• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.10
• /
• pp.1807-1815
• /
• 1992

The vibration characteristic of thin laminated orthotropic cylindrical shell is investigated based on the Donnell theory. The Rayleigh-Ritz variational procedure is employed. For the variety of shell end conditions, the beam characteristic function is used for the axial mode function. The result of the present analysis is in good agreement with some available analytical results and NASTRAN and BOSOR4 calculations. In the present study, the relation between natural frequencies and orthotropic parameter k is investigated. Introducing the frequency parameter, this study shows that the frequency parameter increases as the orthotropic parameter k approaches to one.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.3
• /
• pp.244-252
• /
• 2004

The theoretical method is developed to investigate the vibration characteristics for the partially fluid-filled continuous cylindrical shells with the intermediate supports. The intermediate supports are simulated by two types of artificial springs : the translational spring for the translation for each direction and the rotational spring for a rotation. The springs are continuously distributed along the circumferential direction. By allowing the spring stiffness to become very high compared to the stiffness of the structure, the rigid intermediate supports are approximated. In the theoretical procedure, the Love's thin shell theory is adopted to formulate the theoretical model. The frequency equation of the continuous cylindrical shell is derived by the Rayleigh-Ritz approach based on the energy method. Comparison and convergence studies are carried out to verify and establish the appropriate number of series term and the artificial spring stiffness to produce results with an acceptable order of accuracy. The effect of intermediate supports, their positions and fluid level on the natural frequencies and mode shapes are studied.

• Journal of the Korean Chemical Society
• /
• v.61 no.3
• /
• pp.89-96
• /
• 2017

This study proposed adsorption of Pb(II) ions from aqueous solution using activated carbon prepared from areca catechu shell (ACS AC) using Timphan Method. The effects of independent variables on adsorption kinetic and isotherm have been investigated by conducting experiments in batch mode at neutral pH. The structural characterization of adsorbent was done by FT-IR and SEM analysis. The Pb(II) adsorption was correlated very well with the pseudo second-order kinetic (PSOKM) and Langmuir isotherm models (LIM). Increasing NaOH mass for activation and adsorption temperature increased weakly all the parameters of adsorption kinetic and isotherm. The Pb(II) ions adsorption capacity of the ACS AC at 27 and $45^{\circ}C$ was 50.51 and 55.25 mg/g, respectively. Thermodynamic parameters were determined, and the results confirmed the Pb(II) ions adsorption should be endothermic and spontaneous process, and both physical and chemical adsorption should be taken place.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.929-936
• /
• 1986

Free vibration characteristics of laminated orthotropic circular cylindrical shells with clamped free boundary condition are investigated. The solution is obtained through a direct solution procedure with axial mode displacements represented as simple Fourier series expressions. On the basis of the thin shell theories of Sanders, Love, Loo, Morley and Donnell, the 4*$ frequency determinant is derived and is expressed in a unified form. Various numerical examples determining the natural frequencies of circular cylindrical shells with isotropic material and also with layers of orthotropic elastic material arbitraily laminated either symmetrically or anti-symmetrically about the shell middle surface. The results obtained compared very well with some available experimental and numerical results.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.5
• /
• pp.368-376
• /
• 2001

Performance of heat exchanger was evaluated to heat exchanger using oscillating heat pipe for waste heat recovery of low temperature. Oscillating heat pipe used in this study was formed to the closed loop of serpentine shapes using copper tubes. Heat exchanger was formed to shell and tube type and composed of low finned tube. R-22 and R-141b were used to the working fluids of tube side and their charging ratio was 40%. And, water was used to the working fluid of shell side. As the experimental parameters, the inlet temperature difference of heating and cooling part of secondary fluid and the mass velocity of secondary fluid were used. The mass velocity of secondary fluid was changed from 90 kg/$m^2s\; to\;190 kg/m^2$s from the experimental results, heat recovery rate was linearly increased to the increment of the mass velocity of secondary fluid and the inlet temperature difference of secondary fluid. Finally, the performance of heat exchanger was evaluated by using $\varepsilon$-NTU method. It was found that NTU was about 1.5 when effectiveness was decided to 80%.

