We reviewed previous studies on well-performing aquaculture facilities, rearing environment, breeding management and feed supply to find the optimal conditions of the abalone aquaculture in marine cage. The size of marine cage varied depending on local area where the abalone farms are located. The small size cage ($2.4{\times}2.4{\times}2.5$ m) was used in Wando, Jindo and Hanam area where much of the provincial's abalone production is conducted and the middle size cage ($2.4{\times}4.8{\times}2.5$ m) was used in Huksando area. Big size group, above 2 cm in shell length, was produced from the end of October to the middle of November and small size group, below 2 cm in shell length, was produced from the end of March to the beginning of April next year in case of juvenile abalone of land production. The initial stocking density was 517-1,653 individuals/culture square meter($m^2$) in case of the big size group. The optimal rearing density was 326 and 263 individuals/culture square meter ($m^2$) after 1 year and 2 year's rearing, respectively. It is shown that relationship between individual shell length (x) and rearing density (y) is estimated to be $y=2,803.1x^{-1.4641}$ ($r^2=0.9687$). In addition, The obvious relationship was indicated between number of cage (x) and sea weed production facilities (y) as y=1.1542x+10.832 ($r^2=0.918$) in Wando, because sea mustard (Undaria pinnatifida) or japanese tangle (Laminaria japonica) was supplied as a feed for abalone culture. The general pattern of relationship between shell length (x) and shell weight (y) of cultured abalone is estimated to be $y=0.1443x^{2.9461}$ ($r^2=0.9997$).
This paper develops a finite element model for studying the crashworthiness analysis of a mid-size truck. A simulation for a truck frontal crash to a rigid barrier using the model is performed with PAM-CRASH installed in super computer SP2. Full vehicle model is composed of 86467 shell elements, 165 beam elements and 98 bar elements, and 86769 nodes. The model uses four material model such as elastic, elastic-plastic(steel), rigid and elastic-plastic(rubber) material model which are in PAM-CRASH. Frame and suspension system are modeled with 28774 shell elements and 31412 nodes. Cab is modeled with 34680 shell elements and 57 beam elements, and 36254 nodes. Bumper is modeled with 2262 shell elements, and 2508 nodes. Axle, steering shaft, etc are modeled using beam or bar elements. Mounting parts are modeled using rigid bodies. Bodies are interconnected using nodal constrains or joint options. To verify the developed model, frontal crash test with 30mph velocity to a rigid barrier is carried out. In the crash test, vehicle pulse at lower part of b-pillar is measured, and deformed shapes of frame and driver seat area are photographed. Those measured vehicle pulse and photographed pictures are compared those from the simulation to verify the developed finite element model.
Kim, Hyun-Jung;Jeong, Young-Il;Kim, Sung-Ho;Lee, Young-Moo;Cho, Chong-Su
Archives of Pharmacal Research
/
제20권4호
/
pp.324-329
/
1997
AB-type amphiphilic copolymers (abbreviated as LE) composed of poly (L-leucine) (PLL) as the A component and poly (ethylene oxide) (PEO) as the B component were synthesized by the ring-opening polymerization of L-leucine N-carboxy-anhydride initiated by methoxy polyoxyethylene amine $(Me-PEO-NH_2)$ and characterized. Core-shell type nanoparticles were prepared by the diafiltration method. Particle size distribution obtained by dynamic light scattering was dependent on PLL composition and the size for LE-1, LE-2 and LE-3 was $369.6{\pm}267$, $523.4{\pm}410$ and $561.2{\pm}364 nm$, respectively. Shapes of the nanoparticies observed by transmission electron microscope (TEM) were almostly spherical. The critical micelle concentration (CMC) of the nanoparticles determined by a fluorescence probe technique was dependent on the composition of hydrophobic PLL, and the CMC for LE-1, LE-2 and LE-3 was $2.0{\times}10^{-6},1.7{\times}10^{-6}$ and $1.5{\times}10^{-6}(mol/l) $, respectively. Clonazepam release from core-shell type nanoparticles in vitro was dependent on PLL composition and drug loading content.
So far, for pearl culture using abalones, a plastic nucleus has been planted in an abalone by perforating the shell. But after planing 80 % of abalones died, and even if they live, the pearl's hardness was not so good. The weak hardness made the pearl valueless. The quality of a pearl is decided by the gloss and the quality of the pearl's layer. This study is to find the right nucleus for abalones and to decrease a death rate of abalones by selecting the right planting place. This study was also performed to obtain valuable pearls with proper size, gloss, and good color. Below is the result of the research; Conch shells out of the various nucleus materials were the best. Their shape, color and gloss were very good. The nucleus was planted in the part that a shell is grown up under the absorption ball, as a result a pearl sack was quickly made. After 15 days, out of every pearl, pearl sacks were made. The pearl formation was measured every month. From the abalone shell which was planted in April, qualitative pearls which was from 5mm to 5.81mm in size were obtained in December.
