). Case #4 showed enlarged follicle of the right maxillary canine, indicating a normal eruption guide pattern. Conclusion: Both chin bone graft and AutoBT graft showed favorable outcomes in reconstructing alveolar cleft defects. Autogenous tooth bone graft opens up the possibility of avoiding harvesting autogenous bone graft with complications and morbidities.

• The Korean Journal of Ceramics
• /
• v.7 no.1
• /
• pp.20-25
• /
• 2001

PbTiO$_3$ thin films were prepared by low-pressure thermal plasma deposition on (100)Pt/(100)MgO substrates. Mist of source material in which metal alkoxides are dissolved in 2-methoxyethanol was introduced into plasma through heating furnace and deposited onto substrates at $600^{\circ}C$. As-deposited PbTiO$_3$/Pt/MgO thin film prepared at 1.33$\times$10$^4$ Pa was grown epitaxially, but was consisted of many rectangular shaped grains, with many grain boundaries and it was impossible to measure electric properties. As-deposited film prepared at 1.00$\times$10$^4$ Pa showed weak peaks of X-ray diffraction and the film was not grown epitaxially. On the other hand, the film after annealed at $700^{\circ}C$ showed strong diffraction peaks and epitaxial growth was also observed. For annealed film, moreover, no clear grain boundaries were observed. The value of ${\varepsilon}_r$, tan${\delta}$, Pr and Ec of annealed film were 160, 3.2%, 10.4${\mu}$C.cm$^-2$ and 51.2kV.cm$^-1$, respectively. Since the composition, Pb/Ti, measured by EDS attaching to SEM changed point by point, the distribution of composition in annealed film was investigated and found out several relations between composition and electric properties. At stoichiometric composition, Pr and Ec showed the lowest value and they gradually became large as composition deviated from stoichiometric one. Moreover, the value of ${\varepsilon}_r$ became gradually large as the ratio of Ti became high.

• Korean Journal Plant Pathology
• /
• v.2 no.2
• /
• pp.82-88
• /
• 1986

Five antifungal substances were isolated from the long-term storaged extract of common purslane, and identified as isobutyric, butyric, isovaleric, valerie and caproic acids belonging to short-chain fatty acids (C4­C6). Each of these fatty acids showed more or less antifungal potency against spore germination and mycelial growth of Alternaria alternata Japanese pear pathotype in vitro. Antifungal potency of each fatty acid against spore germination was greater than that against the mycelial growth. No one of these fatty acids completely inhibited the mycelial growth at concentration lower than 200 ppm, while 50 ppm of caproic acid and 200 ppm of valerie acid completely inhibited the spore germination. The results of bioassay also suggested that chain-length of the fatty acids might be related with the antifungal potency, since fatty acids with longer chain showed higher antifungal potency.

• Journal of Biosystems Engineering
• /
• v.36 no.5
• /
• pp.369-376
• /
• 2011

The overall goal of this study was to examine the feasibility of predicting firmness of pear fruit by analyzing laser-induced light backscattering images. Thirty-five image analysis characteristics extracted from the laser-induced light backscattering images were used to build partial least squares regression (PLSR) models for predicting firmness of pear fruit. Experiments were conducted with three sets of pear samples which were in same "Shingo" cultivar, harvested in a same season, but produced in different counties. In every experiments with fruit samples produced in a same county, the correlation coefficients of prediction ($r_p$) and root mean square errors of prediction (RMSEP) of the models were 0.550~0.761 and 4.039~6.154 N, respectively. In an experiment with mixed fruit samples produced in different counties, the $r_p$ and RMSEP of the model were 0.669 and 5.02 N, respectively. The experiment results indicate that the analysis of laser-induced light backscattering images could be a useful tool for predicting firmness of pear fruit nondestructively.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.1
• /
• pp.461-465
• /
• 2014

Background: Antiemetic triplet therapy including dexamethasone (DEX) is widely used for patients receiving highly emetogenic chemotherapy (HEC). In Japan, the appropriate dose of DEX has not been established for this combination. Materials and Methods: To assess the efficacy and safety of increased-dose DEX, we retrospectively examined patients receiving HEC with antiemetic triplet therapy. Results: Twenty-four patients (fosaprepitant group) were given an increased-dose of DEX (average total dose: 45.8mg), fosaprepitant, and 5-HT3 antagonist. A lower-dose of DEX (33.6mg), oral aprepitant, and 5-HT3 antagonist were administered to the other 48 patients (aprepitant group). The vomiting control rates in the fosaprepitant and aprepitant groups were 100% and 85.4% in the acute phase, and were 75.0% and 64.6% in the delayed phase. The incidences of toxicity were similar comparing the two groups. Conclusions: Triplet therapy using an increased-dose of DEX is suggested to be safe and effective for patients receiving HEC.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.25-25
• /
• 2018

The Fukushima Daiichi Nuclear Power Plant accident in March 2011 caused severe radioactive contamination in the surrounding environment. Since the accident, much attention has been paid to the biological and genetic consequences of organism inhabiting the contaminated area. The effect of radiation exposure on genetic mutation rates is little known, especially for low doses and in situ conditions. Evaluating DNA mutation by low levels of radiation dose is difficult due to the rare mutation event and lack of sequence information before the accident. In this study, correlations with air dose levels and somatic DNA mutation rates were evaluated using Next Generation Sequencer for the clonal plant, Phyllostachys edulis. This bamboo is known to spread an identical clone throughout Japan, and it has the advantage that we can compare genetic mutation rate among identical clone growing different air dose levels. We collected 94 samples of P. edulis from 14 sites with air dose rates from $0.04{\sim}7.80{\mu}Gy/h$. Their clonal identity was confirmed by analysis using 24 microsatellite markers, and then, sequences among samples were compared by MIG sequence. The sequence data were obtained from 2,718 loci. About ~200,000 bp sequence (80 bp X 2,718 loci) were obtained for each sample, and this corresponds to about 0.01% of the genome sequence of P. edulis. In these sequences, 442 loci showed polymorphism patterns including recent origin mutation, old mutation, and sequence errors. The number of mutations per sample ranged from 0 to 13, and did not correlate with air dose levels. This result indicated that DNA mutations have not accumulated in P. edulis living in the air doses levels less than $10{\mu}Gy/h$. Our study also suggests that mutation rates can be assessed by selecting an appropriate experimental approach and analyzing with next generation sequencer.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.2
• /
• pp.707-712
• /
• 2015

