• Journal of the Korean GEO-environmental Society
• /
• v.9 no.2
• /
• pp.15-22
• /
• 2008

Recently loess are used as design and construction materials in some construction sites. However, many problems have come to the fore because the loess was considered merely as ordinary soil, not taking the engineering characteristics of loess into account at all. The purpose of this study is to effectively mix and use the oyster shell-which is the byproduct of oyster farming in the clean and pure water zone of Southwestern region-with loess in a bid to increase the utility, considering that loess itself has the limit for civil engineering purpose, and research the usability of oyster shell as an alternative material for construction.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.1
• /
• pp.1-6
• /
• 2002

Eggs obtained from 46 and 42 weeks old meat (Hybro) and layer (Leghorn) breeders flocks, respectively were used to examine the effects of genetic type of birds and egg size (small, medium and large) on variables of eggshell characteristics and hatchability traits. The variables measured were egg weight (EW), egg surface area (ESA) and eggshell characteristics (shell conductance (EC), per cent shell (PS), shell thickness (ST), shell volume (SV), shell density (SD) and hatchability traits (per cent hatchability (HP), early dead embryos (ED), late dead embryos (LD), pips with live embryos (PL) and pips with dead embryos (PD)). Genetic type of bird influenced all egg characteristics and HP of eggs. Eggs produced by the small Leghorn bird had lower EW, ESA, EC, ST, SV and HP than those produced by the heavy Hybro bird. The reduction of HP was associated with an increase in the percentage of ED and PL. Egg size influenced all variables measured except ST. Small size eggs had lower EW, ESA and EC and higher PS and SD than those of large eggs. Medium size eggs produced a higher HP when compared with that of large size eggs. The reduction of HP in large eggs was associated with higher percentage of ED, LD and PL. There were significant interactions between the genetic group of birds and egg size on LD and HP. Large egg size of Hybro birds had higher LD and lower HP than those of small size eggs produced by the same flock. However, There was no difference in HP and LD among the different egg sizes produced by Leghorn birds. It was concluded that genetic make up of birds and egg size influence eggshell characteristics and HP. The type of bird (heavy or small) influences the optimum egg size for successful hatching. Attention should be given to the size and eggshell characteristics of eggs of breeders' flocks for achieving maximum HP.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.1
• /
• pp.135-139
• /
• 2002

By means of correlation analysis and path coefficient analysis, 18 characteristics of 325 conserved silkworm races were studied for the selecting efficiency on main silk quality characteristics. The result showed that selecting lines with heavier cocoon weight are beneficial to raise the weight of have. Choosing strains with higher cocoon shell percentage, longer filament length and better reelability percentage is good for increasing non-broken filament length. Selecting lines with medium daily weight of have produced in the fifth instar, medium cocoon shell percentage and simultaneously selecting heavier cocoon shell weight are favorable to promote reelability percentage. Choosing strains with heavier cocoon weight, higher cocoon shell percentage, heavier daily weight of bave produced in the fifth instar and heavier weight of bave but shorter filament length may hopefully breed out a race with thick filament size. And selecting strains with heavier weight of have and fine filament size are beneficial to increase filament length. Selecting lines with higher cocoon shell percentage and heavier weight of bave are favorable to raise raw silk percentage of cocoon. There are no significant direct or indirect correlation coefficient between viability and major characteristics of silk quality. It is, therefore, feasible to breed a silkworm race with excellent vitality and good silk quality as well.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.12
• /
• pp.1748-1755
• /
• 2001

The shell and tube heat exchangers were introduced to apply to a big capacity condenser and a high pressure feed water heater for power plant in the beginning of 1990s. Design and manufacturing technology fur shell and tube heat exchangers have been developed until now. But it is very difficult to calculate the expected performance characteristics of the shell and tube heat exchanger, because there are many design parameters to be considered according to internal structure and the shell side heat transfer mechanism complicately related to the design parameters. Design parameters to be considered in the design stage of shell and tube heat exchanger are shell and tube side fluids, flow rate, inlet and outlet temperature, physical properties, type of heat exchanger, outer diameter, thickness, length of tube, tube arrangement, tube pitch, permissive pressure loss on both sides, type of baffle plate, baffle cutting ratio. The propose of study is an analysis TEMA(Tubular Exchanger Manufacturers Association) E shell and tube heat exchanger performance with changing a number of baffles(3, 5, 7, 9, 11) and tubes(16, 20) and determined optimal baffle spacing.

