• Wind and Structures
• /
• v.27 no.5
• /
• pp.347-356
• /
• 2018

In this paper, stress distribution for a structurally stable greenhouse is considered in the present paper with subsequent investigation into the detailed stress distribution contour with the variation of self-weight and wind pressure level designation method under wind velocity of less than 30 m/sec. For reliable analysis, wind pressure coefficients of a single greenhouse unit were modeled and compared with experiment with correlation coefficient greater than 0.99. Wind load level was designated twofold: direct mapping of fluid dynamic analysis and conversion of modeled results into wind pressure coefficients ($C_P$). Finally, design criteria of EN1991-1-4 and NEN3859 were applied in terms of their wind pressure coefficients for comparison. $C_P$ of CFD result was low in the most of the modeled area but was high only in the first roof wind facing and the last lee facing areas. Besides, structural analysis results were similar in terms of stress distribution as per EN and direct mapping while NEN revealed higher level of stress for the last roof area. The maximum stress levels are arranged in decreasing order of mapping, EN, and NEN, generating 8% error observed between the EN and mapping results under 30 m/sec of wind velocity. On the other hand, effect of dead weight on the stress distribution was investigated via variation of high stress position with wind velocity, confirming shift of such position from the center to the forward head wind direction. The sensitivity of stress for wind velocity was less than 0.8% and negligible at wind velocity greater than 20 m/sec, thus eliminating self-weight effect.

• Cartoon and Animation Studies
• /
• s.30
• /
• pp.87-112
• /
• 2013

The effort to make the peaceful mood between South and North Korea that had started from so-called 'Sunshine Policy' of the People's Government since 1998, lasted until Rho Mu-hyun government. On the other hand, Lee Myung-bak government changed the policy toward North Korea to more practical and principle-oriented one than the previous two governments. By the shift of the policies, the industry of animation of South and North Korea has been influenced so much. The purpose of his study is to point out the crisis of the status of the animation industry of the Korean Peninsula through the change of the policies, and to propose one method of the new paradigm to the next government in order to build a turning point of South and North Korea animation exchange. First, the paradigms toward North Korea through the past governments are compared. Second, the result and situation of animation industry of South and North Korea are analyzed. Finally, by examining deducted problems, the forward policy toward North Korea and, by extension, the improvement direction and practical tasks of South and North Korea animation exchange policy are considered.

• Journal of Technology Innovation
• /
• v.29 no.4
• /
• pp.1-30
• /
• 2021

Due to the recent development of system semiconductors, technical innovation for the electric devices of the automobile industry is rapidly progressing. In particular, the electric device of automobiles is accelerating technology development competition among automobile parts makers, and the development cycle is also changing rapidly. Due to these changes, the importance of strategic planning for R&D is further strengthened. Due to the paradigm shift in the automobile industry, the Product-Technical Roadmap (P/TRM), one of the R&D strategies, analyzes technology forecasting, technology level evaluation, and technology acquisition method (Make/Collaborate/Buy) at the planning stage. The product-technical roadmap is a tool that identifies customer needs of products and technologies, selects technologies and sets development directions. However, most companies are developing the product-technical roadmap through a qualitative method that mainly relies on the technical papers, patent analysis, and expert Delphi method. In this study, empirical research was conducted through simulations that can supplement and strengthen the product-technical roadmap centered on the automobile industry by fusing Gartner's hype cycle, cumulative moving average-based data preprocessing, and deep learning (LSTM) time series analysis techniques. The empirical study presented in this paper can be used not only in the automobile industry but also in other manufacturing fields in general. In addition, from the corporate point of view, it is considered that it will become a foundation for moving forward as a leading company by providing products to the market in a timely manner through a more accurate product-technical roadmap, breaking away from the roadmap preparation method that has relied on qualitative methods.

• Quality Improvement in Health Care
• /
• v.5 no.2
• /
• pp.258-276
• /
• 1998

This study was conducted to justify the "prescribed shelf life" currently used in Samsung Medical Center and give recommendations based on scientific data to adopt for safe and cost-effective storage times for sterile goods Since the early 1970's, predetermined expiration dating policy has been used in Korea on all in-house sterilized products like any other countries; six months for the supplies wrapped in polyethylene peel pouches and two weeks for the rest. Recently, however, the studies suggest that current standards for preserving the sterility can be changing. It looks like we unnecessarily have too-short expiration date of sterilized supplies, that is far from being cost effective. Certainly, this research is an exciting project, especially in Korea, and will be leading and contributing to the paradigm shift of the conservative concept of shelf life for sterile supplies in Korean healthcare facilities. The major goal of this study was placed on the measurement of the recontamination time in packs wrapped in all kinds of wrapping materials used in S.M.C and stored in various conditions for periods ranging from three months to six months, and then develop a practical standard of "shelf life" based on the analyzed data. Objectives: To measure and compare the recontamination time of sterile packs among wrapppers and storage conditions, and develop a practical standard for the shelf life and storage conditions of sterile products. Samples and Method: The sterile integrity was investigated of the total 1,440 sterile sample packs containing gauze strip($1.5cm{\times}0.5cm$) we prepared and wrapped in nine wrapping materials (randomized reprocessed linens, linens reprocessed 99 times, linens reprocessed 120 times, new kraft paper, used kraft paper, new nonwoven fabrics, 6-time reprocessed nonwoven fabrics, new polyethylene peel pouches, used polyethylene peel pouches), and stored in four locations(closed cabinet of one of the typical wards, open shelf of one of ICUs, open shelf of separate storage room in ER, open shelf in OR), for three to six months, respectively in 1998. Each type of packs were opened weekly and the gauze strips inoculated into Brewer's thioglycollate broth at $35^{\circ}C$ for seven days. Results: There was no growth found for any types of the pack and storage conditions studied. Discussion: This study was conducted in an attempt to identify the possibility of extending the current shelf life for sterile goods we use in a sense of cost effectiveness. The findings suggest that we could extend our expiration dates, that means we can save a lot of materials and personnel time meeded for resterilizing, outdating, recleaning, wrapping, and reshelving. Then it will initiate a great reform in the field of healthcare in Korea, and now we are looking forward to this valuable revolution. We are going to continue this study and take all steps need to apply this new concept to our practice, and then trying to extend to other hospitals.

• Journal of Digital Convergence
• /
• v.15 no.2
• /
• pp.173-181
• /
• 2017

In this paper, we have studied tracking as a training stage of considering the position and the scale of a person given its previous position, scale, as well as next and forward image fraction. Unlike other learning methods, CNN is thereby learning combines both time and spatial features from the image for the two consecutive frames. We introduce multiple path ways in CNN to better fuse local and global information. A creative shift-variant CNN architecture is designed so as to alleviate the drift problem when the distracting objects are similar to the target in cluttered environment. Furthermore, we employ CNNs to estimate the scale through the accurate localization of some key points. These techniques are object-independent so that the proposed method can be applied to track other types of object. The capability of the tracker of handling complex situations is demonstrated in many testing sequences. The accuracy of the SVM classifier using the features learnt by the CNN is equivalent to the accuracy of the CNN. This fact confirms the importance of automatically optimized features. However, the computation time for the classification of a person using the convolutional neural network classifier is less than approximately 1/40 of the SVM computation time, regardless of the type of the used features.