• Title/Summary/Keyword: Shear Center

Search Result 1,168, Processing Time 0.031 seconds

Chemical Structure of Ozonized Waste Cooking Oil and Wood Bonding Strengths of Reaction Products with pMD (오존 처리한 폐식용유의 화학구조와 pMDI로 제조한 접착제의 목재 접착강도)

  • Kang, Chan-Young;Lee, Eung-Su;Ryu, Jae-Yun;Lee, Hyun-Jong;Seo, Jun-Won;Park, Heon
    • Journal of the Korean Wood Science and Technology
    • /
    • v.38 no.4
    • /
    • pp.316-322
    • /
    • 2010
  • The research attempted to develop a wood adhesive based on waste cooking oil, using ozonification technology for the chemical structure modification. The waste cooking oil (WCO) was reacted with $O_3$ for different times; 1 h, 2 h, and 3 h. The chemical structure modifications of the ozonized WCOs were examined by Fourier transform Infrared (FT-IR) spectrum. The FT-IR spectrum of WCO had an absorbance peak at 3,010 $cm^{-1}$ that was the characteristic peak of the unsaturated double bonds. As ozone treatment time increased, the peak of the double bond was disappeared and carboxyl peak appeared at 1,700 $cm^{-1}$. Especially, the double bond of 3 hrs-ozonized WCO was vanished almost. In results of the dry bonding strengths of the 3 hrs-ozonized WCO mixed with polymeric methylene diphenyl diisocyanate (pMDI) were the strengths of weight ratio of 3hrs-ozonized WCO : pMDI, 1 : 0.5, 8.08 kgf/$cm^2$, 1 : 0.75, 9.53 kgf/$cm^2$ 1 : 1, 44.16 kgf/$cm^2$, 1 : 2, 58.08 kgf/$cm^2$, 1 : 3, 61.41 kgf/$cm^2$, and 1 : 4, 46.95 kgf/$cm^2$. Therefore, it was found that the optimum equivalent ratio was formed at the ratio of 1 : 2 or 1 : 3. Under wetting the bonding strength of 1 : 3 ratio was appeared higher than that of 1 : 2 ratio, while the results obtained from hot-water and cyclic boiling shear test were similar.

Estimation of the Freshwater Advection Speed by Improvement of ADCP Post-Processing Method Near the Surface at the Yeongsan Estuary (ADCP 표층유속 자료처리방법 개선을 통한 영산강 하구 표층 방류수 이류속도 산정)

  • Shin, Hyun-Jung;Kang, Kiryong;Lee, Guan-Hong
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.19 no.3
    • /
    • pp.180-190
    • /
    • 2014
  • It has been customary to exclude top 10-20% of velocity profiles in the Acoustic Doppler Current Profiler (ADCP) measurement due to side lobe effects at the boundary. To better understand the mixing in the Yeongsan estuary, the freshwater advection speed (FAS) was recovered from highly contaminated ADCP data near the surface. The velocity profiles were measured by using ADCP at two stations in the Yeongsan estuary during August 2011: one was located in front of the Yeongsan estuarine dam and the other was deployed near Goha Island. The FAS was recovered from the ADCP data set by applying rigorous post-processing methods and compared with the sediment advection speed (SAS). The SAS was determined by the peak time difference of suspended sediment concentration between two stations in the channel, divided by the distance of two stations. The FAS and the SAS showed very similar value when the freshwater discharge was greater than $2.0{\times}10^7$ ton and the SAS was a bit greater when the freshwater discharge was smaller. Since the FAS was on average about 0.8 m/s greater than the velocity at 0.8 of water depth from the bottom, the net discharge, estimated with recovered FAS and integrated over water depth and tidal cycle, was directed seaward during the high discharge contrary to the onshore direction of the net discharge estimated with 0.8 of water depth from the bottom. Moreover, the velocity shear and Richardson number changed when the FAS was used. Thus, the importance of the true FAS is appreciated in the investigation of the surface layer stability. If currents, temperature and salinity were observed for longer time in the future, it could be possible to more accurately understand the formation and decay of stratification as well as the suspended sediment transport processes.

