• 제목/요약/키워드: Shared vehicle

검색결과 44건 처리시간 0.025초

출동 응답 향상을 위한 적정 구급차 수량 및 배치 위치 결정 연구 (Optimal Decisions on the Quantity and Locations of Ambulances for the Timely Response to Emergency Requests)

  • 정용훈;정희나;고정한
    • 한국화재소방학회논문지
    • /
    • 제31권3호
    • /
    • pp.137-143
    • /
    • 2017
  • 응급 상황 발생 시의 구급차 부족에 따른 출동 지연 감소를 위하여, 충분한 수의 구급차가 운영되어야 한다. 본 논문은 출동 지연을 최소화하기 위하여 안전센터별 적절한 119 구급차의 수량을 결정하는 효과적인 방법을 제시한다. 한 지방자치단체의 구급차 출동 요청을 분석하고, 출동 요청의 통계적 특성을 도출하였다. 119 안전센터 간의 상호 지원을 포함한 구급차 출동 시스템은 컴퓨터 시뮬레이션을 활용하여 모델링하였다. 구급차 요청의 통계적 특성과 시뮬레이션을 활용한 분석 결과, 대부분의 출동 요청에 성공적으로 응답할 수 있음을 확인하였고, 출동수행률 향상을 위한 구급차 수 증가가 효과적임도 확인하였다. 또한, 구급차를 추가로 배치할 안전센터를 찾아내는 효율적인 방법론도 제시하였다. 본 연구는, 적절한 구급차 수량 확보와 배치를 통하여, 응급환자 구조 서비스 개선에 활용될 수 있다.

A Case Study of Decreasing Environment Pollution Caused by Energy Consumption of a Dormitory Building Which Only Using Electricity by Efficiently Simulating Applying Residential SOFC (Solid Oxide Fuel Cell)

  • Chang, Han;Lee, In-Hee
    • Architectural research
    • /
    • 제21권1호
    • /
    • pp.21-29
    • /
    • 2019
  • Recent years in Korea, some new developed buildings are only using electricity as power for heating, cooling, bathing and even cooking which means except electricity, there is no natural gas or other kinds of energy used in such kind of building. In vehicle industry area, scientists already invented electric vehicle as an environment friendly vehicle; after that, in architecture design and construction field, buildings only using electricity appeared; the curiosity of the environment impact of energy consumption by such kind of building lead me to do this research. In general, electricity is known as a clean energy resource reasoned by it is noncombustible energy resource; however, although there is no environmental pollution by using electricity, electricity generation procedure in power plant may cause huge amount of environment pollution; especially, electricity generation from combusting coal in power plant could emit enormous air pollutants to the air. In this research, the yearly amount of air pollution by energy using under traditional way in research target building that is using natural gas for heating, bathing and cooking and electricity for lighting, equipment and cooling is compared with yearly amount of air pollution by only using electricity as power in the building; result shows that building that only uses electricity emits much more air pollutants than uses electricity and natural gas together in the building. According to the amount of air pollutants comparison result between two different energy application types in the building, residential SOFC (Solid oxide fuel cell) is simulated to apply in this building for decreasing environment pollution of the building; furthermore, high load factor could lead high efficiency of SOFC, in the scenario of simulating applying SOFC in the building, SOFC is shared by two or three households in spring and autumn to increase efficiency of the SOFC. In sum, this research is trying to demonstrate electricity is a conditioned environment friendly energy resource; in the meanwhile, SOFC is simulated efficiently applying in the building only using electricity as power to decrease the large amount of air pollutants by energy using in the building. Energy consumption of the building is analyzed by calibrated commercial software Design Builder; the calibrated mathematical model of SOFC is referred from other researcher's study.

분산형 실시간 제어시스템을 위한 연계 모의실험에 관한 연구 (A Co-simulation Toolbox for Distributed Real-Time Control System)

  • 김승훈;이우택;선우명호
    • 한국자동차공학회논문집
    • /
    • 제11권1호
    • /
    • pp.166-171
    • /
    • 2003
  • This paper presents the algorithms and Matlab Toolbox for co-simulation of distributed real-time control system based on OSEK-OS and CAN protocol. This toolbox enables the developers to analyze the timing uncertainty, which is caused by resource sharing including shared memories and networks, and to take the timing uncertainty into consideration in the early design phase. Furthermore, this toolbox helps the developers to model the behaviors of a control system by providing graphical user interface for objects of OSEK-OS and CAN. To prove the feasibility of this toolbox, a vehicle body network system is modeled with this toolbox, and the timing uncertainties are analyzed.

