• Ocean and Polar Research
• /
• v.28 no.3
• /
• pp.215-224
• /
• 2006

Spatial variation of heavy metal accumulation was investigated in Manila clam Ruditapes philippinarum collected from several tidal flats. Sediment metal levels varied highly among the sites, which was attributed primarily to differences in Fe and organic carbon contents and in part to gain size. Significant differences in metal concentrations also were found in the clam tissue among the different sampling sites. However, except for a few metals (Mn, Zn, Pb), which showed some elevation, the variations in the clam tissue were not related to the variations in the sediment. This is likely because most metals in filter-feeding herbivores such as R. philippinarum accumulated as a result of feeding on suspended particles such as phytoplankton and organic detritus in the water column, not in bottom sediment. In addition, tissue weight for a specific shell size varied significantly among the sites, and increased tissue mass indicating a good nutritive condition likely caused a subsequent dilution of body metals leading to reduced weight-specific concentrations of some metals (Cd, Zn, Cu, Co).

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.3
• /
• pp.129-140
• /
• 2013

Bottom Ash is industrial by-product from a thermoelectric power plant. An immense quantities of bottom ash have increased each year, but most of them is reclaimed in ash landfill. In this study, in order to raise recycling rate of Bottom Ash, it is suggested to cure Bottom Ash (BA) mixtures mixed with cement, lime, Fly Ash (FA), and oyster shell (OS). Mixtures of 5~20 % mixing ratio had been cured for 1, 3, 7, 14, and 28 days using sealed curing and air-dry curing method. Unconfined compressive strength test was conducted to determine strength and deformation modulus ($E_{50}$) change for mixtures as mixing ratio and curing day, water contents of mixtures were measured after test. As a result, strength and $E_{50}$ were increased as mixing ratio and curing days, but values and tendencies of them appeared in different as kind of mixture, mixing ratio, curing method, and curing days. The results showed the addition of cement, lime, Fly Ash, and oyster soil in Bottom Ash could improved strength and $E_{50}$ and enlarge its field of being used.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.4
• /
• pp.208-212
• /
• 1975

The study was conducted to determine the optimum conditions for keeping quality of shucked sea mussel, Mytilus edulis, during marketing under commercial handling. As quality factors, water holding capacity, pH, VBN and TMA content were measured. Water holding capacity was obviously affected by salt content of the sea mussel meat. Water was released at the salinity above $2.8\%$ and absorbed below the value. In case of distilled water added instead salt solution, $23.3\%$ weight was gained. Absorbing or releasing water of sea mussel meat was also influenced by temperature showing either water gain or loss was greater at, $3^{\circ}C\;than\;25^{\circ}C$. Osmotic quilibrium by salt between meat and liquor was held within 4 hours. The pH value of fresh sea mussle marked 6.0 which is somewhat lower when compared with that of other shellfishes, and it gradually decreased to 5.0 during storage. VBN contents of fresh muscle and shell liquor were $2.1mg\%$ and $1mg\%$ respectively. The sour odour began to be detectable with $5.0mg\%$ of VBN content. TMA in the sea mussel was not detected.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.6
• /
• pp.66-71
• /
• 2011

Various single solvents were tested to find the effective solvent for the extraction of algae oil from wet-form Chlorella minutissima. In the case of single solvents, their extractabilities for algae oil were increased with their polarity because the water in wet algae cell is to form a solvent shell around the lipids. Based on these results, the wet-form algae samples were treated with a polar alcohol solvent and then a nonpolar solvent was added in algae residue. In the algae oil extraction by ethanol/n-hexane, total lipid contents were 40-50% and composition of triglyceride in extracted oil was 46.50%. Considering solvent toxicity of conventional solvent mixture such as chloroform and methanol for algae oil extraction, the ethanol/n-hexane system was identified as the effective one for the oil extraction from wet-form Chlorella minutissima.

• Macromolecular Research
• /
• v.11 no.1
• /
• pp.2-8
• /
• 2003

The self-assembly of polymers can lead to supramolecular systems and is related to the their functions of material and life sciences. In this article, self-assembly of Langmuir-Blodgett (LB) films, polymer micelles, and polymeric nanoparticles, and their biomedical applications are described. LB surfaces with a well-ordered and layered structure adhered more cells including platelet, hepatocyte, and fibroblast than the cast surfaces with microphase-separated domains. Extensive morphologic changes were observed in LB surface-adhered cells compared to the cast films. Amphiphilic block copolymers, consisting of poly(${\gamma}$-benzyl L-glutamate) (PBLG) as the hydrophobic part and poly(ethylene oxide) (PEO) [or poly(N-isopropylacrylamide) (PNIPAAm)] as the hydrophilic one, can self-assemble in water to form nanoparticles presumed to be composed of the hydrophilic shell and hydrophobic core. The release characteristics of hydrophobic drugs from these polymeric nanoparticles were dependent on the drug loading contents and chain length of the hydrophobic part of the copolymers. Achiral hydrophobic merocyanine dyes (MDs) were self-assembled in copolymeric nanoparticles, which provided a chiral microenvironment as red-shifted aggregates, and the circular dichroism (CD) of MD was induced in the self-assembled copolymeric nanoparticles.

