• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제14권4호
• /
• pp.795-805
• /
• 1994

This paper presents the analytical results for the prediction of elastical local buckling stress of fiber reinforced plastic (orthotropic) structural shapes manufactured from pultrusion process. In the derivation, existing Bleich's approach which was originally derived for the isotropic structural shapes was extended and non-dimensionalized parameters which can simplify the numerical calculations were adopted. Analytical results were compared with reported closed-form solutions and experimental results. It is graphically shown that the results can be used effectively to predict the local buckling stress of pultruded fiber reinforced plastic structural shapes. Numerical results were presented graphically to estimate the local buckling stress of various cross-sectional dimensions and lengths of columns. In addition, limits of width to thickness ratio of flange and web of pultruded structural shapes were suggested in which material failure or overall buckling occurs prior to local buckling.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• 제11권3호
• /
• pp.75-81
• /
• 2011

Protein molecules are combined with another ones which have similar shapes at pocket positions. The pocket positions can be good references to describe the shapes of protein molecules. Harris corner detector is commonly used to detect feature points of 2 or 3D objects. Feature points can be found on the pocket areas and the points which have high derivatives. Generally speaking, the densities of feature points are relatively high at pocket areas because the shapes of pockets are concave. The pocket areas can be decided by the subdivision of voxel cubes which include feature points. The Euclidean distances between feature points and the central coordinate of the decided pocket area are calculated and sorted. The graph of sorted distances describes the shape of a protein molecule and the distribution of feature points. Therefore, it can be used to classify protein molecules by their shapes. Even though the shapes of protein molecules have been distorted with noises, they can be recognized with the accuracy more than 95 %. The accurate shape recognition provides the information to predict the binding properties of protein molecules.

• Journal of the Korea Fashion and Costume Design Association
• /
• 제18권2호
• /
• pp.35-49
• /
• 2016

Dopo was the clothing of the Joseon period, which had a strong value of Confucianism. Apart from the kings and princes, government officers and Confucian literati wore Dopo as their official clothing and the uniform. The basic form of Dopo had the straight collar similar to Jikryeong. The difference is the shape of a Mu, which was fixed inside or on the back section along the side line of the front section and made two flaps on the back section. The clothing found in the tombs of Bae Cheonjo (1532~?) are from the mid-16th century to the early 17th century with the clothing style of the early Joseon period. The outer collar of all clothing was the shawl collar except for the Sibok and the inner collar was sewn to this. Two items had square tray collars, which were folded in half and sewn inside in half. The sleeve had a straight inseam from the armhole and its end around the wrist was round and wide. The carp-shaped inseam of the sleeve and wide sleeve indicated a change of sleeve shape. The shapes of the collars and the wide overlapped section of the dual collars demonstrated the shapes of the initial outer robes. The man's outer coats with wide sleeves were mostly cotton-quilted clothing. As described above, this paper examines the basic shapes of outer robes including Sibok, Jikryeong and man's outer coats on the basis of the clothing and artifacts from the tomb of Bae Cheonjo (1532~?) and examined the shapes, composition and features of Dopo. This paper aims to improve awareness of the wisdom and spirit of ancestors in life hidden in the sewing of the three Dopo items and on the importance of historical research.

• Journal of the Korean Society of Costume
• /
• 제54권3호
• /
• pp.1-11
• /
• 2004

As Confucian ideology dominated all over the society, the androcentric patriarchical society in the last of Chosun Dynasty produced the unequal power relationship between man and woman. It was traditional hostesses(kisaengs) who uniquely had an occupation among the women in this society. In modern society. they are reinterpreted as 'fashion leaders' or 'professional career women with expert knowledge and it caused a lot of the studies of them to be in a progression vigorously. Therefore this paper studied on the influence of the traditional hostesses(kisaengs) -who were educated and permitted in ther social activity formally in a Confuanism-governed society which forbided a woman to participate in a social activity and which did not gave ladies any formal education. The general hostess in the beginning time of the Chosun Dynasty imitated the hair shape of women in the yangban family which formed the highest class in the Chosun Dyansty and it reflected their aspiration for the highest social class. Howerver, coming into the last age of the chosun dynasty, a reverse phenomenon -that women in the yangban family imitated the general hostesses' hairstyle -occured due to the spread of a genre painting ＆ the concubine system. The general hostesses were educated systematically and did social activity and influenced hair shapes as they were independent economically and their influence in the part of hairstyle appeared as great and high EONJIN MEURI and as one-sided EONJIN MEURI. Regarding-as the result of this study on the influence of the traditional hostess's hair shapes on the ladies hair shapes in the last of Chosun Dynasty -that the traditional hostesse of the last age of chosun dynasty played a role as a fashion leader of the ladies at the same age. the general hostesses in Chosun Dynasty should be revaluated... And the study of ladies which were hidden behind the scenes of Confuanism should be made much more.

