• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.94-95
• /
• 2020

Oyster shells are characterized by coarse and coarse grains, but similar in strength to sand, and egg shells are fine grains but weak in strength. In terms of supply and demand of raw materials, oyster shells can be supplied only in limited periods and regions in winter and south coast of the year, but egg shells have the advantage of being able to supply and supply nationwide 365 days. This study aims to study the change in strength characteristics by mixing oyster shell powder and egg shell powder with the same particle size and mixing up to 150%. The conclusions of the flexural and compressive strength tests of mortar mixed with oyster shell powder and egg shell powder are as follows. The 7-day flexural and compressive strength with ESP added and the 3-day flexural and compressive strength with OSP added were similar, which is thought to be because the strength of OSP is higher than that of ESP.

• Journal of Powder Materials
• /
• v.23 no.2
• /
• pp.91-94
• /
• 2016

High-quality colloidal CdSe/ZnS (core/shell) is synthesized using a continuous microreactor. The particle size of the synthesized quantum dots (QDs) is a function of the precursor flow rate; as the precursor flow rate increases, the size of the QDs decreases and the band gap energy increases. The photoluminescence properties are found to depend strongly on the flow rate of the CdSe precursor owing to the change in the core size. In addition, a gradual shift in the maximum luminescent wave (${\lambda}_{max}$) to shorter wavelengths (blue shift) is found owing to the decrease in the QD size in accordance with the quantum confinement effect. The ZnS shell decreases the surface defect concentration of CdSe. It also lowers the thermal energy dissipation by increasing the concentration of recombination. Thus, a relatively high emission and quantum yield occur because of an increase in the optical energy emitted at equal concentration. In addition, the maximum quantum yield is derived for process conditions of 0.35 ml/min and is related to the optimum thickness of the shell material.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.3
• /
• pp.256-265
• /
• 2017

Seafood is attracting attention as a future food industry. In recent years, the demand for fishery equipment of mechanization, automation, and unmanned was increased due to the environment affected by seafood processing, stricter regulations on safety, decline and aging of fishery worker. Ark shell (Scapharca subcrenata) was being produced in many steps in the production process. The process has been made such as collection-landing-washing-first sort (goods/non-goods)-transports-second sort (size). It was undergone first and second steps by delivering to the consumer. Here, the first step is to sort goods to collection and the second step is to sort by size. The fishery workers need ten people in first step and six people in second step. The workload of one hour per kg is 4,247 kg/h in first step and 2,213 kg/h in second step. In addition, the goods ratio by work process was 79% in first step and 98% in the second step. In this process, a lot of fishery worker and working time is needed. Therefore, this study developed elemental techniques for an automated size sorting system considering the working process problem, time and situation for washing and sorting of ark shell.

• Journal of fish pathology
• /
• v.11 no.1
• /
• pp.35-41
• /
• 1998

We investigated the optimal concentration of lidocaine and MS-222 (tricaine methanesulfonate) for the exfoliation and recovery of abalone, Haliotis discus hannai in different shell lengths, for the purpose of preventing the damage of shell and muscle. However, most anaesthetics applied at present have a strong toxic effect on abalone. MS-222 is the only anaesthetic which is approved for use in food fish by FDA, and lidocaine belongs to a group of anaesthetic which are used in human medicine. These chemicals were evaluated as anaesthetic for different shell size of abalone. The response varied for different shell size groups (shell length 1, 2 and 3 cm). In this study, we suggested the result that the exfoliation and recovery time by lidocaine and MS-222 in shell length 1 cm group were more shorter than in 3 cm group. In shell length 1 cm group, the optimal concentrations of lidocaine and MS-222 for anaesthetic were 200 ppm and 100 ppm, respectively. Lidocaine and MS-222 are preferable to other conventional abalone anaesthetics since these are cheap, safe and convenient to use.

