• 한국지반공학회논문집
• /
• 제34권2호
• /
• pp.55-63
• /
• 2018

열차의 하중을 적절한 강성으로 지지하기 위하여 다짐시공된 노반의 효과적인 강성특성 평가 기법에 대한 연구가 요구된다. 본 연구에서는 상부노반에 대하여 크로스홀 형태의 동적 콘 관입기(CDCP)를 적용함으로써 심도에 따른 강성특성을 평가하고자 하였다. CDCP의 적용을 위하여 세 단면의 다짐시공 완료된 상부노반이 대상 현장으로 선택되었으며, 각각의 개소에 대하여 CDCP 관입실험 및 들밀도시험, 동평판재하시험(LFWD)이 수행되었다. CDCP 관입실험 결과, 심도에 따른 탄성파 발신시간 및 전단파 수신시간을 획득하였으며, 이를 이용하여 노반의 전단파속도 주상도를 획득하였다. 또한, 동일 개소에서 들밀도시험으로부터 획득한 노반의 밀도 및 전단파속도 주상도를 이용하여 심도에 따른 최대전단강성계수($G_{max}$)를 평가할 수 있었다. CDCP 관입실험 및 들밀도시험으로부터 평가된 최대전단강성계수와 LFWD시험으로부터 획득한 동탄성계수($E_{vd}$)를 상호비교한 결과 매우 우수한 선형관계를 보이므로, CDCP 관입실험으로부터 유효한 강성특성을 평가할 수 있을 것이라 판단되었다. 또한, CDCP 관입실험으로부터 도출되는 결과는 일정 심도에 대한 대표 강성특성이 아닌 심도에 따른 연속적인 강성특성 이므로 노반의 강성특성 평가에 효과적으로 이용될 수 있을 것이라 기대된다.

• 한국공작기계학회논문집
• /
• 제12권2호
• /
• pp.23-30
• /
• 2003

It is very important to detect and evaluate the surface or subsurface flaws because of their influences on mechanical properties of materials. Rayleigh wave and creeping wave are commonly used for the detection of surface and subsurface flaws. These techniques, however, have following problems. Each amplitudes are remarkably affected by the surface condition and evaluation of echo pattern is usually difficult because shear wave mode propagate in the material at the same time. On the other hand, surface SH-wave which is horizontally polarized shear wave traveling along near surface layer is an attractive technique for the surface or subsurface material characterization and this technique is useful to solve the problems mentioned above. In this paper, The stability and transmission coefficient of SH waves through a viscous fluid layer is theoretically studied and simulated. Its results agreed well with the theoretical expectation for the experimental verification. These experimental results show that viscosity of couplants, thickness of couplant and surface roughness are closely related to transfer efficiency in surface SH angle beam method.

• 비파괴검사학회지
• /
• 제31권3호
• /
• pp.278-286
• /
• 2011

The on-line monitoring for the wall thinning in secondary system has been considered one of main issues for the safety of nuclear power plants. To establish the on-line monitoring technique for the pipe wall thinning, the development of the ultrasonic transducer working in high-temperature is very important. In this investigation, the magnetostrictive transducer is concerned for high temperature condition up to $300^{\circ}C$. The magnetostrictive transducer has many advantages such as high working temperature, durability, cost-effectiveness, and shear waves, most of all. A thin Fe-Co alloy patch whose Curie temperature is over $900^{\circ}C$ was employed as a ferromagnetic material for magnetostriction. Wave transduction experiments in various temperature were carried out and the effect of bias magnets was considered together with the dry coupling performance of the transducer. From experimental results, consequently, it was found that the magnetostrictive transducer works stable even in high temperature up to $300^{\circ}C$ and can be a promising method for the on-line monitoring of the wall thinning in nuclear power plants.

• Journal of Advanced Research in Ocean Engineering
• /
• 제3권2호
• /
• pp.53-58
• /
• 2017

This study introduces the case of pipelines installed in subsea conditions and buried offshore. Such installations generate pore water pressure under the seabed because of cyclic wave excitation, which is an environmental load, and consistent cyclic wave loading that reduce the soil shear strength of the seabed, possibly leading to liquefaction. Therefore, in view of the liquefaction of the seabed, stability of the subsea pipelines should be examined via calculations using a simple method for buried subsea pipelines and floating structures. Particularly, for studying the possible liquefaction of the seabed in regard to subsea pipelines, high waves of a 10- and 100-year period and the number of occurrences that are affected by the environment within a division cycle of 90 s should be applied. However, when applying significant wave heights (HS), the number of occurrences within a division cycle of 3 h are required to be considered. Furthermore, to research whether dynamic vertical load affect the seabed, mostly a linear wave is used; this is particularly necessary to apply for considering the liquefaction of the seabed in the case of pile structure or subsea pipeline installation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.448-456
• /
• 2010

The mechanical behavior of granular soils is affected by particle bonding including natural cementation. This study addresses a simple model of small strain stiffness and salt concentration based on wave measurements of salt-cemented particulate media. Published models of artificially cemented soils with different curing methods and several types of cementation agents are reviewed. Glass beads with the median diameter of D50 = 0.5mm are prepared in rectangular cells using the water-pluviated method in salt water with different concentrations. Piezo disk elements and bender elements embedded in the cell are used for the measurements of compressional and shear waves. The relationships between elastic wave velocities and salt concentration show an exponential function. The measured small strain stiffness matches well the predicted small strain stiffness based on micromechanics for simple cubic monosized sphere particles. This study demonstrates that the salt concentration in salt-cemented specimen may be evaluated by using elastic wave velocities.