Comparison of Chemical, Physical and Sensory Traits of Longissimus Lumborum Hanwoo Beef and Australian Wagyu Beef (한우고기 및 호주산 Wagyu 쇠고기 채끝육의 이화학특성과 관능특성)

  • Lee, Jong-Moon;Kim, Tae-Woo;Kim, Jin-Hyong;Cho, Soo-Hyun;Seong, Pil-Nam;Jung, Meyung-Ok;Cho, Yong-Min;Park, Beom-Young;Kim, Dong-Hun
    • Food Science of Animal Resources
    • /
    • v.29 no.1
    • /
    • pp.91-98
    • /
    • 2009
  • The objective of this research was to evaluate the chemico-physical and sensory traits of Hanwoo beef quality grade $1^{++}$ ($HW1^{++}$), grade $1^+$ ($HW1^+$), grade 1 (HW1), and Australian Wagyu (AUW) beef. The Longissimus Lumborum (LL) of $HW1^{++}$ beef had the lowest (p<0.05) moisture contents (54.07%) while it had the highest (p<0.05) CIE L, a, b value and water holding capacity (WHC). Fat contents of LL were significantly different (p<0.05) among the beef groups: $HW1^{++}$ (25.58%), $HW1^+$ (16.39%), HW1 (11.29%), and AUW (11.87%) beef. Warner-Bratzler shear force (WBSF) values were the lowest in the beef from AUW (2.81 kg) beef. Cooking loss of AUW beef had the highest value (23.77%) among the beef groups. Quality grade affected sensory traits, with $HW1^{++}$ receiving highest (p<0.05) tenderness, juiciness and flavor. In Hanwoo beef, from grade 1 to $grade1^{++}$, there were significant increases in fat content (from 11.29% to 25.58%), CIE L value (37.56 to 43.15), WHC (55.97% to 60.05%), tenderness (4.63 to 5.28), and decreases in moisture contents (66.84% to 54.07%), protein contents (20.35 to 19.76%), and WBSF value (5.43 kg to 2.93 kg) value. In sensory evaluation, overall acceptability score for Hanwoo $1^{++}$ grade beef was significantly higher than for Australian Wagyu beef. However, there were no significant differences in sensory properties between Hanwoo 1, $1^+$ grade and Australian Wagyu beef.

Quality Characteristics of Low-fat Emulsified Sausage Containing Tomatoes during Cold Storage (토마토가 함유된 저지방 유화형 소시지의 냉장 저장 중 품질 특성)

  • Hoe, Soon-Ku;Park, Ki-Hoon;Yang, Mi-Ra;Jeong, Ki-Jong;Kim, Dong-Hoon;Choi, Jine-Shang;Jin, Sang-Keun;Kim, Il-Suk
    • Food Science of Animal Resources
    • /
    • v.26 no.3
    • /
    • pp.297-305
    • /
    • 2006
  • This study was conducted to evaluate the quality characteristics of low-fat emulsion type sausages containing 0% tomato powder (C), 5.0% ground raw tomato paste (T1) and 0.5% freeze dried tomato powder (T2) during storage at $5{\pm}1^{\circ}C$ for 30 days. The crude protein content of T2 was significantly lower (p<0.05) than that of the other sausage types. Moisture, crude fat and crude ash contents of the sausages during storage were not affected by the addition of tomato. The pH and shear force ($kg/cm^2$) values of C were significantly higher (p<0.05) than those of T1 and T2. There was no significant difference among the different sausages in cooking loss, ranging from $13.00{\sim}14.98%$. The WHC values of T1 and T2 were significantly higher (p<0.05) than that of C. The values of TBARS were significantly (p<0.05) increased for ail sausages following storage. The TBARS value (mg MA/kg) of C was significantly higher (p<0.05) than those of T1 and T2 at 15 days of storage, however T1 was significantly higher (p<0.05) than the other sausages after 30 days of storage. The meat color values tended to decrease with increased storage time. Microorganism analysis revealed that all sausage types did not reach $4.4log_{10}CFU/g$ until 30 days of storage. The texture, brittleness, Hardness, and springiness of each sausage type were not significantly different after 1 day of storage, while the cohesiveness, gumminess and chewiness of T1 and T2 were significantly higher (p<0.05) than that of C. T1 and T2 sausages had a slightly higher score regarding color, aroma, tenderness and overall acceptability, however the sensory evaluation score among the different sausage types was not significantly different (p>0.05). In conclusion, low-fat sausage with added tomato showed higher lipid oxidative stability during storage than sausage to which no tomato was added.