AUTOSAR 기반 공유자원이용 스케줄링 구조 (Design of Scheduling on AUTOSAR OS With Shared Resource)

  • 최준열;조준형;최윤자
    • 대한임베디드공학회논문지
    • /
    • 제13권6호
    • /
    • pp.279-288
    • /
    • 2018
  • As a result of the technological advances in the E / E system, automotive system can provide advanced functions for safety and comfort. In addition, mechanical systems is changed to the electronic system. And the systems perform cooperative functions through communication. So the E / E system becomes more complicated as the size of the system increases. In order to secure the safety of complicated E / E system, ISO26262 standard require that Freedom from Interference and Sufficient Independence be met. In this paper, we propose a software scheduling method that can guarantee the independence between decomposed components after software decomposition and software development of ASIL D level EPB (Electronic Parking Brake) system.

태양광 모듈 통합 전기 자동차용 Phase Shift Full Bridge Converter (A PV-Module Integrated Phase Shift Full Bridge Converter for EV)

  • 황윤경;남광희
    • 전력전자학회논문지
    • /
    • 제25권6호
    • /
    • pp.425-432
    • /
    • 2020
  • The phase-shifted, full-bridge (PSFB) DC-DC converter is widely used in electric vehicles (EVs) to charge a low-voltage (12 V) battery from a high-voltage battery. A Photovoltaic (PV) module-integrated PSFB converter is proposed for the EV power conversion system. The converter is useful because solar energy can be utilized to extend the driving range. The buck converter circuit is simply realized by adding one switch to the conventional PSFB converter's secondary side. For the inductor and diode, the existing components in the PSFB converter are shared. The proposed converter can charge a low-voltage battery from the PV module with maximum power point tracking. In addition, the two power sources can be used simultaneously, and efficiency is increased by reducing the circulating current, which is a problem for the conventional PSFB converter.

차량이동측량에 의한 도로 기본지리정보 갱신방안에 관한 연구 (Strategies of Updating Road Framework Data by a Vehicle-based Kinematic Survey)

  • 윤하수;이진수;서창완;최윤수
    • 한국측량학회지
    • /
    • 제25권4호
    • /
    • pp.355-363
    • /
    • 2007
  • 본 연구는 2003년도에 전국적으로 구축된 "교통(도로)분야 기본지리정보" 중 도로 기본지리정보의 최신성을 확보하기 위해서 경제적이고 신속 정확한 차량이동측량 취득방법을 이용한 도로 기본지리정보의 갱신방안을 통해 기본지리 정보의 활용성을 극대화하고자 하는데 그 목적이 있다. 이를 위해 대전시와 평택시를 대상으로 차량에 DGPS를 탑재한 차량 이동 측량방법을 이용하여 데이터를 획득하였고, 현장측량 성과와 기존 성과와의 검증은 선형 및 점형 요소의 정확도를 이용하였다. 검증 결과 인근 상시기준점들과의 거리가 가깝고 지형조건상 수신 상태가 양호한 대전지역의 경우는 1/5,000 수치지도에서 정하는 오차범위보다 그 오차가 작았으나. 상시기준점들과의 거리가 멀고 수신율이 좋지 않은 평택지역의 경우는 오차 한도를 넘는 결과를 보였다. 본 연구 결과 GPS 상시기준점과의 수신율을 분석한 후, 위성상태가 양호하지 않은 구간에 대해서는 후처리방식이나 Total Station 측량을 병행하여야 하며, 이동측량의 정확도를 확보하기 위해서는 각 기관들의 상시기준점을 공유하고, 이를 활용할 수 있는 추가 연구가 필요함을 알 수 있었다.

전기차 전과정평가를 위한 DID 기반 차량부품 데이터수집 모델 연구 (A Study on DID-based Vehicle Component Data Collection Model for EV Life Cycle Assessment)

  • 권준우;이수진;김제인;서승현
    • 정보처리학회논문지:컴퓨터 및 통신 시스템
    • /
    • 제12권10호
    • /
    • pp.309-318
    • /
    • 2023
  • 최근 세계 각국은 온실가스 배출을 규제하기 위해 전과정평가(LCA, Life Cycle Assessment)를 도입하려는 움직임을 보이고 있다. 전기차 전과정평가는 차량의 전체 수명주기에 걸쳐 발생하는 온실가스 배출량을 측정하고 평가하는 수단이다. 전과정평가 결과의 신뢰성을 높이기 위해서는 전기차 부품별로 신뢰성 있는 데이터가 필요하다. 이를 위해 최근 블록체인 기술을 적용한 전과정평가 모델에 대한 연구들이 수행되었다. 그러나 기존 연구들은 주요 제품 정보들이 다른 참여자들에게 그대로 노출되어 프라이버서 보호가 되지 않는 문제가 있고 부품데이터 정보가 업데이트될 때마다 트랜잭션 형태로 블록체인 원장에 기록해야 해서 비효율적이다. 따라서 본 논문에서는 효율적으로 전기차 차량부품 데이터를 수집하고 유효성을 검증하기 위해 전과정평가를 위한 DID 기반의 데이터수집 모델을 제안한다. 제안하는 모델은 수집된 데이터의 유효성과 무결성을 보장하며 블록체인 원장에는 사용자 인증 정보만 공유되어 데이터의 무분별한 노출을 방지하고 데이터의 출처를 효율적으로 검증 및 업데이트할 수 있다.

