• 한국식품영양학회지
• /
• 제37권3호
• /
• pp.152-161
• /
• 2024

This study investigated the influence of incorporating chestnut inner shell powder (CISP) at varying levels (0%, 3%, 6%, 9%, and 12% w/w) on the quality, antioxidant potential, and consumer preference of garaetteok, a Korean rice cake. Findings revealed a decrease in moisture content and pH with increasing CISP content. Color analysis indicated a reduction in lightness (L) and yellowness (b) values, while redness (a) values increased. Textural properties displayed an increase in hardness, chewiness, and gumminess, but a decrease in springiness, adhesiveness, and cohesiveness with increasing CISP levels. Sensory evaluation for appearance, taste, flavor, texture, and overall preference revealed the sample containing 6% CISP to be the most favorable. Moreover, the antioxidant activity of the garaetteok exhibited a positive correlation with increasing CISP content. In conclusion, incorporating 6% CISP resulted in improved quality characteristics for garaetteok development, offering enhanced nutritional value, antioxidant properties, and overall consumer preference.

• 한국음향학회지
• /
• 제15권5호
• /
• pp.99-106
• /
• 1996

컴프레서의 소음은 냉장고로부터 발생하는 전체 소음레벨중 높은 기여를 나타낸다. 그리고, 컴프레서로부터 방사되는 소음의 상당부분이 컴프레서 쉘의 진동에 의해 방사되는 소음이다. 본 연구에서는 컴프레서 쉘의 동특성을 규명하기 위하여 범용 구조해석 패키지인 MSC/NASTRAN을 이용하여 컴프레서 쉘을 여러 분계로 분리하여 해석한 뒤, 부분구조 합성법을 이용하여 전계의 동특성을 규명하였다. 그리고 각 분계의 변형 에너지와 운동에너지를 산정하여 각 분계가 전계에 기여하는 정도를 파악하였다. 컴프레서 소음에 가장 높은 영향을 미치는 1차모드를 고주파로 이동시키기 위하여, 1차 모드에 기여가 높은 분계의 질량과 강성을 변경하여 컴프레서 쉘의 동특성 개선 방향을 제시하였다.

• 한국환경과학회지
• /
• 제30권8호
• /
• pp.703-708
• /
• 2021

To improve the environmental management and resources, in this study, we aimed to investigate the effect of adding oyster shell powder to Hanwoo manure on its characteristics and microbial composition during the storage period. Additives were deposited on top of the manure surface at the rate of 0, 0.5, and 1% of oyster shell powder per 200 g of Hanwoo manure in a plastic container with three replicates; however, untreated manure litter served as the control. Manure characteristics (dry matter, organic matter and crude ash) and microbial composition (lactic acid bacteria, yeast, Bacillus subtilis, Salmonella, and E.coli) were evaluated at day 0, 2, 4, and 8. Manure characteristics exhibited an effect on dry matter, organic matter, and crude ash at day 2 and 8 (p<0.05), and not for day 0 and 4 (p>0.05). With the exception of yeast content at day 4 of storage, lactic acid bacteria, yeast, Bacillus subtilis, Salmonella, and E.coli exhibited no significant differences in all conditions during the storage period. Conclusively, addition of 1% oyster shell powder to Hanwoo manure resulted in slightly better manure characteristics; however, its microbial composition remained unchanged.

• 대한의용생체공학회:의공학회지
• /
• 제31권4호
• /
• pp.321-327
• /
• 2010

Most of the ear shells of hearing aids are manufactured manually, and it is one of the reasons that the cost of the custom-made hearing aids can be increased. Thus it is required to manufacture the ready-made ear shell for the purpose of easy manufacturing and decrease in cost. In this study, we extract parameters in order to manufacture the ready-made ear shell for CIC type hearing aids and simulate to reconstruct the ear shell using the extracted parameters. To parameter extraction, we set up the eleven parameters for the ready-made ear shell based on anatomical characteristics of the ear canal, and we found values of the parameters from twenty-one impressions in their 20s and twelve impressions in their 60s using aperture detection and feature detection algorithms. Classifying the parameters by size, we also determine the parameters of ready-made ear shell into three types for people in their 20s and two types for people in their 60s. Each ready-made ear shell was simulated to reconstruct using figured parameters, and evaluated the rate of agreement with unused impressions for setting parameters. To evaluate the ready-made ear shell, we calculate the volume ratio and intersection between of the each impression and ready-made ear shell, and the intersection ratio using the intersection volume and ready-made ear shell volume. As a result, the volume ratio was about 70%, and volume match ratio was also up to 70%. It means that the ready-made ear shell we simulated is the significantly matched to impression.