Quality Characteristics of Fermented Pork with Korean Traditional Seasonings (한국 전통 양념을 이용한 발효 돼지고기의 품질 특성)

  • Jin, S.K.;Kim, C.W.;Lee, S.W.;Song, Y.M.;Kim, I.S.;Park, S.K.;Hah, K.H.;Bae, D.S.
    • Journal of Animal Science and Technology
    • /
    • v.46 no.2
    • /
    • pp.217-226
    • /
    • 2004
  • This study was canied out to evaluate the quality characteristics of the fermented pork with Korean traditional seasonings. The samples, outside muscle of pork ham were cut to cube(7 ${\times}$ 12 ${\times}$ 2cm) and five Korean traditional seasonings such as garlic paste(TI), pickled Kimchi(T2), pickled Kimchi juice(T3), soybean paste(T4), red pepper paste(T5) were seasoned by the proportions of meat to seasonings(1 : 1). The seasoned samples were fennented at - 1 ${\pm}$ 1$^{\circ}C$ for 20 days. According to proximate composition analysis, all pork samples contained protein 20 ${\sim}$ 22%, fat 3 ${\sim}$ 5%, moisture 64 ${\sim}$ 70% and ash 1.8 ${\sim}$ 2.0%. However, T5 had high crude fat level and relatively low moisture content. The highest pH among treatments was shown in TI whereas T3 showed the lowest. Water holding capacity(WHC) of T4 and T5 were higher, while those values were lower in T3 compared with other treatment. Shear force value was the highest in T5, while it was the lowest in T4. TBARS value of T3 was the highest, while that was the lowest in T4. Moreover the highest VBN value was observed in T4 due to fermentation of soy protein. However, the lowest VBN value shown in Tl indicated the inhibition of protein degradation by the garlic. The highest saccarinity was shown in T5 but it was the lowest of in T3. Salinity was shown to be high in T2 and low in T5. $L^*$ values of T4 was higher both at the surface and inner side of samples than the others but T5 showed the lowest value. T2 showed the highest $a^*$ value but T4 and T5 showed the lowest. In the result of sensory evaluation for cooked meat, T5 had the highest score in all item including overall acceptability, while T4 had the lowest score. Unsaturated fatty acid(UFA) ratio of T5 and n were 72.16 and 69.93 respectively, and the ratio of UFA/Saturated fatty acid(SFA) were higher in the order of T5 >T4> T3 >Tl >T2. Overall quality characteristics were higher in the order of T5 >T2 >Tl >T4 >T3.

Physico-chemical Changes of Pork Prepared by Korean Traditional Sauces During Chilled Aging (한국 전통 양념으로 제조한 돼지고기의 숙성중 물리화학적 변화)

