• 한국어업기술학회:학술대회논문집
• /
• 한국어업기술학회 2002년도 추계 수산관련학회 공동학술대회발표요지집
• /
• pp.224-225
• /
• 2002

환경오염원의 단기독성 생물검정 시험 결과로부터 중장기적인 생리적 저해영향을 파악하는 것은 검정해야 할 중요한 과제의 하나다. 효율성 때문에 단기독성시험을 위주로 하지만, 재생산에 관련되는 중ㆍ장기적 피해를 예측하는 것은 지난한 일이다. Tabata(1979)는 수산생물에 대한 각종 수질오염물질의 반수치사농도와 난부화에 미치는 장기영향한계농도와의 관계를 개관하여 단기와 장기간에 0.1∼0.001의 적용계수를 제시한바 있다. (중략)

• 한국어업기술학회:학술대회논문집
• /
• 한국어업기술학회 2002년도 추계 수산관련학회 공동학술대회발표요지집
• /
• pp.226-227
• /
• 2002

환경오염원의 단기독성 생물검정 시험 결과로부터 중장기적인 생리적 저해영향을 파악하는 것은 검정해야 할 중요한 과제의 하나다. 효율성 때문에 단기독성시험을 위주로 하지만, 재생산에 관련되는 중ㆍ장기적 피해를 예측하는 것은 지난한 일이다. Tabata(1979)는 수산생물에 대한 각종 수질오염물질의 반수치사농도와 장기영향한계농도와의 관계를 개관하여 단기와 장기간에 0.1∼0.001의 적용계수를 제시한바 있다. (중략)

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.217-219
• /
• 1998

The need to accommodate much complex algorithm. high communication functionality and easier user interface lays heavy burden on the software developer of the protection relay these days. Using lightweight real-time kernel like uC/OS, the software development process can have much structural and easier feature. And total cost needed to development and maintenance of the software also can be reduced by development based on these real-time kernels.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.349-349
• /
• 2006

Vinyl-polynorbornene has good thermal stability, high transparency and low dielectric constant. However, it has low solubility, poor mechanical and adhesive properties. In this work, polynorbornene derivatives were prepared by Pd(II) late transition metal catalyst. The polymers have good solubility, and are thermally stable up to$300^{\circ}C$ The glass transition temperature is decreased as the side-chain becomes bulkier. Structure-property relationship of polynorbornene derivatives measured by X-ray scattering, mechanical and electrical properties will be discussed.

• 한국재료학회지
• /
• 제12권11호
• /
• pp.850-855
• /
• 2002

Silica powders were prepared from $SiCl_4$-$H_2$O system by chemical vapor deposition process, and investigated on size control of the products with reaction conditions. The products were amorphous and nearly spherical particles with 130nm~50nm in size. The size distribution became narrow with the increase of [$H_2$O]/[SiCl$_4$] concentration ratio. The particle size decreased with the increase of reaction temperature, [$H_2$O]/[SiCl$_4$] concentration ratio and total flow rate. The specific surface area measured by BET method was about three times larger than that of electron microscope method.

• Journal of Mechanical Science and Technology
• /
• 제20권9호
• /
• pp.1355-1360
• /
• 2006

This paper presents the dynamic stability of a cantilevered Timoshenko beam with a concentrated mass, partially attached to elastic foundations, and subjected to a follower force. Governing equations are derived from the extended Hamilton's principle, and FEM is applied to solve the discretized equation. The influence of some parameters such as the elastic foundation parameter, the positions of partial elastic foundations, shear deformations, the rotary inertia of the beam, and the mass and the rotary inertia of the concentrated mass on the critical flutter load is investigated. Finally, the optimal attachment ratio of partial elastic foundation that maximizes the critical flutter load is presented.

• 간호행정학회지
• /
• 제13권4호
• /
• pp.445-454
• /
• 2007

Purpose: This study was to explore the empowerment experienced by hospital nurses. Methods: Focus group was used to gather data and open coding method suggested by Strauss and Corbin was used to analyze the data. Thirty-four nurses who have clinical experience of more than three years at three university hospitals were participated in this study. Results: Five categories were identified: Getting chances of opportunities to show personal capabilities and motivations, acknowledgement, support, recognition and delightfulness. The major sources of empowerment were the acknowledgement of patients and family, colleagues, supervisors. doctors, and other personnels in hospital. Conclusion: Focus groups could be an useful tool for empowerment research in nursing. Further research will be needed to clarify the relationship among individual, group and organization.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1330-1332
• /
• 2007

We have newly developed transflective LCDs with a specific sub-pixel and the single cell gap structure. In our structure, the overall transmittance and reflectance has become higher than typical transflective LCDs. Furthermore, it can simplify the fabrication process of the transflective LCDs.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.352-357
• /
• 2004

In this study. the effects of combined environmental factors on mechanical and thermal analysis properties of graphite/epoxy composites were evaluated through a 2.5KW accelerated environmental aging tester. Environmental factors such as temperature. moisture, and ultraviolet were considered. A xenon-arc lamp was utilized for ultraviolet light. and exposure times of up to 3000 hours were applied. Several types of specimens - tensile, bending, and shear specimens those are warp direction and fill direction were used to investigate the effects of environmental factors on mechanical properties of the composites. The glass fabric $\sharp$650/AP300 was used for the fabrication of specimens. Mechanical degradations for tensile, bending and shear properties were evaluated through a UTM. Also. storage shear modulus. loss shear modulus, and tan $\delta$ were measured as a function of exposure times through a dynamic mechanical analyzer. Finally exposed surfaces of the composites were examined using II scanning electron microscope.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.185-188
• /
• 2004

Regarding some of the components of the Korean Tilting Train eXpress(TTX), the lightweight-vehicle development was mainly focused to this study, and so as using the materials, the existing material, steel or aluminum carbody was changed to the composite carbody with both design and manufacturing methods. Therefore the evaluation of the performance of joint strength between composite and metallic boundary area, especially the under frame and the carbody was required, and the compressive and the bending tests were conducted as the sub-scale specimen. In this evaluation, there was involved the sufficient strengths at the joint area between the underframe and the carbody, and is resulted as the increment of the safety factor through the observation of failure conditions.