• Elastomers and Composites
• /
• 제37권1호
• /
• pp.21-30
• /
• 2002

개시제 ammonium persulfate(APS)와 유화제 sodium dodecyl benzene sulfonate(SDBS)를 이용하여 methyl methacrylate(MMA), styrene(St), ethyl acrylate(EA)등의 단량체를 core(내부)와 shell(외부)의 폴리머성분이 다른 core-shell 폴리머를 합성하고 각 core-shell 폴리머에 대한 구조를 연구하였다. 한 입자의 내부와 외부의 고분자 조성이 다른 composite 라텍스는 고분자 블렌딩과 공중합의 물성과는 달리 한 입자 내에서도 상반된 두 가지 물성을 동시에 나타내는 특성으로 인하여 여러 산업 분야에 응용이 가능하다. 그러나, core-shell 라텍스를 제조할 때 반응중입자가 성장하는 과정에서 입자의 응집과 중합율이 떨어지고, 라텍스의 응용시 기계적 안정성이 문제점으로 되고 있다. 따라서 shell 중합시에 새로운 입자의 생성이 적고 중합중 안정성이 우수한 라텍스를 제조하기 위해 유화제농도, 개시제농도, 중합온도가 PMMA/PSt과 PSt/PMMA의 core-shell 구조에 미치는 영향과 중합 후 입도분석기(particle size analyzer; PSA) 및 투과전자현미경(transmission electron microscope; TEM)을 이용하여 실제 입자측정과 입자형태 특성을 확인하였으며 시차주사열량계(differential scanning calorimeter, DSC)를 이용하여 유리전이온도($T_g$)의 측정, 최저성막온도(minimum film formation temperature; MFFT), NaOH 첨가에 의한 가수 분해에 따르는 pH를 측정하여 core-shell의 새로운 특성을 확인하였다.

• 동력기계공학회지
• /
• 제17권3호
• /
• pp.28-34
• /
• 2013

This study is experimentally performed for using the oyster shell as a desiccant in the fluidized bed with bundle of heating pipe. The test material is oyster shell from fishery wastes which can use without costs. The main parameters of experiment are inlet air temperature, velocity of inlet air and heat flux of heating pipes. Also the geometry of heating pipe is treated as important parameter. From this study, the effect of inlet air temperature and input heat flux have much affect to increase the heat and mass transfer. On the other hand, the effect of inlet air velocity has less affect to increase the heat and mass transfer. And it is clarified that the oyster shell has sufficient probability for using as a desiccant in air-conditioning system.

• 대한기계학회논문집A
• /
• 제23권11호
• /
• pp.2040-2049
• /
• 1999

The Rayleigh-Ritz method is used to investigate the natural frequencies and mode shapes of the ring stiffened cylindrical shells with a rectangular cutout. The cutout is located on the center of the shell. The Love's thin shell theory combined with the discrete stiffener theory is adopted to formulate the analytical model of the shell. The effect of stiffener eccentricity, number, and position on vibration characteristics of the shell is examined. Also the effect of cutout size is examined. By comparison with previously published analytical and new FEM results, it is shown that natural frequencies and mode shapes can be determined with adequate accuracy.

• 한국공작기계학회논문집
• /
• 제17권1호
• /
• pp.150-157
• /
• 2008

Bellows are commonly used in piping systems to absorb expansion and contraction in order to reduce stress. Unlike most piping components, bellows consist of a thin-walled shell of revolution with a corrugated meridian, in order to provide the flexibility needed to absorb mechanical movements. It is a composite shell structure consisting of at least one toroidal shell, an annular plate or conical shell. It is difficult to analyze the behavior of bellows because of its complex geometry. Simplified formulas for variable mechanical behaviors of bellows are provided by a standard called EJMA. An automatic design software for bellows is programming by using VBA(Visual Basic for Application) based on EJMA. Bellows engineers can effectively make a decision for bellows geometries because this software provides graphically design results in its post-processor. Bellows design software is expected to give quite a good guidance to practical design. The characteristics of bellows are also investigated through the automatic design process in bellows design software.

• Advances in Computational Design
• /
• 제5권4호
• /
• pp.349-362
• /
• 2020

Dynamic characteristics of a scale-dependent porous metal foam cylindrical shell under a traveling load have been explored within this article based on a numerical approach. Within the material texture of the metal foams, uniform and non-uniform porosities may be dispersed. Based upon differential quadrature method (DQM) and Laplace transforms, the equations of motion for a shear deformable scale-dependent shell may be solved numerically. Scale-dependent shell modeling has been provided based upon strain gradient elasticity. Solving the equations will give the shell deflection as a function of load speed. Also, it is reported that shell deflection relies on the porosity dispersion and strain gradient influences.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2334-2343
• /
• 2000

This paper proposes an efficient beam-shell modeling technique for the free vibration analysis of a T-joint thin-walled beam structure. Except a small portion of a T-joint which is modeled by shell elements, the structure is modeled by thin-walled beam elements that can describe warping and distortion. In order to match the shell and thin-walled beam elements at the interface of the dissimilar elements, a technique based on a pseudo inverse matrix is formulated. This paper also examines the role of the thin-walled element taking into account the distortion and warping deformation degrees of freedom in predicting accurately the dynamic characteristics of a T-joint thin-walled structure.