  • Jin, S.K.;Kim, I.S.;Hur, S.J.;Lyou, H.J.;Hah, K.H.;Joo, S.T.;Lee, J.I.
    • Journal of Animal Science and Technology
    • /
    • v.46 no.5
    • /
    • pp.859-870
    • /
    • 2004
  • This study was conducted to investigate physico-chemical changes of pork prepared by Korean traditional 3 types seasoning such as soybean sauce(Tl); garlic sauce(T2); red pepper sauce(T3). The seasoned samples were aged at 0 ${\pm}$ $1^{\circ}C$ for 30 days. The results obtained were as follows; Salinity(%) and saccharinity(%) of sauce were significantly decreased(P<0.05) among the all treatments during aging periods, whereas fermented meats were significantly increased(P<0.05). pH of sauce and fermented meat were tended to increased as aging period. Water-Holding Capacity(WHC) and shear force of fermented meat increased(P<0.05) among the all treatments at 20 days of storage, and decreased after that period. In color, $L^* and b^* value of T3 were lower, while a^*$ value was higher than other treatments during aging period. Volatile Basic Nitrogen(YBN) value of all treatments were increased(P<0.05) after 20 days of storage. YBN value of T3 was significantly higher(P<0.05) compared with other treatments. Thiobarbituric Acid Reactive Substances(TBARS) was rapidly increased until 10 days of storage and somewhat decreased up to 20 days after 10 days in all treatments, it was re-increased after 20th days. T3 showed the highest TBARS among the all treatment groups. Total bacterial and Lactobacilli spp. were significantly increased(P<0.05) in all treatments at 10 days of storage and decreased after that period, however it tended to increased at 30 days of storage. In sensory evaluation, overall acceptability in all treatments were increased after 20 days of storage compared to initial storage and it score was similar thereafter.

Effect of Feeding Whole Crop Barley Silage- or Whole Crop Rye Silage based-TMR and Duration of TMR Feeding on Growth, Feed Cost and Meat Characteristics of Hanwoo Steers (청보리 사일리지 TMR 또는 청호밀 사일리지 TME 급여 및 급여기간이 거세 한우의 증체, 사료비 및 육질특성에 미치는 효과)

  • Jin, Guang Lin;Kim, Jong-Kyu;Qin, Wei-Ze;Jeong, Jun;Jang, Sun-Sik;Sohn, Yong-Suk;Choi, Chang-Won;Song, Man-Kang
    • Journal of Animal Science and Technology
    • /
    • v.54 no.2
    • /
    • pp.111-124
    • /
    • 2012
  • Feeding trial was conducted with 80 Hanwoo steers (7.5 months of age, 204.4 kg body weight) for 680 days from growing period to late fattening period to examine the feeding value of whole crop barley silage TMR (BS-TMR) and whole crop rye silage TMR (RS-TMR) on body gain, feed cost, slaughter characteristics and quality characteristics of $longissimus$ $dorsi$ muscle. Dietary treatments were conventional separate feeding of concentrate and rice straw (control), feeding BS TMR up to middle fattening period and same diet as for control during late fattening period (BS-TMR I), feeding BS-TMR for whole experimental period (BS-TMR II), feeding RS TMR up to middle fattening period and same diet as for control during late fattening period (RS-TMR I) and RS TMR for whole experimental period (RS-TMR II). Sixteen castrated calves were assigned to each treatment (4 pens, 4 heads per pen). Pens in each treatment were randomly distributed. Feeding both BS silage TMR and RS silage TMR slightly increased body gain of Hanwoo steers at the stages of growing and early fattening, and increased (P<0.0001) at middle fattening compared to feeding control diet while control diet tended to increase body gain at late fattening stage compared to feeding BS-TMR I, BS-TMR II and RS-TMR I diets. Total body gain was slightly increased in Hanwoo steers fed both I and II for BS and RS TMR compared to that in control diet. Feed cost per kg gain per head was relatively low in the Hanwoo steers fed silage TMRs to that fed control diet. Carcass weight, back fat thickness and $longissimus$ $dorsi$ area of Hanwoo steers tended to increase but lowered (P<0.047) yield index by feeding silage TMRs. Feeding BS TMR slightly decreased marbling score but no difference was found in the number of head over grade 1 between diets. Control diet tended to improve yield grade compared to silage TMRs. Chemical composition, water holding capacity, drip loss, cooking loss and pH, color and fatty acid composition of $longissimus$ $dorsi$ were not affected by experimental diets and feeding duration of silage TMRs. Shear force, however, was increased (P<0.046) by silage TMRs without difference between them compared to control diet. Based on the results of the current study, BS TMR and RS TMR could improve body gain and reduce feed cost without deteriorating meat quality compared to separate feeding of concentrate and rice straw. Overall feeding value was similar between BS TMR and RS TMR.