• Steel and Composite Structures
• /
• v.36 no.6
• /
• pp.631-642
• /
• 2020

This paper studies nonlinear stability behavior of a nanocrystalline silicon curved nanoshell considering strain gradient size-dependency. Nanocrystallines are composite materials with an interface phase and randomly distributed nano-size grains and pores. Imperfectness of the curved nanoshell has been defined based on an initial deflection. The formulation of nanocrystalline nanoshell has been established by thin shell theory and an analytical approach has been used in order to solve the buckling problem. For accurately describing the size effects related to nano-grains or nano-pores, their surface energies have been included. Nonlinear stability curves of the nanoshell are affected by the size of nano-grain, curvature radius and nano-pore volume fraction. It is found that increasing the nano-pore volume fraction results in lower buckling loads.

• Journal of Adhesion and Interface
• /
• v.4 no.1
• /
• pp.35-42
• /
• 2003

Polystyrene nanocapsules containing octadecane as a core material were prepared by miniemulsion polymerization. The morphology and size of the nanocapsules were measured with varying the surfactant concentration, content of initiator, core/shell ratio and content of comonomer. The morphologies of the prepared nanoparticles were examined by a scanning electron microscope, a transmission electron microscope and the core material was confirmed by a differential scanning calorimeter. The particles below 70 nm in diameter were formed at a high surfactant concentration. The size of the nanoparticles was not significantly affected by the initiator content. With increasing the core/shell ratio and polar comonomer content, the particle size and its distribution were increased.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.7
• /
• pp.51-60
• /
• 2008

In this paper, the behaviour of shell foundation was studied. In the theoretical program, the general shallow foundation theories and failure mechanism developed by Terzaghi, Mayerhof and others were reviewed and compared. In the numerical study, the 2 and 3 dimensional FEM simulations were carried out using an uncoupled-analysis approach. The results obtained from the model test show that the bearing capacity of shell foundation was about 25% to 30% larger than that of general foundation. Due to the cases of shell angle, the maximum bearing capacity of shell foundation shows when the shell angle of foundation was $60^{\circ}$. In addition, even if the shell foundation has various advantages compared with the general foundations as described above, the practical verifications in full scale size will be necessary to use in the field and will be helpful in the technical development of other special foundations.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1551-1554
• /
• 2007

To overcome defect due to large surface of nanoparticle, a redispersible Eu doped $LnPO_4:LnPO_4$ core/shell nanoparticles were prepared in a highboiling coordinating solvent. The particle size of the synthesized core/shell nanophosphors was estimated to be about 8 nm by TEM. In this core/shell nanoparticle, the concentration of Eu ion was optimized on the basis of the emission intensity under UV ray excitation. Also, the PL properties of the nanophosphors have been compared with those of the $LnPO_4:Eu$ nanoparticles.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1495-1498
• /
• 2005

Due to an efficient red emission, $Eu^{+3}$ ions have doped in various host materials. Eu-doped $LaPO_4/LaPO_4$ core/shell nanophosphor which emits red light in visible range, was synthesized by using a solution system. The mean size of the nanoparticle observed by TEM was about 7-8 nm. In this core/shell system, the thickness of $LaPO_4$ shell was optimized on the basis of relative PL emission intensity. In addition, the luminescent properties of $LaPO_4:Eu/LaPO_4$ core/shell particle have been compared with Eu-doped $LaPO_4$ bulk particle and nanoparticle.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.11 s.170
• /
• pp.2040-2049
• /
• 1999

The Rayleigh-Ritz method is used to investigate the natural frequencies and mode shapes of the ring stiffened cylindrical shells with a rectangular cutout. The cutout is located on the center of the shell. The Love's thin shell theory combined with the discrete stiffener theory is adopted to formulate the analytical model of the shell. The effect of stiffener eccentricity, number, and position on vibration characteristics of the shell is examined. Also the effect of cutout size is examined. By comparison with previously published analytical and new FEM results, it is shown that natural frequencies and mode shapes can be determined with adequate accuracy.