Development of the Multi-mobility Sharing Service Management System - A Case Study of Kashiwa City, Japan -

  • 김재열;츠보우치 코우타;야마토 히로유키
    • 한국ITS학회 논문지
    • /
    • 제13권1호
    • /
    • pp.75-85
    • /
    • 2014
  • 기존 카쉐어링 시스템은 원웨이 트립 수요에 대한 대응과 타 쉐어링 시스템과의 연계가 어려운 문제점이 있다. 이에 본 연구에서는 원웨이와 라운드웨이 트립에 대응이 가능하며, 자동차(전기/가솔린), 전기오토바이, 자전거 등의 다양한 교통수단을 공유할 수 있는 멀티모빌리티 쉐어링 서비스 메니지먼트 시스템을 개발하여 일본 치바현 카시와시 카시와노하지역과 나가레야마시에 모의실험을 실시하였다. 모의실험 결과, 이 시스템을 통해 전체 자동차 트립 중 54.9%의 원웨이 트립 수요가 충족되었으며, 전체 이용자 중 43.9%가 공통 인터페이스를 통해 복수의 교통수단을 이용한 것이 확인되었다. 또한, 차량의 공동이용과 친환경 차량 이용을 통해 이산화탄소 배출량도 삭감에도 공헌하였다. 개발된 쉐어링 시스템은 기존 카쉐어링 시스템 보다 다양한 교통수요에 대응하면서 이동성을 향상 시킬 것으로 기대된다.

전기자동차 배터리 추적 시스템을 위한 RFID 코드체계 설계에 관한 연구 (A Study on RFID Code Structure for Traceability System of Electric Vehicle Batteries)

  • 김우람;장윤석
    • 한국ITS학회 논문지
    • /
    • 제12권4호
    • /
    • pp.95-104
    • /
    • 2013
  • 지구 온난화, 화석연료의 고갈 등이 중요한 문제로 대두됨에 따라 전기자동차가 관심을 얻고 있다. 그러나 배터리 충전 시간, 높은 배터리 제조비용 등은 전기자동차가 널리 보급되는데 장애요인이 되고 있다. 이런 기술적 문제점을 해결하기 위한 대안으로 배터리를 교체하여 운행하는 운영 방식이 개발되었다. 배터리 교체형 시스템에서는 배터리의 공급망이 복잡하기 때문에 배터리의 신뢰성 확보 및 관리의 효율화를 위해서는 배터리 이력추적 시스템의 구축도 함께 진행되어야 한다. 본 연구에서는 전기자동차 배터리 이력추적 시스템에서 배터리 식별을 위해 사용될 RFID 코드를 설계하였다. 설계된 코드는 EPCglobal의 GRAI-96 표준을 기반으로 하였으며 배터리의 외형적 특성, 화학적 특성, 제조사, 제조일 등을 반영하였다. 설계된 코드는 RFID 코드뿐만 아니라 각 배터리의 개체식별번호로도 적용이 가능하다.

델파이 기법을 적용한 자율주행시대 도로 설계 및 운영 변화 방향 연구 (A Study on the Changes of Road Design and Operation in the Age of Autonomous Driving, Using Delphi Technique)

  • 김보성;윤재용
    • 한국ITS학회 논문지
    • /
    • 제23권3호
    • /
    • pp.80-96
    • /
    • 2024
  • 본 연구는 Lv.4/4+ 자율주행 시대에 도로 설계, 운영, 시스템의 변화 방향을 분석하기 위해 도로, 교통, 자동차, ITS, 통신 분야의 전문가들을 대상으로 2차에 걸쳐 델파이 조사를 수행하였다. 델파이 조사 항목을 구성하기 위해 기초 설문조사를 진행하였으며, 자율주행과 밀접한 관련이 있는 분야의 전문가 14명을 대상으로 1차, 2차 델파이 조사를 진행하였다. 조사 결과 미래에는 공유형 AV, 대중교통 환승 중심의 교통운영으로 변경될 것으로 예상되며, 이에 따른 횡단구성의 변경이 있을 것으로 보여진다. 자율주행전용차로는 고속도로, 일반국도부터 도입이 예상되며, 도로 가측부가 아닌 도로 중앙부에 설치되고 기존 도로와 동일한 차로폭을 사용할 것으로 의견이 모아졌다. 자율주행자동차를 위해 시설물 측면에서는 보차분리시설의 확충이 필요하며, 위치 인식을 위한 시설물에 통신칩 삽입, 정밀지도 고도화, 노변통신시설 확충 등이 필요한 것으로 나타났다.