• Structural Engineering and Mechanics
• /
• v.6 no.1
• /
• pp.41-61
• /
• 1998

A state-of-the-art report on the new finite elements formulated by the addition of nonconforming displacement modes has been presented. The development of a series improved nonconforming finite elements for the analysis of plate and shell structures is described in the first part of this paper. These new plate and shell finite elements are established by the combined use of different improvement schemes such as; the addition of nonconforming modes, the reduced (or selective) integration, and the construction of the substitute shear strain fields. The improvement achieved may be attributable to the fact that the merits of these improvement techniques are merged into the formation of the new elements in a complementary manner. It is shown that the results obtained by the new elements give significantly improved solutions without any serious defects such as; the shear locking, spurious zero energy mode for the linear as well as nonlinear benchmark problems. Recent developments in the transition elements that have a variable number of mid-side nodes and can be effectively used in the adaptive mesh refinement are presented in the second part. Finally, the nonconforming transition flat shell elements with drilling degrees of freedom are also presented.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.2
• /
• pp.79-84
• /
• 2012

This study aimed to analyze the nonlinear buckling of ring-stiffened circular cylinders under uniform external pressure, e.g. hydrostatic pressure, considering material nonlinearity and initial imperfection. In the present study, we analyzed the collapse pressure of pressure vessels using ANSYS Workbench, which is a framework of finite element methods. First, linear buckling analysis is performed to find collapse modes of the model. Second, scaling the first mode shape with small factor, geometric model is pre-deformed. And then, by analyzing the nonlinear buckling of the pre-deformed shape, the collapse pressure is estimated. To verify the validity of the analyses, we compared the results with Ross' experimental results. Finally, we applied it to ring-stiffened circular cylindrical shell of the pressure hull of a small submarine.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.343-353
• /
• 2020

Based on the Precise Transfer Matrix Method (PTMM), the dynamic model is constructed to observe the vibration behaviour of cylindrical shells with variable thickness by solving a set of first-order differential equations. The free vibration of stiffened cylindrical shells with variable thickness can be obtained to compare with the exact solution and FEM results. The reliability of the present method of free vibration is well proved. Furthermore, the effect of thickness on the vibration responses of the cylindrical shell is also discussed. The acoustic response of immersed cylindrical shells is analyzed by a Pluralized Wave Superposition Method (PWSM). The sound pressure coefficient can be gained by collocating points along the meridian line to satisfy the Neumann boundary condition. The mode convergence analysis of the cylindrical shell is carried out to guarantee calculation precision. Also, the reliability of the present method on sound radiation is verified by comparing with experimental results and numerical results.

• Structural Engineering and Mechanics
• /
• v.81 no.6
• /
• pp.769-780
• /
• 2022

This paper studies the dynamic behavior of laminated composite circular cylindrical shells interacting with a fluid. The mathematical formulation of the dynamic problem for an elastic body is developed based on the variational principle of virtual displacements and the relations of linear elasticity theory. The behavior of an ideal compressible fluid is described by the potential theory, the equations of which together with boundary conditions are transformed to a weak form. The hydrodynamic pressure exerted by the fluid on the internal surface of the shell is calculated according to the linearized Bernoulli equation. The numerical implementation of the mathematical formulation has been done using the semi-analytical finite element method. The influence of the ply angle and lay-up configurations of laminated composites on the natural vibration frequencies and the hydroelastic stability boundary have been analyzed for shells with different geometrical dimensions and under different kinematic boundary conditions set at their edges. It has been found that the optimal value of the ply angle depends on the level of filling of the shell with a fluid. The obtained results support the view that by choosing the optimal configuration of the layered composite material it is possible to change upwards or downwards the frequency and mode shape, as well as the critical velocity for stability loss over a wide range.

• Wind and Structures
• /
• v.30 no.6
• /
• pp.559-573
• /
• 2020

This paper presents a study on the effectiveness of the proper orthogonal decomposition (POD) technique for reconstruction of wind pressure field as applied to a cylindrical shell roof based on simultaneously measured wind pressure data. The influence of wind loading mode truncation on the statistics of dynamic pressures and wind load effects are investigated. The results showed that truncation of higher wind loading modes can have more noticeable influence on the maximum and minimum pressures that the standard derivation (STD) values. The truncation primarily affects the high-frequency content of the pressures. Estimation of background response using wind loading modes is more effective than the use of traditional structural modal analysis.