• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.149-154
• /
• 2007

Now, in Korea, the performances of the building service equipment relay on the individual superintendent's share for the assessment of performance, fault detection, deterioration diagnosis of the building service equipment. As the result, very different quality of the performance or the durability of equipment is being obtained with his skill and effort and it is also not easy to assess that quality. This finally lead to the waste of labor force and the operating cost due to the high-cost, low-efficiency system. How to construct the N-BMS was considered to save energy, resource and to conserve performance of building service equipment. The FEMIS, facility, energy/environmental management & information system, for building service offer management process integrated with BAS, FMS and EMS and so on.

• Journal of Agricultural Extension & Community Development
• /
• v.23 no.2
• /
• pp.145-156
• /
• 2016

The purpose of this study is to analyze the farms growing domestic kiwi fruit 'Gold' on their management performance and efficiency in order to reduce the risks involved with introducing new kind of crops for growing, and suggest improvements. First, the result of analysis showed that domestic kiwi fruit 'Gold' growers' income were higher than the average growers due to the fruit's high unit price and productivity. Second, the analysis of management efficiency resulted in scale efficiency having greater impact on inefficiency rather than pure technical efficiency. As for the analysis of technical efficiency, the depreciation costs of agricultural facilities had the greatest influence on its inefficiency. Third, inefficient farms put in excessive inputs across the board, while labor costs(self labor cost + hired labor cost) were the largest factor of optimal inputs according to the models of technical efficiency and pure technical efficiency. Fourth, because of greater reliance on mechanical tools from rising labor costs, there's a need for individual farms to avoid buying farming equipments and instead share the equipments of nearby farms and agricultural cooperatives, or start renting agricultural machines from companies.

• Korea Journal of Hospital Management
• /
• v.4 no.2
• /
• pp.21-40
• /
• 1999

One Diagnosis Related Group(DRG) pilot study participating hospital was measured and analyzed to see if there were any changes after the DRG program. It was implemented in consideration of medical service utilization, hospital charges, and non-covered medical service charges by insurance in all Cesarean section cases by reviewing medical records for 3 years, including 1 year before pilot study as well as 1 and 2 years after, respectively. The results were as follows: First, the use of intramuscular antibiotics decreased statistically significantly, whereas intravenous use did not. Second, the administration period and charges of antianemic medication decreased significantly, where the prescription was appropriate. Third, the length of hospital stay decreased statistically significantly. Fourth, there were significant statistical differences in cost sharing between the insured and the insurer: cost sharing of the insured was reduced, whereas the share of the insurer increased. However, there was no change in the quality of care. Fifth, there were no statistically significant changes in the Cesarean section rate. As a result, if the fee schedule is reasonably high, hospitals can provide quality care. This DRG pilot study resulted expected outcomes: by paying a higher fee schedule than fee-for-service, then hospitals can provide quality care to their patients and increase hospital profits.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.2
• /
• pp.91-102
• /
• 2014

The outer surface of an irregular structure contains panels with two-directional curvature called NURBS. To construct these forms of exterior materials, complex geometric surface should be divided into forms and sizes that can be manufactured and constructed. Because the bigger the curvatures of these divided exterior panel, the more expensive the construction costs, these complex two-directional curvatures should go through optimal process of reinterpretation to minimize the curved surfaces with complex two-directional curvatures. Yet, to gain higher ground in technological competition in the field of irregular structure construction, companies do not share know-how that they obtained. Accordingly, small construction and design companies have trouble calculating even rough estimate and cannot adjust expected construction cost based on comparison of design alternatives. Given this situation, this study conducted the research that can support decision-making in the design stage of the construction and provide basic material for optimal range to reduce manufacturing cost by the minimizing the distorted plane of the irregular structure.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.1
• /
• pp.73-93
• /
• 2012

The primary objective of this research is to explain how to implement the Service Oriented Architecture (hereafter SOA) enabled Enterprise Resource Planning (hereafter ERP) system successfully for service industries. An implementation of the ERP system help many organizations to alleviate the difficult job of supporting inflexible or legacy systems that in most cases result in cost increases, data redundancy and inaccuracy, and various inefficiencies. However, the ERP system is losing its market share rapidly to the cloud computing system which utilizes the Software-as-a-service (hereafter SaaS) and SOA. The SOA is an approach to integrate various types of IT resources to leverage existing ERP system, while at the same time building an infrastructure that can readily respond to new business environment and offer new dynamic applications. The companies that implement this system have less of a need for the kinds of all-in-one ERP system that have dominated the back office for decades and can move freely to best-of-breed applications. This research will identify the benefits and costs of the SOA enabled ERP system through case studies and its impact on competitive priorities such as cost, quality, delivery, and flexibility.