• Computers and Concrete
• /
• v.29 no.2
• /
• pp.117-126
• /
• 2022

The vibrational characteristic of three-layered cylindrical shell (CS) submerged in fluid with the ring support has been studied. The inner and outer layer is supposed to construct by isotropic layer. The composition of central layer is of functionally graded material type. Acoustic Wave condition has been utilized to present the impact of fluid. The central layer of cylindrical shell (CS) varies by volume fraction law that has been expressed in terms of polynomial. The main shell frequency equation has been obtained by theory of Love's shell and Rayleigh-Ritz technique. The oscillation of natural frequency has been examined under a variety of end conditions. The dependence of axial model has been executed with the help of characteristic beam function. The natural frequencies (NFs) of functionally graded material (FGM) shell have been observed of cylindrical shell along the shell axial direction. Different physical parameters has been used to examine the vibration characteristics due to the effect of volume fraction law. MATLAB software has been used to get result.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.1
• /
• pp.143-148
• /
• 2007

The objective of this study was to investigate the proper conditions of calcination and calcium extraction from powdered oyster shell. The physical characteristics such as particle size distribution, surface morphology, and thermal gravity were examined. The following result were obtained. As the powdered oyster shell was ignited in high temperature of $650^{\circ}C$ to $950^{\circ}C$, the calcination reactions was effectively progressed. The amount of weight loss during calcination would be matched with the generation of carbon dioxide gas. In the calcination of powdered oyster shell, the amount of weight loss increased according to the increased of calcination temperature and the decrease of mean particle size. It was founded that the proper temperature and retention time of calcination was $850^{\circ}C$ and 40 minute. In the extraction of calcium into liquid form using acid addition, the calcination oyster shell was more effective than the non-calcinated shell. The liquid calcium extraction technique using the calcinated oyster shell needed more researches considering cost evaluation.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.2
• /
• pp.46-55
• /
• 1999

This study compared the adsorption characteristics of heavy metal ions by crab shell, treated crab shell with 2N-HCl, treated crab shell with 4%-NaOH, chitin and chitosan.Using crushed crab shell, the heavy metal ions removal rates of $Cd^{2+}$ and $Zn^{2+}$ were about 70-80% in 45minutes, but the removal rates of $Cu^{2+}$, $Cr^{6+}$ and $Pb^{2+}$ was less than 10%, 10% and 30%, respectively. For the by-products crab shell by 2N-HCl treatment, it was shown that the removal rates of $Cu^{2+}$ and $Pb^{2+}$ were about 70-80% in 45minutes reaction. But, some problems were observed, that the contained protein in crab shell was changed into gel in the mixing solution after a few hours. For the by-products of crab shell by 4%-NaOH treatment, the removal rates of Pb and Zn were about 90% in 45 minutes, and those of capacity of chitin and chitosan powder was better than those of the other by-products. The more adding to the adsorbent dosages increased the removal rates, and the adsorption reaction was rapidly occurred in a few minute. Using 1.0 wt% chitin powder, the heavy metal removal rates were ordered $Cu^{2+}$(94%) > $Zn^{2+}$(89%) > $Cd^{2+}$(88%) > $Pb^{2+}$(77%) > $Cr^{6+}$(58%) in 45 minutes. Using 1.0 wt% chitosan powder, the heavy metal removal rates were ordered $Cu^{2+}$(99%) > $Pb^{2+}$(96%) > $Cd^{2+}$(79%) > $Zn^{2+}$(71%) > $Cr${6+}$(46%) in 45minutes. The degree of degree of deacetylation by prepared chitosan was 91%.The Freundlich adsorption isotherm of $Cu^{2+}$, $Cd^{2+}$ and $Zn^{2+}$, when it was applied to 1.0 wt% chitosan powder in minutes, can be acceptable very strictly. The equation constant (1/n) for $Cu^{2+}$, $Cd^{2+}$ and $Zn^{2+}$ were 0.54 0.41 and 0.23 respectively.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.785-789
• /
• 2002

Sound measurement experiments and Finite Element analysis are carried out to understand the characteristics of the noise propagation and structure of the compressor in this research. Noises generated from the compressor on various conditions are measured to classify the transmission path of the noise propagation with respect to the sources. The experiment results show that noises attributed to the shell bending resonant modes accounts fer a major portion of the spectra and that damping spring of the discharge pipe have a damping effect on some frequency range. Constructions of the FE model show that the curvature of the upper shell is very important for the resonance of the upper shell. And, present upper shell has a difficult shape to be manufactured. And, in this research, shape optimization is conducted to increase the strength of the shell for the reduction of the noise. Sound spectrum of noise from the modified compressor verified the sound reduction.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.62-63
• /
• 2018

Oyster shell is produce by shucking process in oyster farming in southern coast of Korea. In average, about 6.7kg of oyster shell is produced as an industrial waste for 1kg of oyster flesh, and even only in last year, it is estimated that about 150,000 ton of oyster shell is produced. Oyster shell is light weighted and the strength characteristic of it is similar to send. So we produced mortar test piece using grounded oyster shell according to aggregate and reviewed strength characteristic. Therefore, in this study, the strength characteristics of the test specimen are evaluated by artificially altering fineness modulus and curing method by processing oyster shells.

• The Korean Journal of Malacology
• /
• v.27 no.1
• /
• pp.35-42
• /
• 2011

In order to understand effect of polycyclic aromatic hydrocarbon (PAH) on shell repair of the Pacific oyster, Crassostrea gigas, shell regeneration experiments were carried out using oysters drilled a hole on the right valve. The change of pH and hemocytic characteristics in both extrapallial fluid and hemolymph were observed during the shell repair. The thickness of mantle tissue was apparently decreased, while necrosis in epithelium and periostracal gland was increased in response to PAH exposure. Our finding suggested that PAH could adversely influence on shell repair.