• 한국자동차공학회논문집
• /
• 제8권3호
• /
• pp.85-97
• /
• 2000

In this paper, static and dynamic shift control stategies of CVT speed ratio are suggested. For the static shift control, in order to operate engine on the optimal operating region, a fuzzy control logic is used. In the fuzzy logic, S- factor that is defined as a degree of sportiness is introduced. Simulation results show that the static shift control strategy based on the fuzzy logic selects the optimal operating point automatically between the economy and the sporty mode corresponding to the driver's desire and the driving condition. For the dynamic shift control strategy, a shift speed map is suggested which determines the shift sped as fast or slow based on Δi, the difference between the desired speed ratio id and the actual speed ratio i, and throttle opening. It is seen from the simulation results that the CVT shift speed is determined by the dynamic shift control strategy to provide appropriate performance and comfort for the driver's demand and driving condition. Additionally, experiments are performed to investigate the dynamic performance of the shift speed for the lift foot up. From the experimental results, it is found that improved shift feeling can be obtained by the dynamic shift control strategy when lift foot up occurs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.146-150
• /
• 1989

In the pole assignment strategy, the closed loop poles are placed at prespecified locations. The amount of control effort required is to some extent proportional to the distance of the proposed closed loop locations of the poles from their open loop locations. The poor choice of closed loop locations may result in Large control effort and it may nuke the system unstable. To overcome this problem, pole shift control strategy is described in this paper. The validity of the proposed control strategy is assured through some simulations.

• 한국환경보건학회지
• /
• 제37권1호
• /
• pp.73-79
• /
• 2011

The growing interest in nanotechnology has resulted in increasing concern and a number of published environmental and workplace measurements for assessing occupational exposure to engineered nanomaterials. However, the amount of previous exposure data remains limited. Furthermore the data available was collected with extensive variation in terms of exposure measurement strategy, which limits the ability to pool the data in the future. In response, this paper reviewed several pertinent issues related to exposure measurement strategy to suggest a harmonized measurement strategy which would make exposure data more useful in the future, e.g. correlation between exposure metrics, relationship between activity and exposure, task-based or shift-based assessment, background concentration, limitation of personal exposure monitoring and other determinants of exposure/modeling. An improved sampling strategy for nanomaterial exposure assessment should be considered in order to maximize the use of the data from various real time monitoring instruments.

• Journal of Mechanical Science and Technology
• /
• 제14권5호
• /
• pp.499-507
• /
• 2000

Smooth shift is one of the key issues in automatic power transmission control systems. However, the torque sensors are too expensive to be used in shift controllers on production vehicles. In order to provide a basic strategy for smooth shifting by using RPM sensors only and in order to accomplish the shift within a designated time, this paper studies detailed characteristics of the smooth shift for clutch-to-clutch shift mechanism. A desired trajectory of slip speed is proposed for smooth acceleration shift defined in this paper. Also the clutch torque needed to achieve this trajectory is derived, and it may be used as a open loop shift control law.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권2호
• /
• pp.145-149
• /
• 1995

Validity of use of a Y-maze for determining a foraging strategy of cattle was investigated with the object of establishing a procedure of testing foraging strategies of large herbivores. Cattle were placed in a start box of a Y-maze, forced into either goal arm and allowed to consume half of the feed at the end of the arm. Then, cattle were returned to the start box and allowed to choose either arm in the second half of a trial. This time animals were allowed to deplete the feed in the goal arm they chose. A return to the previous arm was recorded a "stay" Choice of the other arm was recorded as a "shift". Shift strategy was not observed. Rather, their behavior appeared either random or stay. However, it might have been caused by inappropriateness of the application of the apparatus and/or the procedure used in the study of foraging behavior of rats. Although the existence of lateral preference was suggested, further study with an elaborated procedure will be necessary to investigate foraging strategies of cattle.