Occurrence and Chemical Composition of Ti-bearing Minerals from Samgwang Au-ag Deposit, Republic of Korea (삼광 금-은 광상에서 산출되는 함 티타늄 광물들의 산상 및 화학조성)

  • Yoo, Bong Chul
    • Korean Journal of Mineralogy and Petrology
    • /
    • v.33 no.3
    • /
    • pp.195-214
    • /
    • 2020
  • The Samgwang Au-Ag deposit has been one of the largest deposits in Korea. The deposit consists of eight lens-shaped quartz veins which filled fractures along fault zones in Precambrian metasedimentary rock, which feature suggest that it is an orogenic-type deposit. The Ti-bearing minerals occur in wallrock (titanite, ilmenite and rutile) and laminated quartz vein (rutile). They occur minerals including biotite, muscovite, chlorite, white mica, monazite, zircon, apatite in wallrock and white mica, chlorite, arsenopyrite in laminated quartz vein. Chemical composition of titanite has maximum vaules of 3.94 wt.% (Al2O3), 0.49 wt.% (FeO), 0.52 wt.% (Nb2O5), 0.46 wt.% (Y2O3) and 0.43 wt.% (V2O5). Titanite with 0.06~0.14 (Fe/Al ratio) and 0.06~0.15 (XAl (=Al/Al+Fe3++Ti)) corresponds with metamorphic origin and low-Al variety. Chemical composition of ilmenite has maximum values of 0.07 wt.% (ZrO2), 0.12 wt.% (HfO2), 0.26 wt.% (Nb2O5), 0.04 wt.% (Sb2O5), 0.13 wt.% (Ta2O5), 2.62 wt.% (As2O5), 0.29 wt.% (V2O5), 0.12 wt.% (Al2O3) and 1.59 wt.% (ZnO). Chemical composition of rutile in wallrock and laminated quartz vein has maximum values of 0.35 wt.%, 0.65 wt.% (HfO2), 2.52 wt.%, 0.19 wt.% (WO3), 1.28 wt.%, 1.71 wt.% (Nb2O3), 0.03 wt.%, 0.07 wt.% (Sb2O3), 0.28 wt.%, 0.21 wt.% (As2O5), 0.68 wt.%, 0.70 wt.% (V2O3), 0.48 wt.%, 0.59 wt.% (Cr2O3), 0.70 wt.%, 1.90 wt.% (Al2O3) and 4.76 wt.%, 3.17 wt.% (FeO), respectively. Rutile in laminated quartz vein is higher contents (HfO2, Nb2O3, As2O5, Cr2O3, Al2O3 and FeO) and lower content (WO3) than rutile in wallrock. The substitutions of rutile in wallrock and laminated quatz vein are as followed : rutile in wallrock [(Fe3+, Al3+, Cr3+) + Hf4+ + (W5+, As5+, Nb5+) ⟵⟶ 2Ti4+ + V4+, 2Fe2+ + (Al3+, Cr3+) + Hf4+ + (W5+, As5+, Nb5+) ⟵⟶ 2Ti4+ + 2V4+], rutile in laminated quartz vein [(Fe3+, Al3+) + As5+ ⟵⟶ Ti4+ + V4+, (Fe3+, Al3+) + As5+ ⟵⟶ Ti4+ + Hf4+, 4(Fe3+, Al3+) ⟵⟶ Ti4+ + (W5+, Nb5+) + Cr3+], respectively. Based on these data, titanite, ilmenite and rutile in wallrock were formed by resolution and reconcentration of cations (W5+, Nb5+, As5+, Hf4+, V4+, Cr3+, Al3+, Fe3+, Fe2+) in minerals of wallrock during regional metamorphism. And then rutile in laminated quartz vein was formed by reconcentration of cations (Nb5+, As5+, Hf4+, Cr3+, Al3+, Fe3+, Fe2+) in alteration minerals (white mica, chlorite) and Ti-bearing minerals reaction between hydrothermal fluid originated during ductile shear and Ti-bearing minerals (titanite, ilmenite and rutile) in wallrock.