• 제목/요약/키워드: Shear thickening fluid

검색결과 22건 처리시간 0.021초

전단농화 유체가 함침된 케블라 방탄재의 충돌 성능해석 (Collision Performance Analysis of Kevlar Bulletproof Material Impregnated with Shear Thickening Fluid)

  • 조희근
    • 한국기계가공학회지
    • /
    • 제16권6호
    • /
    • pp.21-28
    • /
    • 2017
  • This study investigated Kevlar fabric impregnated with shear thickening fluid (STF). The STF performance was assessed by comparing bullet-proof characteristics of STF impregnated and pure Kevlar material. The analysis employed a circular steel ball as the nominal warhead, and bulletproof characteristics were evaluated by the warhead residual velocity. Various initial velocity conditions were employed, with different bulletproof characteristics apparent for each velocity region. The results of this study provide effective data for future bulletproof material design and application.

전단농화유체를 함침한 케블라 직물의 저속충격 거동 및 마찰특성 연구 (A Study on the Low Speed Impact Response and Frictional Characteristics of Shear Thickening Fluid Impregnated Kevlar Fabrics)

  • 이복원;이성현;김천곤;윤병일;백종규
    • Composites Research
    • /
    • 제21권2호
    • /
    • pp.15-24
    • /
    • 2008
  • 본 연구에서는 Kevlar 직물에 전단농화 특성을 갖는 나노 실리카 입자를 함침시켜 저속충격 특성 및 마찰특성 실험을 수행하였다. 나노입자의 크기에 따른 영향력을 평가하기 위해 100nm, 300nm, 500nm 직경크기의 구형 실리카 입자를 충진한 전단농화유체를 제작하였으며 유변물성 시험을 통해 전단담화 현상 및 급격히 점성이 증가하는 전단농화현상을 확인하였다. 전단농화유체를 Kevlar 직물에 함침시켜 저속 낙하 충격시험을 수행한 결과 나노입자 처리를 한 Kevlar 직물에서 우수한 충격흡수 특성을 보였으며 특히 함침된 나노입자의 크기가 작을수록 충격흡수양이 증가하였고 변형의 양도 가장 적게 나타났다. Kevlar 직물 내에서의 얀의 Pull-out 실험과 직물간 마찰력 실험을 통해 나노입자의 크기가 작을수록 전단농화 현상으로 인한 마찰력의 증가가 더욱 크게 나타남을 확인하였다. 이러한 마찰력의 증가가 얀의 Pull-out 에너지를 증가시키게 되어 주요 충격흡수 메커니즘으로 작용하게 되는 것이다.

발파전색재료 및 플러그 장치의 발파효과 검증 연구 (The Study on the Verification of the Blasting Effect of Blast Stemming Material and Plug Device)

  • 고영훈
    • 터널과지하공간
    • /
    • 제32권4호
    • /
    • pp.272-284
    • /
    • 2022
  • 본 연구에서는 개발 중인 전단농화유체(shear thickening fluid) 기반의 발파전색재료와 밀폐 플러그 장치의 효과를 평가하기 위하여 터널발파를 수행하였다. SAV-Cut공법을 적용하고 있는 터널현장에 STF 단일전색 및 STF 전색재를 플러그와 결합하여 적용하였고, 기존 방식의 모래전색을 적용한 케이스와 굴진율 및 파쇄입도를 비교하였다. 터널 굴진율은 3차원 레이저 스캐너를 이용하여 평가하였다. STF 전색재료와 STF 전색재료에 플러그를 결합한 경우 모래전색 대비 각 5.7, 5.36% 정도 굴진율이 향상되는 것을 확인하였다. 파쇄입도의 경우 STF 전색재료를 적용하였을 경우 가장 좋게 나타났으며, 모래 전색케이스와 비교하였을 때 약 61% 파쇄입도가 감소하였다. 그러나 플러그 장치적용에 따른 뚜렷한 발파 효과 향상은 관찰되지 않았다.