Background: To evaluate use of magnetic resonance imaging (MRI) and a logistic model including risk factors for lymph node metastasis for improved diagnosis. Materials and Methods: The subjects were 176 patients with rectal cancer who underwent preoperative MRI. The longest lymph node diameter was measured and a cut-off value for positive lymph node metastasis was established based on a receiver operating characteristic (ROC) curve. A logistic model was constructed based on MRI findings and risk factors for lymph node metastasis extracted from logistic-regression analysis. The diagnostic capabilities of MRI alone and those of the logistic model were compared using the area under the curve (AUC) of the ROC curve. Results: The cut-off value was a diameter of 5.47 mm. Diagnosis using MRI had an accuracy of 65.9%, sensitivity 73.5%, specificity 61.3%, positive predictive value (PPV) 62.9%, and negative predictive value (NPV) 72.2% [AUC: 0.6739 (95%CI: 0.6016-0.7388)]. Age (<59) (p=0.0163), pT (T3+T4) (p=0.0001), and BMI (<23.5) (p=0.0003) were extracted as independent risk factors for lymph node metastasis. Diagnosis using MRI with the logistic model had an accuracy of 75.0%, sensitivity 72.3%, specificity 77.4%, PPV 74.1%, and NPV 75.8% [AUC: 0.7853 (95%CI: 0.7098-0.8454)], showing a significantly improved diagnostic capacity using the logistic model (p=0.0002). Conclusions: A logistic model including risk factors for lymph node metastasis can improve the accuracy of MRI diagnosis of rectal cancer.

• The Korean Journal of Ceramics
• /
• v.5 no.4
• /
• pp.379-385
• /
• 1999

Minute boehmite crystals with high aspect rations, which were hydrothermally synthesized from gibbsite in $Ba(OH)_2$ solution, occluded Ba with the Ba/Al molar ratio of about 0.03 in their interlayers. Their surface areas were about 14$\m^2$/g. The Ba-intercalated bohemite samples were partly used for producing $BaAl_{12}O){19}$ with low sinterability by externally supplementing $Ba(OH)_2$, and for forming transient aluminas. The surface area of $BaAl_{12}O){19}$ obtained by firing at $1500^{\circ}C$ for 3 h was 5.3$\m^2$/g, which was significantly lower than 12$\m^2$/g of the sol-gel origin. While a mixture ${\gamma}$-alumina and BaO is known to from $BaAl_{12}O){19}$ at $1200^{\circ}C$, solid state reaction between η-alumina transformed from the Ba-intercalated boehmite and BaO formed from $Ba(OH)_2$ deposited on the boehmite started above $1300^{\circ}C$. This suggests that large sized $Ba^{2+}$ ion occluded in η-alumina considerably suppresses the diffusion of $Al^{3+}$ ion. The surface area of the Ba-intercalated boehmite fired at $1400^{\circ}C$ for 3h was as high as 14$\m^2$/g indicative of its potential applicability to combustion catalysts. But it was decreased to 5.0$\m^2$/g after firing at $1500^{\circ}C$ for 3 h, accompanied by abrupt formations of $\alpha$-alumina and $BaAl_{12}O){19}$ as main products. The suppression of $\alpha$-alumina formation up to $1400^{\circ}C$ also suggests the significant blocking effect of $Ba^{2+}$ ion on the diffusion of the component ions.

• Journal of Sensor Science and Technology
• /
• v.23 no.3
• /
• pp.197-201
• /
• 2014

TEPC (Tissue Equivalent Proportional Counter) was usually used for high LET radiation dosimetry. We developed a prototype TEPC for micro-dosimetry in the range of $0.2{\sim}300 keV/{\mu}m$. And, the simulated site diameter of the TEPC is $2{\mu}m$, of similar size to a cell nucleus. For purposes of characterization the response for high LET radiation of the TEPC has been investigated under 135MeV/u Carbon ions in HIMAC (Heavy Ion Medical Accelerator). We determined the gas multiplication factor and measured the lineal energy spectrum [yd(y)] of 135 MeV/u Carbon ions. The value of the gas multiplication factor was 315 at 700 V bias voltage. As a result of the experiment, we could more understand the performance of the TEPC for high LET (Linear Energy Transfer) radiation. And the procedure of high LET radiation dosimetry using TEPC is established.

• Food Science and Preservation
• /
• v.5 no.4
• /
• pp.335-338
• /
• 1998

Weight loss of fear packed with corrugated paperboard box(FC) laminated with functional MA film after 60 days storage at 5$^{\circ}C$ was 1.0%, and that of LDPE, CE film was 0.6-0.7%, while that of control(Corrugated Paperboard box) was 2.8%. Total ascorbic acid content of pear ill MA films and FC package was higher than that of control. Titratable acid of control changed 37%, but that of the others packages changed below 27%. Soluble solid content of control changed 27%, while the others changed below 2%. Reference in overall appearence of pear were not found among packaging methods. Corrugated paperboard box(FC) laminated with Functional MA film can be used as packaging material for pear packaging.