• 한국지반공학회논문집
• /
• 제19권1호
• /
• pp.229-236
• /
• 2003

본 연구에서는 우란바톨(Ulanbator)에서 북경(Beijing)사이의 지역에서 샘플링한 동결된 응회암 풍화토의 동적 특성을 규명하기 위해 풍화토와, 글래스비드(glass bead)를 대상으로 온도변화에 따른 초음파 속도를 sing-around 법을 사용하여 측정하였다. 본 실험을 통해 초음파 속도는 온도가 증가함에 따라 감소하였고 초음파 속도와 부동수분 사이에는 선형적인 관계가 존재함을 확인하였다. 또한 동결토의 초음파 실험결과, 종파가 시료의 종류에 크게 영향을 받지 않기 때문에 부동수분과 초음파 속도와의 관계규명에 적합하다고 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.308-319
• /
• 2005

Piezo-ceramics are special materials which transform energy between mechanical and electrical forms. Bender-elements are composite materials consisting of thin piezo-ceramics and elastic shims, and are widely used as actuators and transducers in the field of electronics, robotics, autos and mechatronics utilizing the effectiveness of energy transformation capability. In geotechnical engineering, commercial bender-elements are used in laboratory as source and receiver in the measurements of soil stiffness. The elements were built by using various metal shims sandwiched between piezo-ceramics and coating over the composite in the research. A pair of elements were buried in a concrete block and used as source and receiver to measure the stiffness of the concrete. The test results were verified by comparing with the resonant column testing results. In a preliminary stage of the development of an in-situ seismic testing equipment using bender-elements for soft clay materials, shear waves were generated and measured by burying the elements in the barrel of kaolinite and water mixture. The measured shear wave signals were so distinct for the first-arrival pick that applicability of the elements in the field measurements is very promising.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 추계 학술대회논문집
• /
• pp.187-193
• /
• 2007

The flight vehicles have cavities such as wheel wells and bomb bays. The flow around a cavity is characterized as unsteady flow because of the formation and dissipation of vortices due to the interaction between the freestream shear layer and cavity internal flow, the generation of shock and expansion waves. Resonance phenomena can damage the structures around the cavity and negatively affect aerodynamic performance and stability. In the present study, numerical analysis was performed for cavity flows by the unsteady compressible three dimensional Reynolds-Averaged Navier-Stokes (RANS) equations with Wilcox's ${\kappa}\;-\;{\omega}$ turbulence model. The cavity has the aspect ratios of 2.5, 3.5 and 4.5 for two-dimensional case, same aspect ratios with the W/D ratio of 2 for three-dimensional case. The Mach and Reynolds numbers are 0.53 and 1,600,000 respectively. The flow field is observed to oscillate in the "shear layer mode" with a feedback mechanism. Based on the SPL(Sound Pressure Level) analysis of the pressure variation at the cavity trailing edge, the dominant frequency was analyzed and compared with the results of Rossiter's formula. The MPI(Message Passing Interface) parallelized code was used for calculations by PC-cluster.

• 한국철도학회논문집
• /
• 제13권4호
• /
• pp.440-446
• /
• 2010

본 논문은 적층고무받침을 이용하여 지진으로부터 교량의 손상피해를 줄이기 위한 연구이다. 적층고무 받침은 지진 발생시 변위를 증가시키고, 주기를 길게하여 하중을 전환시킨다. 적층고무받침과 같은 면진장치에 몇 가지 지진파를 가진하여 진동대 실험을 하였다. 이 실험에서는 가속도계와 하중계, 변위계를 설치하여 상판의 가속도 및 전단력 등을 측정하였다. 더구나 적층고무받침을 설치한 경우와 지진격리장치를 설치하지 않은 경우로 구분하여 진동대 실험하여 그 성능을 비교 평가하였다. 실험결과 상판의 가속도 및 전단력은 적층고무받침을 사용할 경우 응답이 감소하였다.

• 대한화학회지
• /
• 제39권1호
• /
• pp.14-22
• /
• 1995

주어진 시간에 금속 고체 내부의 목표 부위에 탄성에너지를 집중시킬 수 있도록 표면에 가해주는 최적의 레이저 pulse의 형태를 디자인 하는 문제에 관하여 연구하였다. 금속고체 표면에 레이저를 쪼여주면 흡수된 광에너지가 열로 바뀌어 열팽창에 의하여 종파와 횡파가 고체 내부로 전파된다. 최소의 레이저의 세기를 사용하고 다른 부위에 영향을 최소화하면서 목표 부위에 원하는 에너지를 집중시킬 수 있는 최적의 레이저 펄스의 형태를 공액 변화 방법과 반 공간 Green 함수를 이용한 유한 요소법으로 조사하였다. 최적의 레이저 펄스로부터 원하는 시간에 목표 부위에 탄성에너지를 집중시키는 것을 보여주었고 또한 대부분의 에너지가 방향성이 큰 횡파로부터 온다는 것을 알았다.