The purpose of this study was to develops of brassiere pattern for middle school students (15 ages ${\mp}$ 3). In order to design a brassiere pattern, the body surface shell was used as the basic pattern. The foundation pattern and the four-piece brassiere pattern with wire were designed and sewed. The results of this study can be summarized as follows. 1. The foundation pattern of the size 75A was proved proper for the body by the wearing tests. Each angle and length of the parts on the base line of the breasts played an important role on setting the pattern. 2. As based on the body surface shell extracted from a plaster mold, the cups of brassiere pattern were applied to the body surface shell, and full side stretch -wings were applied to 8% reduced body size. 3. As the result of the wearing test, the excellence of the experimental brassiere was recognized objectively, with high marks in all the items of clothing compensation, body motion, clothing pressure and breasts growth. The experimental brassiere was covering the whole breasts to cope with change according to breasts growth, It was designed to support the breasts firmly, not to press the middle part of them. Simultaneously, this has the advantages that satisfy a characteristic of a figure and the purpose of putting it on.
The larvae of Mytilus coruscus were grown at the room temperature of approximately 15.1C under several different sulture conditions, i.e., salinity, population of the larvae, density and kind of food organisms, etc. (1) The egg of Mytilus coruscus obtained in the laboratory measured about 73.0${\mu}$ in diameter. The embryos gradually developed into larvae up to 179.0${\mu}$ shell length with the shell height of 135.9${\mu}$ even in the absence of the algal food. Beyond this size, however, the growth of larvae was considerably retarded, indicating that the better growth could be expected if the food began to be fed four days after spawning. (2) The larvae began settling upon reaching 281.4${\mu}$ to 310.9${\mu}$ in shell length or 264.3${\mu}$ to 301.9${\mu}$ in shell height. When the shell length reaches 322.6${\mu}$ to 337.1${\mu}$, the shell height also reaches about the same, i.e., 321.5${\mu}$ to 346.2${\mu}$. (3) Daily rate of food consumption was determined by the size of the larvae and the species of the algal food. Regardless of the species of food given, the rage of food consumption remained almost the same until the larva reached the straight-hinge stage, and marked variations were found as the larvae grew larger. Daily rate of food consumption was shown as follow; Chaetoceros calcitrans : Y=2.99167e$\^$0.000018243x$\^$2// Cyclotella nana : Y=3.00324e$\^$0.000015481x$\^$2// Monochrysis lutheri : Y=3.000056e$\^$0.000014485$\^$2// (4) Suitable amount of the food to be given was about five times of the consumed food by Mytilus coruscus. (5) When the numbers of the larvae was higher than ten per milliliter, the growth was significantly retarded. (6) Monochrysis lutheri and Cyclotella nana were much better than Chaetoceros calcitrans as the food of Mytilus coruscus, and even the same food organism showed some difference with the age of the organism. (7) Sea water of higher salinity showed the better result in the growth of the larvae and the water with the specific gravity of 1.020 or below was dangerous for the larvae. (8) The mean growth of the larvae of Mytilus coruscus under lavorable condition was shown as follows: shell length 121.8${\mu}$ to 179.0${\mu}$ : Y=119.18+7.42X 196.7${\mu}$ to 322.6${\mu}$ : Y=203.144+7.687X 322.6${\mu}$ to 985.1${\mu}$ : Y=302.5978+11.8356X shell height 86.3${\mu}$ to 135.9${\mu}$ : Y=86.22+6.40X 158.1${\mu}$ to 321.5${\mu}$ : Y=162.998+10.027X 321.5${\mu}$ to 1,215.4${\mu}$ : Y=309.3701+16.258X Relationships between the shell length and shell height were shown as follows: shell length 121.8${\mu}$ to 179.0 : Y=0.83726X-15.79165 196.7${\mu}$ to 322.6 : Y=1.29909X-100.58610 322.6${\mu}$ to 985.1${\mu}$ : Y=1.3536X-101.6806
A Study on the Development of Brassiere Pattern for Elderly Women The purpose of this study is to develop functional and sensible brassiere for elderly women. For this purpose, 6 elderly women(aged between 65 and 69) were sampled to be measured for their body sizes and tested for their bressiere wearing. he results were as follows; 1. In order to develop the basic patterns of elderly women's bressieres, 90B size was selected and then, their bressiere fitting was tested. The foundation pattern of the size 90A was proved for the body by the wearing tests. Each angle and length of the parts on the basic line of the breasts played an important role on setting the pattern. 2. As based on the body surface shell extracted from a plastic mold(photo.2), the cup of brassiere pattern were applied to the body surface shell(photo.4), and full side stretch-wings were applied to 13% reduced body size. The design pattern of elderly women's brassiers were characterized by a round wired as well as a full cup(3piece) embracing the entire breasts. 3. As the result of the wearing test, the excellence of the experimental brassiere was recognized objectively, with high marks in all the items(fig. 6). The experimental brassiere was covering the whole breasts to cope with change according to breasts loosing. It was designed to support the breasts firmly.