• Asian Journal of Atmospheric Environment
• /
• v.8 no.1
• /
• pp.59-68
• /
• 2014

The Fukushima nuclear accident in 2011 had an extensive impact on the national electricity plans. This paper outlines alternative electricity scenarios that meet the goals of nuclear phase-out and greenhouse gas (GHG) emission reduction. This paper also analyzes the results of each scenario in respect to the electricity mix, GHG emissions, costs and employment effects. The Long-range Energy Alternatives Planning system (LEAP) model was used to simulate the annual electricity demand and supply system from 2011 to 2030. The reference year was 2009. Scenarios are reference (where existing plans are continued), A1, A2, B1, B2, and C2 (where the levels of demand management and nuclear phase-out are different). The share of renewable energy in the electricity mix in 2030 for each scenario will be increased from about 1% in 2009 to 8% in the reference scenario and from 11% to 31% in five alternative scenarios. Total cumulative cost increases up to 14% more than the reference scenario by replacing nuclear power plants with renewable energy in alternative scenarios could be affordable. Deploying enough renewable energy to meet such targets requires a roadmap for electricity price realization, expansion of research, development and deployment for renewable energy technologies, establishment of an organization dedicated to renewable energy, and ambitious targets for renewable energy.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.2
• /
• pp.212-219
• /
• 2012

This study focus on what methods of MOT are needed and utilized to solve a technical problem in the MOT leading company. We first classified the MOT methods by project life cycle and R&D job quality based on the several discussion with working group. In order to study, the survey was carried out by 168 experts working on MOT practices. Our main research findings are as follows. The level of utilized MOT methods was above average because MOT sector was beginning to represent an increasing share of total R&D business. But the satisfaction level on the MOT majors was below average. The more utilized MOT methods in practices were 'environment analysis and opportunity research,' 'business feasibility,' 'roadmapping,' 'portfolio,' 'technology tree,' 'scheduling,' 'risk management,' 'six sigma,' 'design of experiment,' 'quality control,' 'cost analysis' etc. And the subjects of product realization process were also needed to MOT practice such as 'design for reliability,' 'design for cost,' 'design for performance,' 'design for safety' deeply involved to product quality. Finally, the capability requested to University students were 'problem define and solving,' 'technology planning and strategy,' 'creative thinking.'

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.4
• /
• pp.304-310
• /
• 2011

The express courier business in Korea has been recognized as one of promising business sectors with the annual growth rate of over 10 percent since 2001. As such many domestic and foreign companies have been established and are fiercely competing to extend their own market share. The severe competition has forced them to focus on achieving cost competitiveness and high level of customer service. Small and medium-sized enterprises( SMEs) with relatively poor network infrastructure in particular are facing tougher challenges to cost reduction and efficiency improvement in their logistics networks. Strategic alliances among SMEs may be an effective way to cope with these challenges. Therefore this study proposes an integer programming model for compromised network design and its solution procedure based on maxmin and maxsum criteria for strategic alliances. The applicability and efficiency of the proposed model are demonstrated through an illustrative numerical example.

• Current Photovoltaic Research
• /
• v.6 no.1
• /
• pp.1-11
• /
• 2018

Current major photovoltaic (PV) market share (> 60%) is being occupied by the multicrystalline (mc)-silicon solar cells despite of low efficiency compared to single crystalline silicon solar cells. The diamond wire sawing technology reduces the production cost of crystalline silicon solar cells, it increases the optical loss for the existing mc-silicon solar cells and hence its efficiency is low in the current mass production line. To overcome the optical loss in the mc-crystalline silicon, caused by the diamond wire sawing, next generation texturing process is being investigated by various research groups for the PV industry. In this review, the limitation of surface structure and optical loss due to the reflectivity of conventional mc-silicon solar cells are explained by the typical texturing mechanism. Various texturing technologies that could minimize the optical loss of mc-silicon solar cells are explained. Finally, next generation texturing technology to survive in the fierce cost competition of photovoltaic market is discussed.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.247-258
• /
• 2015

The purpose of this study is to let the entire logistics system be managed in cyberspace by effectively sharing the logistics information between companies involved in the process, changing conventional commerce to electronic commerce. Most of the goods traded through electronic commerce are small goods involving small business transactions. This produces many problems in shipping and delivery and the leads an inefficient logistics system. Another problems is that there is no sharing of information that process the logistics flow and no systematic management of pick-up and delivery information. As a result, rise in logistics cost, longer delivery period and poor service quality are inevitable and these results are becoming an obstacle in the widespread usage of the electronic commerce. Companies that are part of logistics center can cooperate logistics business in Cyber space and share the entire logistics information through the cyber logistics center. This turns out in effective sharing of logistics information, and thus, allows efficient management of logistics, improves logistics service, and reduces logistics cost.