• The Korean Journal of Malacology
• /
• v.21 no.2 s.34
• /
• pp.81-93
• /
• 2005

Reproductive cycle with the gonadal phases, first sexual maturity, artificial spawning amount by the size and spawning interval of the hard clam, Meretrix lusoria were investigated by histological observations and morphometric data by artificial spawning induction. Meretrix lusoria is dioecious and oviparous. The reproductive cycle of this species can be classified into five successive stages: early active stage (January to March), late active stage (February to May), ripe stage (April to August), partially spawned stage (June to September), and spent/inactive stage (September to February). The spawning period was from June to September, and the main spawning occurred between July and August when the seawater temperature exceeds over $20^{\circ}C$. Percentage of first sexual maturity of female and male clams ranging from 40.0 to 45.0 mm in shell length was over 50%, and all clams over 50.0 mm in shell length sexually matured. Female and male clams ranging from 40.0 to 45.0 mm in shell length are considered to be two years old. Therefore, we assume that the hard clams of both sexes begin reproduction from two years of age. The mean number of the spawned eggs increased with the increase of size (shell length) classes. In case of artificial spawning induction, the number of spawned eggs from the clams of a sized class was gradually decreased with the increase of the number of the spawning frequencies (the first, second, and third spawnings). In the experiments of artificial spawning induction during the spawning season, the interval of each spawning was estimated to be 15-18 days (average 17 days).

• Korean Journal of Veterinary Research
• /
• v.33 no.2
• /
• pp.277-283
• /
• 1993

In the present study, observations were made on the life-history of Lymnaea viridis under laboratory conditions, involving incubation period of the eggs and their hatching rate, shell length of the newly hatched snails, sexual maturity, size of the snails when the snail produced the first egg-mass, the number of eggs in each egg-mass, egg-laying, ovipostion, growth rate of the snails, and longevity of the snail. At temperatures between $19.8^{\circ}C$ to $22.5^{\circ}C$, incubation period of the eggs occupied 10~12 days, and after beginning of hatching, all young snails emerged completely from the egg-mass within 5 days. The hatching rate was 88%. The average shell length of the newly hatched snails was about 0.064cm. The rate of growth was extraordinarily rapid under good laboratory conditions. When two snails were reared in one culture vessel($20{\times}15{\times}5cm$) with blue-green algae at about $22^{\circ}C$, snail growth was optimal, taking 37 days to reach 1.2cm in shell length. Sexual maturity reached in about 19 days. The size of the snails at sexual maturity was $0.78{\pm}0.05cm$ in length and $0.47{\pm}0.04cm$ in width. The first egg-masses produced were $0.59{\pm}0.22cm$ in length and $0.34{\pm}0.08cm$ in width, and contained 7~38 eggs. The eggs are usually laid in water. The egg-laying was affected by food and temperature. Snails fed with blue-green algae at about $22^{\circ}C$ produced larger egg-masses than the snails fed with fish food at about $26^{\circ}C$. Under conditions of continuous activity and growth, the maximum expectation of life appears to be 109~350(mean 230) days. And the shell length of snails at death were 1.39~1.64cm.

• The Korean Journal of Malacology
• /
• v.5 no.1
• /
• pp.1-9
• /
• 1989

A scanning electron microscopic study on the glochidium and glchidial encystment of Anodonta grandis on the guppy was conducted. The shape of the glochidium is apparently triangular and its averge size is 0.45mm X0.4mm when closed, The two glochidial shell valves are of the same size, kept together by a ligament of 120${\mu}{\textrm}{m}$ in length and 7 ${\mu}{\textrm}{m}$ in width. Each of the glochidial shell valves has a 16 ${\mu}{\textrm}{m}$ long hook sitdded with many spines on the superior face. A large area to the apex of the valve surrounding the base of the hook is provided with numerous small spines which become progressively smaller towards the periphery of the area, The external surface of the glochidial shell valve is covered with numerous small processes showing successive change in the shape and the pattern of destribution by part. Besides the processes, there are a number of niches scattered all over the exterior surface. The glochidial shell valve has two layers. One is the outer thin membrane bearing the processes and the niches and the others is the inner layer bearing numerous holes which any accessory structure and 2.65 ${\mu}{\textrm}{m}$ in diameter, emerges from a canal located at center of ventral plate of the mamtle, A total of three types of the hair cells are observed. In present artificial infection of the glochidium to the guppy, it took about three to four hours to complete an early cysts, During the period of encystment, The epithelial cells of the host fish actively migrated toward the attached glochidium and covered it.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.6
• /
• pp.2554-2575
• /
• 2020

Data hiding technology hides secret information into the carrier, so that when the carrier is transmitted over network, it will not attract any malicious attention. Using data compression, it is possible to reduce the data size into a small compressed code, which can effectively reduce the time when transmitting compressed code on the network. In this paper, the main objective is to effectively combine these two technologies. We designed a data hiding scheme based on two techniques which are turtle-shell information hiding scheme and absolute moment block truncation coding. The experimental results showed that the proposed scheme provided higher embedding capacity and better image quality than other hiding schemes which were based on absolute moment block truncation coding.

