• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.245-252
• /
• 1996

$\lambda$/4 phase-shifted DFB lasers with nonideal grating structure have been studied by using an effective-index transfer matrix method where material dispersion, vwaveguide dispersion and waveguide-structuredependent loss are taken into consideration. Nonideal grating structure in the center phase-shift region does not incur serous degradation of laser characteristics. Phase-shift error from the ideal shift of $\pi$ causes a decrease in the threshold gain difference and lasing wavelength shift and should be less than $\pi$/4 when residual facet reflectivity is 0.7%. also, positional error of the phase-shift should be less than 9% of the cavity length in order for the threshold gain difference to be decreased less than 10%.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.8
• /
• pp.20-29
• /
• 2011

This paper presents an improved phase-shift pulse-width modulation (PWM) full-bridge converter using a blocking capacitor. As the proposed converter reduces the circulation energy by inserting only one series blocking capacitor at the primary side of the conventional phase-shift PWM full-bridge converter structure, it improves the operation characteristics of the conventional converter. In this paper, first, the operation of conventional phase-shift PWM full-bridge converter is roughly reviewed, and then the operational principle of the proposed converter is classified and explained by each mode. After that, a prototype design example based on the operational principle is shown. Then, the improved operation characteristics of the proposed converter are actually verified through the experimental results.

• Korean Journal of Occupational Health Nursing
• /
• v.7 no.2
• /
• pp.155-163
• /
• 1998

In order to investigate the effects of rotating shift work on the subjective characteristics of sleep and mental depression questionnaire survey was carried out on 405 shift workers and 153 nonshift workers who were nurses employed. in three university hospital. The questionnaire forms used in this study were the self rating depression scale(SDS) and circadian type questionnaire(CTQ) factor R(rigidity/flexbility of sleeping habit) and factor V(inability/ability to overcome drowsiness). The results were as follows ; 1. Mean score of CTQ R in shift workers was significantly lower than that in nonshift workers, however, no significant difference in CTQ V was observed between two groups. 2. Mean score of SDS was significantly higher in shift workers(44.1) than in nonshift workers(39.8). 3. Mean self rating depression scale scores of pervasive affect, physiologic equivalents and psychological equivalents were significantly higher in shift workers than in nonshift workers. 4. In shift worker, mean SDS score was the highest in confusion and followed by diurnal variation, retardation, and indeciveness in the descending order. In nonshift worker, that score was the highest in decreased libido and followed by confusion, and indeciveness in the descending order. 5. Circadian type questionnaire scores was significantly and negatively correlated with significantly and negatively correlating with Self-rating depression scale scores(r=-0.473).

• Korean Journal of Applied Biomechanics
• /
• v.17 no.3
• /
• pp.225-232
• /
• 2007

This work intends to investigate the effects of shift characteristics on the propulsion performance of a manual wheelchair with an automatic transmission. A planetary gear train is employed to generate a two-stage shift automatically, based on the distance traveled from rest. Motion analysis has been performed for measuring kinematic properties of the arm and then the inverse dynamics has been applied for estimating joint forces/torques. Then, a parametric study has been performed to find a set of the shift ratios and the shift intervals for optimizing propulsion performance. Results show that the propulsion performance is closely related to the shift condition. It is found that a short shift interval is desirable for a short distance propulsion. However, an optimum shift interval for a long distance propulsion is inversely proportional to the shift ratio approximately. Consequently, the automatic transmission can greatly lower the joint loadings by the speed reduction, which eventually contribute to prevent joint injuries of wheelchair users.

• Journal of Korean Clinical Nursing Research
• /
• v.23 no.1
• /
• pp.54-63
• /
• 2017

Purpose: The purpose of this study was to compare the working status and Standard Shiftwork Index (SSI) between night shift-fixed nurses and rotating shift nurses. Methods: Participants were 367 nurses working as registered nurses at 7 different medical institutions. The data were collected from August 8, 2016 to September 30, 2016. Results: Night shift fixed nurses were more satisfied with work schedule than rotating shift nurses. Rotating shift nurses reported higher SSI scores, such as chronic fatigue, musculoskeletal problems, than night shift fixed nurses. In SSI's sub-items, rotating shift nurses reported higher scores, such as the amount of sleep, feeling well after sleep, heartburn or stomach-ache and heartbeat irregularities, than night shift fixed nurses. Conclusion: The results indicated that night shift fixed system might be an effective method to improve nurses' work satisfaction. It is necessary to figure out any suitable night shift fixed system based on the characteristics of each nursing organization. The SSI might be an useful tool to measure the nurses' satisfaction in reference to their work shift.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.674-679
• /
• 2002