Herschel-Bulkley 모델에 의한 전기 및 자기장 유체 댐퍼의 준안정 상태 댐핑력 해석 (Quasi-Steady Damping Force of Electro- and magneto-Rheo logical Flow Mode Dampers using Herschel-Bulkley Model)

  • 이덕영;황우석
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 춘계학술대회논문집
    • /
    • pp.1298-1302
    • /
    • 2000
  • Electrorheological(HER) and magnetorheologica(MR) fluids have a unique ability to increase the dynamic yield stress of the fluid substantially when electric or magnetic field is applied. ER and MR fluid-based dampers are typically analyzed using Bingham-plastic shear flow analysis under Quasi-steady fully developed flow conditions. An alternative perspective, supported by measurements reported in the literature, is to allow for post-yield shear thinning and shear thickening. To model these, the constant post-yield plastic viscosity in Bingham model can be replaced with a power-law model dependent on shear strain rate that is known as the Herschel-Bulkley fluid model. The objective of this paper is to predict the damping forces analytically in a typical ER bypass damper for variable electric field, or yield stress using Herschel-Bulkley analysis.

  • PDF

전단농화유체가 함침된 Kevlar 직물의 방검 및 방침 특성 (Puncture and Cutting Resistance Characteristics of Shear Thickening Fluid Impregnated Kevlar Fabrics)

  • 이복원;김일진;이연관;김천곤;윤병일;백종규
    • Composites Research
    • /
    • 제21권5호
    • /
    • pp.23-30
    • /
    • 2008
  • 칼이나 송곳 같이 날카로운 날이 있거나 같이 뽀족한 도구를 사용한 위협을 군인 뿐 아니라 경찰이나 경호원들에게 쉽게 일어날 수 있다. 이러한 위협으로부터 보호하기 위한 방호복의 소재의 적용하기 위해 방탄소재로 사용되는 Kevlar 직물을 사용하였으며 방검 및 방침 특성 향상을 위해 나노입자가 충진된 전단농화유체(Shear thickening fluid)를 함침하였다. National Institute of Justice 시험 격에 따라 송곳과 칼을 제작하여 낙하충격시험기를 사용한 방검 및 방침특성 평가시험을 수행하였다. 전단농화유체는 각각 100nm, 300nm, 500nm 기의 구형 나노 $SiO_2$ 입자를 충진시켜 제작하였으며 전단농화유체의 함침과 나노 입자의 크기가 갖는 방검 및 방침 특성에 대한 영향력을 평가하였다. STF를 함침한 Kevlar 직물은 송곳을 사용한 낙하충격시험에서는 미처리 직물에 비해 좀 더 높은 충격하중을 지지하며 견고히 송곳의 침투에 저항하는 우수한 방침 특성을 보여준 반면 칼을 사용한 방검시험에서는 효과를 보여주지 못하였다. 특히 전단농화유체를 구성하는 나노입자의 크기는 방침 특성을 결정하는 주요한 인자임을 확인하였다.

유동 모드 댐퍼에서의 Herschel-Bulkley 모델의 유용한 해법 (Useful Guide to Solve Herschel-Bulkley Model in a Flow Mode Damper)

  • 이덕영;박성태
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2003년도 추계학술대회논문집
    • /
    • pp.784-787
    • /
    • 2003
  • Electrorheological(ER) and magnetorheological(MR) fluid-based dampers are typically analyzed using Bingham-plastic shear model under quasi-steady fully developed flow conditions. A Herschel-Bulkley constitutive shear flow relationship is that the linear shear stress vs. strain rate behavior of Bingham model is replaced by a shear stress that is assumed to be proportional to a power law of shear rate. This power is called the flow behavior index. Depending on the value of the flow behavior index number, varying degrees of post-yield shear thickening or thinning behavior can be analyzed. But it is not practical to analyze the damping force in a flow mode damper using Herschel-Bulkley model because it is needed to solve a polynomial equation. A useful guide is suggested to analyze the damping force in a damper using the Herschel-Bulkley model.

  • PDF

쉘요소를 활용한 STF 함침된 Kevlar Fabric의 방탄해석 (Collision Analysis of STF Impregnated Kevlar Fabric Using the 3D-Shell Element)