Most of the ear shells of hearing aids are manufactured manually, and it is one of the reasons that the cost of the custom-made hearing aids can be increased. Thus it is required to manufacture the ready-made ear shell for the purpose of easy manufacturing and decrease in cost. In this study, we extract parameters in order to manufacture the ready-made ear shell for CIC type hearing aids and simulate to reconstruct the ear shell using the extracted parameters. To parameter extraction, we set up the eleven parameters for the ready-made ear shell based on anatomical characteristics of the ear canal, and we found values of the parameters from twenty-one impressions in their 20s and twelve impressions in their 60s using aperture detection and feature detection algorithms. Classifying the parameters by size, we also determine the parameters of ready-made ear shell into three types for people in their 20s and two types for people in their 60s. Each ready-made ear shell was simulated to reconstruct using figured parameters, and evaluated the rate of agreement with unused impressions for setting parameters. To evaluate the ready-made ear shell, we calculate the volume ratio and intersection between of the each impression and ready-made ear shell, and the intersection ratio using the intersection volume and ready-made ear shell volume. As a result, the volume ratio was about 70%, and volume match ratio was also up to 70%. It means that the ready-made ear shell we simulated is the significantly matched to impression.
Sand deposit with shell units is exposed in Hasa-ri, Yeonggwang-gun, Jeonnam province. We investigated the characteristics of sand sediment topography in the Yeonggwang coastal area to collect evidence of the paleo-environmental change. We performed analysis on particle characteristics, chemical composition, and the age of deposition of sediments. The deposit comprise moderately well sorted medium and fine sand ($1.00{\sim}2.19{\varphi}$). Various sedimentary structures can be observed. Geochemical characteristics change by depth and the degree of variation with depth is small. The results obtained from OSL dating show that sand layers below shell units are deposited 0.32-0.43 ka. As the elevation of the shell unit far mean high water levels or highest high water level, the extensive shell layers could only have been deposited during storm surge conditions. Aeolian processes are discounted due to the size of clasts and the location at which they occur. Results of age dating of the surrounding deposits indicate shell deposits formed after around 300 years age. There is a distinct difference between sedimentary layers including dark brown-black layer. The sedimentary characters such as particle size and geochemistry show difference with depth. It is presumed that depositional environmental in Hasa-ri has changed several times before. This study is expected to contribute to finding an evidence about occurrence of storm surges.
본 연구는 3종의 기능성 마이크로 캡슐을 제조하고 이 기능성 마이크로 캡슐을 이용하여 기능성 샴푸를 제조하였다. 구체적으로는 (1) 코아-멘톨, 쉘-멜라민 수지로 제조로 된 기능성 마이크로 캡슐, (2) 코아-멘톨, 쉘-레시틴, (3) 코아-시나몬 오일, 쉘-레시틴로 합성한 기능성 마이크로 캡슐이다. 제조한 기능성 마이크로 캡슐의 크기 및 형태 평가는 광학현미경, SEM 및 DLS를 통해 수행한 결과 0.1~0.2 ㎛의 크기와 원형형태의 마이크로 캡슐임을 확인할 수 있었다. 따라서, 제조된 기능성 마이크로캡슐을 이용하여 기능성 샴푸를 제조하고, 이 제조된 기능성 샴푸를 직접 사용하여 두피 온도를 측정한 결과, 두피 온도가 3~4 ℃ 떨어지는 사실을 알 수 있었다. 이는 코아 물질이 휘발하면서 나타나는 현상으로 예측된다. 추후, 기능성 샴푸의 인체 사용 시 두피의 모공 변화 등을 측정할 예정이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.