As the object of this study, a transmission system with the style of HST in combination with mechanical semi-automatic transmission for application in hydraulic wheel excavators was chosen. The dynamic characteristics of the object transmission was studied by numerical analysis of the mathematical model. The results of numerical analysis showed comparatively good agreements with experimental results, so the validity of the numerical analysis process was ascertained.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.3
• /
• pp.118-126
• /
• 2010

The automated mechanical transmission(AMT) is composed of electronic control management(ECM) and automatic shift gear(ASG). The AMT has advantages which are high efficiency of manual transmissions(MT) and offer operation convenience similar to automatic transmissions(AT). However, it has defects that are the torque gap during gear shift transients and shift time is long. To reduce such defects, it is necessary practically to evaluate error and characteristics as developing simulation model before the control algorithm is applied. In this paper, models are composed of vehicle model and AMT shift control model. Particularly AMT shift control model consists of main clutch management model (MCM) and shift control management model(SCM). The developed models were verified by comparing the simulated and experimental results under the same operational conditions. It can also be used to evaluate shift algorithm.

• Journal of the Korean Society of Safety
• /
• v.37 no.5
• /
• pp.62-73
• /
• 2022

This study investigates the working conditions of shift workers according to age group by analyzing the sixth Korean Working Conditions Survey's data. A total of 1,323 shift workers were extracted from the dataset. Three age groups (A: 20s-30s, B: 40s-50s, C: 60s and above) were statistically compared in terms of health problems, emotional hazard exposure, work-life imbalance, and satisfaction with working conditions. Elderly shift workers (those in their 60s and above) had significantly more severe health problems and work-life imbalance, greater exposure to emotional hazards, and lower satisfaction with working conditions than young shift workers (those in their 20s-50s). The study's findings reveal the characteristics of working conditions for elderly shift workers and would be useful for improving shift workers' quality of life, as well as safety and productivity in the workplace.

• Geophysics and Geophysical Exploration
• /
• v.6 no.4
• /
• pp.199-206
• /
• 2003

Characteristics of the static shift are discussed by comparing the three-dimensional MT inversion with/without static shift parameterization. The galvanic distortion by small-scale shallow feature often leads severe distortion in inverted resistivity structures. The new inversion algorithm is applied to four numerical data sets contaminated by different amount of static shift. In real field data interpretations, we generally do not have any a-priori information about how much the data contains the static shift. In this study, we developed an algorithm for finding both Lagrangian multiplier for smoothness and the trade-off parameter for static shift, simultaneously in 3-D MT inversion. Applications of this inversion routine for the numerical data sets showed quite reasonable estimation of static shift parameters without any a-priori information. The inversion scheme is successfully applied to all the four data sets, even when the static shift does not obey the Gaussian distribution. Allowing the static shift parameters have non-zero degree of freedom to the inversion, we could get more accurate block resistivities as well as static shifts in the data. When inversion does not consider the static shift as inversion parameters (conventional MT inversion), the block resistivities on the surface are modified considerably to match possible static shift. The inhomogeneous blocks on the surface can generate the static shift at low frequencies. By those mechanisms, the conventional 3-D MT inversion can reconstruct the resistivity structures to some extent in the deeper parts even when moderate static shifts are in the data. As frequency increased, however, the galvanic distortion is not frequency independent any more, and thus the conventional inversion failed to fit the apparent resistivity and phase, especially when strong static shift is added. Even in such case, however, reasonable estimation of block resistivity as well as static shift parameters were obtained by 3-D MT inversion with static shift parameterization.

• Journal of the Ergonomics Society of Korea
• /
• v.22 no.3
• /
• pp.13-26
• /
• 2003

The purpose of this study is to investigate the present conditions of the night work and shift work systems in the heavy chemical industrial complexes found in Changwon, Masan, and Chinhae. Korea. We will attempt to define and classify their problems; and to discover further ways to improve their systems. Fifty production factories were carefully selected as the subjects for this study. The shift systems were classified into five categories. The consecutive night shifts were long in almost all cases with 6 days (36 factories) and 7 days (13 factories). It was found that the night work of about] 2 hours continues for a long period in the weekly rotation full-day shift systems and the night-including non-full-day shift systems, and there was no holiday during a shift cycle in the continuous full-day shift systems. The work time in most shift systems was longer than the 44-hours/week permitted by Korean law. Considering the characteristics of these various types of shift systems, the most essential thing to reduce the shift workers' work load may be to shorten their working hours and improve the schedule of shift systems. It is highly recommended as a fundamental solution. to reduce the portal-to-portal hours from 12 to 8 in the night-including non-full-day shift systems and the weekly rotation full-day shift systems, and at least to employ a 4-team 3-shift system in the continuous full-day shift systems. In addition to this, it should from now on be taken as a goal to restructure the types of shift systems by taking such measures as avoiding continuous night work if possible, providing sufficient off-duty intervals both before and after night shift, providing increased opportunities for workers to nap during night work. and increasing the number of holidays.