• The Korean Journal of Malacology
• /
• v.29 no.1
• /
• pp.43-50
• /
• 2013

We investigated the growth performance of oysters (initial shell height $57.5{\pm}8.5$ mm) under differing conditions of tidal exposure time and culture rack height in an experiment that commenced in April, 2011. Significant differences were observed in shell height from June 2011, in total weight from August, and in meat weight from September. Fatness tended to decrease during the experimental period, but was not significantly different at the end of the experiment. Significant differences in survival rates were mainly observed from June to August. After September, further changes were not observed in any experimental treatment group. The greatest growth potential ($L_{\infty}$) and survival rate were observed at a sea level of approximately 116 cm. The results indicate that in the study area the use of oyster culture conditions involving 1 or 2 h of tidal exposure and 60 - 70 cm rack height could result in oysters reaching the favored commercial half shell size within 14 months, with > 80% survival.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.539-544
• /
• 2013

$Ag@SiO_2@SiO_2$(FITC) nanocomposites were prepared by the simple polyol process and St$\ddot{o}$ber method. Fluorescence enhancement of fluorescein moiety (fluorescein isothiocyanate, FITC) was investigated in the presence of silver nanoparticles in $Ag@SiO_2@SiO_2$(FITC) system with varying thickness (X nm) of first silica shell. Maximum enhancement factor of 4.3 fold was achieved in $Ag@SiO_2@SiO_2$(FITC) structure with the first silica shell thickness of 8 nm and the average separation distance of 11 nm between the surface of silver nanoparticle and fluorescein moiety. The enhancement is believed to be originated from increased excitation rate of fluorescein moiety due to concentrated local electromagnetic field which was improved by interaction of light with silver nanoparticles.

• Earthquakes and Structures
• /
• v.26 no.4
• /
• pp.299-309
• /
• 2024

The present paper develops application of third-order shear deformation theory (TSDT) and modified couple stress theory (MCST) to size-dependent bending analysis of a functionally graded cylindrical micro-shell. The radial and axial displacement components are described based on TSDT for more accurate analysis. The effect of small scales is accounted based on MCST. The principle of virtual work is used for derivation of bending governing equations. The solution is presented for a simply-supported boundary condition to account the influence of various important parameters such as micro length scale parameter, in-homogeneous index and some dimensionless geometric parameters such as length to radius and length to thickness ratios on the bending results. A comparative analysis is presented to examine the effect of order of employed shear deformation theory on the axial and radial displacements.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.12
• /
• pp.1958-1967
• /
• 2004

This paper describes the method to rapidly fabricate the large-sized physical model with the envelope model size of more than 600 mm${\times}$ 600 mm${\times}$ 600 mm using two type semi-automatic VLM-ST processes in connection with the reverse engineering technology. The fabrication procedure of the large-sized solid shape is as follows: (1) Generation of STL data from 3D scan data using 3D scanner, (2) generation of shell-type STL data by Boolean operation, (3) division of shell-type STL data into several pieces by solid splitting, (4) generation of USL data for each piece with VLM-Slicer, (5) fabrication of each piece by cutting and stacking according to USL data using VLM-ST apparatus, (6) completion of a shell-type prototype by zigzag stacking and assembly for each piece, (7) completion of a 3D solid shape by foam backing, (8) surface finish of a completed 3D solid shape by coating and sanding. In order to examine the applicability of the proposed method, the miniature of the Mount Rushmore Memorial has been fabricated. The envelope model size of the miniature of the Mount Rushmore Memorial is 1,453 mm${\times}$ 760 mm${\times}$ 853 mm in size. From the result of the fabricated miniature of the Mount Rushmore Memorial, it has been shown that the method to fabricate the large object using two type semi-automatic VLM-ST processes in connection with the reverse engineering technology are very fast and efficient.

• Journal of Aquaculture
• /
• v.17 no.3
• /
• pp.197-208
• /
• 2004

Five commercially valuable Korean Veneroid, Protothaca jedoensis, Ruditapes philippinarum, Saxidomus purpuratus, Cyclina sinensis and Meretrix lusoria were recognized by comparing internal and external morphological characters. As length of the primary tooth was directly grown proportional to shell size but all other characters were not measured according to size of shell. Hence, the morphological characters of these Veneroids may be estimated from the size of the unique primary tooth and it might be enough to be a good criterion for identification of species among Veneriods. Numerical index of hinge plate length of these species was assessed systematically, irrespective of measuring the length, height and width of the shell. The highest internal and external morphological similarity was observed between P. jedoensis and R. philippinarum and the lowest similarity was observed between P. jedoensis and M. lusoria. These similarities may be affected by multiple environmental factors as well as genetic characters. For artificial seed production of P. jedoensis, R. philppinarum, a closest relative among the five species, must be focussed.

• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.199-206
• /
• 2003

The charcoal-encapsulated methyl silica microcapsules were prepared by a O/W microemulsion sol-gel method, and the adsorption properties on aquatic humic acid were investigated. The capsules prepared were spherical, $100{\sim}1000{\mu}m$ in size. The size distribution was controllable by adjusting the size of charcoal powder, charcoal/methyl silica ratio, and agitating speed in O/W sol-gel process. Adsorption efficiency of charcoal for aquatic humic acid was decreased after encapsulation by methyl silica shell. The decreased adsorption efficiency can be dependent on the decrease of the BET surface area and pore volume after encapsulation. Diffusion properties of humic acid through the capsule shell also played an important role on adsorption efficiency. Therefore, the reasonable target pollutants for the capsules can be VOC or odor molecules which can overcome diffusion barrier through shell of capsules in air condition. Functionalization methods for the charcoal-encapsulated $CH_3(SiO)_n$ microcapsules by incorporation of $TiO_3$ as a phtocatalytic function and by incorporation of inorganic pigment as a color function were also investigated. $TiO_2$ coating properties were controllable by adjusting pH, temperature, and the concentration of $TiOSO_4$. In XRD measurement, the crystal form of the coated $TiO_2$ was anatase. For the colorization of the capsules, inorganic pigments were more efficient than organic dyes, and various color was introduced to the capsules using inorganic pigments.