• Korean journal of food and cookery science
• /
• v.25 no.4
• /
• pp.427-434
• /
• 2009

To increase rice consumption and substitute rice flour for wheat flour to make gluten-free bakery products, the physicochemical and pasting properties of rice flours prepared from raw and soaked rices passed through different size screens were investigated. The quality properties of manju dough and preparation of rice manju were also measured. Dry milled flour with soaked rice (DMFSR) were decreased in ash and crude lipid contents compared to dry milled flour with raw rice (DMFRR). Water binding capacity, damaged starch content, and L value of rice flour increased with decreasing particle size, but the b value decreased. Peak, cold, and breakdown viscosities of DMFSR were higher than those of DMFRR by RVA. Hardness of manju dough with DMFSR was lower than that with DMFRR, but that of manju shell exhibited a reverse trend. Sensory difference testing revealed the smoothness of surface, hardness, roughness, and overall quality were significantly different (p<0.05). The smoothness of the surface of manju with DMFRR-200 and all DMFSR were better than that of manju prepared with wheat flour. Hardness showed lower values in DMFRR-200, and all DMFSR as well as wheat flour and roughness decreased with decreasing particle size. Rice manju with wheat flour, DMFRR-200, DMFSR-120, and DMFSR-170 ranked above 5 points and were not significantly different (p<0.05).

• Polymer(Korea)
• /
• v.33 no.2
• /
• pp.137-143
• /
• 2009

We prepared norfloxacin (NFX)-incorporated polymeric micelle using poly ($\varepsilon$-caprolactone)/poly(ethylene glycol) (PCL/PEG, CE) diblock copolymers. Particle size was from 60 to 200 nm according to the PCL block length. Their critical association concentration (CAC) was decreased according to the increase of PCL block length. $^1H$-NMR study showed core-shell type micelle structures of CE diblock copolymers in the aqueous environment. Drug release from polymeric micelle was continued over 2 days. Duration of drug release was varied according to the PCL block length and drug contents. At antimicrobial activity test, polymeric micelle showed almost similar cytotoxicity compared to NFX itself.

• Safety and Health at Work
• /
• v.7 no.2
• /
• pp.130-137
• /
• 2016

At a brewery, the base plate-to-shell weld seam of a $90-m^3$ vertical cylindrical steel tank failed catastrophically. The 4 ton tank "took off" like a rocket leaving its contents behind, and landed on a van, crushing it. The top of the tank reached a height of 30 m. The internal overpressure responsible for the failure was an estimated 60 kPa. A rupture disc rated at < 50 kPa provided overpressure protection and thus prevented the tank from being covered by the European Pressure Equipment Directive. This safeguard failed and it was later discovered that the rupture disc had been installed upside down. The organizational root cause of this incident may be a fundamental lack of appreciation of the hazards of large volumes of low-pressure compressed air or gas. A contributing factor may be that the standard piping and instrumentation diagram (P&ID) symbol for a rupture disc may confuse and lead to incorrect installation. Compressed air systems are ubiquitous. The medium is not toxic or flammable. Such systems however, when operated at "slight overpressure" can store a great deal of energy and thus constitute a hazard that ought to be addressed by safety managers.

• Journal of Astronomy and Space Sciences
• /
• v.36 no.3
• /
• pp.115-119
• /
• 2019

This paper is a part of the series on positron annihilation spectroscopy of two-phase diffuse gas-and-dust aggregates, such as interstellar medium and the young remnants of type II supernovae. The results obtained from prior studies were applied here to detect the relationship between the processes of the annihilation of the K-shell electrons and incident positrons, and the effects of these processes on the optical spectra of their respective atoms. Particular attention was paid to the Doppler broadening of their optical lines. The relationship between the atomic mass of the elements and the Doppler broadening, ${\Delta}{\lambda}_D$ (${\AA}$), of their emission lines as produced in these processes was established. This relationship is also illustrated for isotope sets of light elements, namely $^3_2He$, $^6_3Li$, $^7_3Be$, $^{10}_5B$ and $^{11}_5B$. A direct correlation between the ${\gamma}-line$ luminosity ( $E_{\gamma}=1.022MeV$) and ${\Delta}{\lambda}_D$ (${\AA}$) was proved virtually. Qualitative estimates of the structure of such lines depending on the positron velocity distribution function, f(E), were made. The results are presented in tabular form and can be used to set up the objectives of further studies on active galactic nuclei and young remnants of type II supernovae.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.3
• /
• pp.147-153
• /
• 2011

This study is to measure the differences of the trace-metals resulted from the different ecologies, such as nickel(Ni), copper(Cu), zinc(Zn), cadmium(Cd), plumbum(Pb), arsenic(As) and chrome(Cr) remaining in the parts of Korean Yeongdeok Crab (KYC) and Russian Snow Crab (RSC) based on ICP-MS. The recovery rate of each metal certified the reference materials (CRM) was in the average of 81~99%, which corresponded with the level required in Codex. The level of metals in the parts of KYC was in the order of Ni > As > Zn > Cu > Cr > Cd in the both male and female shell; the order of Zn > As > Cu > Cr > Ni > Cd in the leg flesh; the order of Zn > As > Cu > Cr > Cd > Ni in the body flesh; the order of Cu > Zn > As > Cd > Cr > Ni in the gill; the order of Cu > As > Zn > Cd > Ni > Cr in the male hepatopancreas; the order of Cu > Zn > As > Cd > Cr > Ni in the female hepatopancreas, thereby showing some differences. It was revealed that the levels of most metals (nickel, copper, zinc, arsenic and chrome) were similar between KYC and RSC except cadmium which was somewhat lower than that of KYC. However, the cadmium in RSC was discovered in high level in most of the parts, two times higher in the hepatopancreas, and four times in the gill. It was also revealed that the trace metal contents were changing according to the size of KYC; the metals with the highest level of Ni in shell, Zn in leg and body flesh, Cu in gill tended to decrease as growing, whereas the cadmium contents tended to increase overall and accumulated the most in hepatopancreas. The results showed there was a possibility that the phenomenon of bioaccumulation within hepatopancreas would increase as growing.