  • 이덕규;박종규;정의경;이만영;김시조;문상호;손권중;조희근
    • Composites Research
    • /
    • 제29권1호
    • /
    • pp.24-32
    • /
    • 2016
  • 본 연구에서는 3D 아이소파라메트릭 쉘요소 모델을 사용하여 전단농화유체(STF: shear thickening fluid)가 함침된 케블라 페브릭(Kevlar fabric) 복합재의 방탄성능에 대하여 해석을 수행하였다. 다양한 적층복합재(12, 18, 20, 24-layer)를 대상으로 탄두 초기속도에 따른 충돌 후 속도(Residual velocity)를 측정하여 실험치와 비교하였다. SFT가 함침된 복합재의 방탄 성능의 효과를 검증하기 위하여 다양한 속도영역에서 STF가 함침된 것과 함침 되지 않은 것의 방탄성능을 비교하였다. STF가 함침된 케블라 페브릭은 450 m/s 이하의 저속에서는 비교적 큰 마찰효과를 일으키며 고속에서는 STF가 함침된 Kevlar fabric의 마찰효과는 기대할 수 없는 수준으로 오히려 역효과를 일으키는 것을 확인할 수 있었다. 연구를 통해 STF가 함침된 케블라 페브릭의 특성을 퇴화 3D 쉘 요소를 사용하여 효과적으로 모사할 수 있었으며, 실험 치와의 결과 비교를 통하여 그 유효성을 검증하였다.

미세입자분산 고분자 현탁액의 3차원 직접수치해석 (DIRECT NUMERICAL SIMULATION OF PARTICLE SUSPENSIONS IN A POLYMERIC LIQUID)

  • 황욱렬
    • 한국전산유체공학회지
    • /
    • 제14권4호
    • /
    • pp.101-108
    • /
    • 2009
  • We present a new finite-element scheme for direct numerical simulation of particle suspensions in simple shear flow of a viscoelastic fluid in 3D. The sliding tri-periodic representative cell concept has been combined with DEVSS/DG finite element scheme by introducing constraint equations along the domain boundary. Rigid body motion of the freely suspended particle is described by the rigid-shell description and implemented by Lagrangian multipliers on particle boundaries. We present the bulk rheology of suspensions through the numerical examples of single-, two- and many-particle problems, which represent a large number of such systems in simple shear flow. We report the steady bulk viscosity and the first normal stress coefficient, which show shear-thickening behavior for both properties.

고속충격 반응형 스마트유체 전색재료를 적용한 실 규모 발파실험 및 현장실증 연구 (Full-Scale Blasting Experiment and Field Verification Research Using Shock-Reactive Smart Fluid Stemming Materials)

  • 고영훈;서승환;정영준;노상림;조상호;정문경
    • 화약ㆍ발파
    • /
    • 제41권1호
    • /
    • pp.1-18
    • /
    • 2023
  • 전색작업은 발파공 내에서 폭발가스가 쉽게 유출되지 않게 적용되는 중요한 과정이다. 전색물질은 폭발 에너지를 더 길게 공 내부에서 작용할 수 있게 하며, 암석의 파쇄도를 증가시키는데 큰 도움이 된다. 본 연구에서는 동적 충격에 반응하는 전단농화유체 기반의 전색물질을 개발하였다. 전단농화유체 기반의 전색재료의 성능을 검증하기 위해 실 규모 발파실험 및 터널현장에 대한 현장 실증을 수행하였다. 첫 번째 실험에서는 전색재료 적용에 따른 발파공 내부의 압력을 직접 측정하였고, 도심지 터널현장 실증에서는 모래전색과 전단농화유체 기반 전색재료의 발파결과를 서로 비교하였다. 발파공 내 압력측정 결과 본 연구를 통해 개발한 전색물질을 적용한 경우, 발파공 상부에서 측정된 압력이 일반적인 모래전색을 적용한 경우보다 낮았으며 폭발가스 분출량도 적었다. 또한 현장 실증결과 터널발파에서 개발전색물질의 굴착성능이 모래전색 발파의 경우보다 우수함을 검증할 수 있었다.

협 부가 있는 동맥 내부에서의 맥동유동 (Pulsatile Flow in the Artery with Stenosis)

  • 손정락;주상우;서상호;심은보
    • 대한기계학회논문집B
    • /
    • 제26권1호
    • /
    • pp.39-44
    • /
    • 2002
  • The arterial stenosis related to the intimal thickening of the arterial wall is the main cause of many diseases in human cardiovascular system. Hemodynamic behavior of the blood flow is influenced by the presence of the arterial stenosis. In this study, effects of the pulsatile flow, caused by the periodic motion of the heart, on the blood flow and its interaction with the arterial stenosis are analyzed by the FEM-based computational fluid dynamics. As a result, it was found that the characteristics of the pulsatile flow in the artery with stenosis are quite different from those of the steady flow. And, the pulsatile flow condition affects the wall shear stress, which is one of the most important physiological parameters in the hemodynamics.