• 지능정보연구
• /
• 제21권2호
• /
• pp.151-171
• /
• 2015

본 연구는 최근 가장 큰 이슈로 떠오르는 "사물인터넷(IoT: Internet of Things)"의 개념과 국내 외 IoT 시장에 대한 현황을 고찰하였으며, IoT 시대의 도래로 인해 유발되는 패러다임 전환 발생에 따른 기업측면의 적절한 대응방안에 대한 해결책을 도출하였다. 따라서 본 연구는 티핑포인트(Tipping point)에 있는 IoT 경쟁 시대에 적절하게 대응하기 위한 기업의 경영전략을 '패러다임 전환(paradigm shift)'이라는 시각을 통해 대응 방안을 제시하였다. 특히, 과거의 경영 패러다임과 IoT 시대의 경영 패러다임을 비교 분석하여 i)지식 및 학습 주도 경영, ii)기술 및 혁신 중심 경영, iii)수요 창출 경영, iv)글로벌 협업 경영으로 새롭게 패러다임 전환(Paradigm Shift)이 발생할 것으로 예측 및 제안하였고, 이러한 패러다임의 전환에 대응하기 위한 기업측면의 경영전략 프로세스 모델을 구축하기 위해 Gartner가 제시한 'RTE Cyclone model'을 활용하였다. '실시간 기업(RTE)' 이라는 개념은 급변하는 IoT 시대에 기업측면의 경영 전략 프로세스로 활용가치가 있다고 판단되며, 본 연구에서 적절히 응용하여 'IoT-RTE Cyclone model'을 제안하였다. 특히, 제안한 모델은 기업의 민첩성을 강조하고 IT 및 IoT 기술을 통한 실시간 모니터링, 분석, 실행을 기본으로 하며, 기업의 경영 프로세스 각 부문을 통합시켜 기업의 전반적인 서비스를 지원하기 때문에 빠르게 변화하는 IoT 시대에서 영위하는 기업측면에서의 효과적인 대응전략으로 활용할 수 있다.

• Journal of Mechanical Science and Technology
• /
• 제15권12호
• /
• pp.1623-1629
• /
• 2001

This parer presents a CVT line pressure control strategy for the increased shift speed. Firstly, an algorithm to increase the CVT shift speed is suggested based on a modified CVT shift dynamics and shift speed maps are constructed. In addition, simplified dynamic models of the line pressure and the ratio control valve are derived by considering the CVT shift dynamics, and low level control algorithms for the ratio and the line pressure control are proposed. Using the shift speed maps and the simplified dynamic models of the CVT system, shift performance is investigated. It is found from the experimental and simulation results that improved shift speed can be achieved by increasing the lilly pressure.

• Journal of Power Electronics
• /
• 제12권4호
• /
• pp.664-676
• /
• 2012

A phase shift algorithm based on the closed-loop control of dc-link voltage implemented on a series active voltage quality regulator (AVQR) is proposed in this paper. To avoid pumping-up the dc-link voltage, a general phase shift compensation strategy is applied. The relationships among the operation variables are discussed in detail, which is very important for guiding the design of both the main circuit and the control system. Then on the basis of an investigation of the dc-link voltage pumping-up from viewpoint of the active power flow, a novel phase shift control method based on the closed-loop of the dc-link voltage is proposed. This method can adjust the phase of the output voltage gradually and automatically according to the dc-link voltage variation without introducing a phase jump. The effectiveness of the proposed strategy is verified through simulations of a single-phase 5kVA prototype and laboratory experiments on both a single-phase 5kVA and a three-phase 15kVA prototype.

• 한국자동차공학회논문집
• /
• 제2권5호
• /
• pp.110-120
• /
• 1994

Due to the increasing demands in comfortable drivability, most motor companies are developing their own unique shift controller to suppress the shift shock induced by gear change. For a typical automatic transmission system, the dynamic constraints of friction clutch was clarified for efficient program development and major factors effecting the shift transient was confirmed by simulation study. The MIMO LQG/LTR controller was designed to control the turbine and corresponding gear speed. By establishing the control strategy recalling transient response during shift the speed controller mentioned above was used as an indirect torque controller. Consequently a new concept for a systematic design method of shift controller applicable to wide-varying systems was suggested which is time efficient and cost efficient saving a lot of experimental study.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.201-210
• /
• 2019

This paper proposes a multimode hybrid control strategy that can achieve zero-voltage switching of primary switches and zero-current switching of secondary rectifier diodes in a wide input voltage range for full-bridge LLC resonant converters. When the input voltage is lower than the rated voltage, the converter operates in Mode 1 through the variable-frequency control strategy. When the input voltage is higher than the rated voltage, the converter operates in Mode 2 through the VF and phase-shift control strategy until the switching frequency reaches the upper limit. Then, the converter operates in Mode 3 through the constant-frequency and phase-shift control strategy. The secondary-side diode current will operate in the discontinuous current mode in Modes 1 and 3, whereas it will operate in the boundary current mode in Mode 2. The current RMS value and conduction loss can be reduced in Mode 2. A detailed theoretical analysis of the operation principle, the voltage gain characteristics, and the realization method is presented in this paper. Finally, a 500 W prototype with 100-200 V input voltage and 40 V output voltage is built to verify the feasibility of the multimode hybrid control strategy.