• Transactions of the Korean Society of Mechanical Engineers
• /
• 제14권1호
• /
• pp.1-12
• /
• 1990

The study is concerned with the analysis of combined forging of non-axisymmetric shapes with inclined protrusions by UBET technique. Work hardening is considered for the given range of strain rate during the forging process. A complex shape with inclined cavities is analyzed by subdividing the workpiece into finite UBET elements for which simple velocity fields are applicable. An experimental set-up was designed and manufactured for the experiment, and experiments are carried out with lead billets. The devised set-up can be used for closed-die forging of complex shapes with protrusions in which the dies can be separated automatically for easy removal of the forged products. Based on the derived kinematically admissible velocity fields for corresponding UBET elements, general computer programs have been developed. Since the energy dissipation rate for each elemental region is provided by subprograms (Subroutine or Function), the developed program can be applied to the forging problems of various shapes. The present study has shown that the method developed can be effectively applied to forging of non-axisymmetric shapes with complicated protrusions.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제19권6호
• /
• pp.995-1007
• /
• 1995

The purpose of this study is to examine on breast shapes of elderly women and provide fundamental data for developing brassiere. Numerous anthropometric measurements and other related data from 398 subjects were analyzed by various statistical methods such as ANOVA, Correlation analysis, Factor analysis and Cluster analysis. 1. Analysis of Breast Measurements The subjects were categorized into three groups(Group I; aged 55 to 64, Group II; aged 65 to 74, Group III; aged more than 75). 1) The results of the comparative analysis of anthropometric data from three groups show that by getting older: - $\circled1$ Breast lengths, widths, heights and bust girths are decreased significantly $\circled2$ Various length measurements related to the drooping degree of breast are increased $\circled3$ Some measurements related to the volume of breast are decreased. 2) The results of the correlation analysis among measurement show that there are no directs linear relationships between under bust girth and bust drooping. Further it turned out that the cup size could be used as a factor explaining the volume of breast due to large subject variation, Thus it is required to have more specific information about the breast volume. 2. Analysis of Breast Shapes 1) From 17 measurements, 5 factor were selected as key factors for the factor analysis of breast analysis of breast shapes. The 5 factors are: $\circled1$ Drooping degree of breast $\circled2$ slope between breast and chest, width of bust point $\circled3$ Contours and prominence of breast at the point of front and side $\circled4$ Breast volume $\circled5$ Breast width. 2) We categorized the breast shapes into three types by Cluster analysis. Type 1 is the most common breast shape in elderly women. $\circled1$ Type L: Not too droopy and large breast $\circled2$ Type 2: A little droopy and small breast $\circled3$ Type 3; Very droopy and wide breast

• Journal of the Korean Society for Precision Engineering
• /
• 제21권1호
• /
• pp.140-148
• /
• 2004

A novel rapid prototyping (RP) process, a full-automated transfer type variable lamination manufacturing process (Full-automated VLM-ST) has been developed. In the full-automated VLM-ST process, a vacuum chuck and a rectilinear motion system transfer the EPS foam material in the form of the plate with two pilot holes to the rotary supporting stage. The supplied material is then cut into an automated unit shape layer (AUSL) with a desired width, a desired length, a desired slope on the side surface, and a pair of reference shapes, which is called the guide shape (GS)’, including two pilot holes in accordance with CAD data through cutting in two steps using a four-axis synchronized hotwire cutter. Then, each AUSL is stacked by setting each AUSL with two pilot holes in the building plate with two pilot pins, and subsequently, adhesive is applied onto the top surface of the stacked AUSL by a bonding roller and pressure is simultaneously given to the bottom surface of the stacked AUSL. Finally, three-dimensional shapes are rapidly and automatically fabricated. This paper describes the method to generate guide shapes in AUSL data for the full-automated VLM-ST process. In order to examine the applicability of the method to generate guide shapes, three-dimensional shapes, such as a piston shape and a human head shape, are fabricated from the full-automated VLM-ST apparatus.

• Structural Monitoring and Maintenance
• /
• 제7권3호
• /
• pp.215-231
• /
• 2020

In a reinforced concrete building different shapes of column are adopted depending on the structural orientation and the architectural aspect. When there is an increase in loading due to changes in usage or revision in the design codes these columns need to be strengthened for enhanced performance during their service life. Strengthening materials such as carbon fiber and glass fiber polymer has been successfully used however, due to high cost application other alternative materials need to be explore. Galvanized steel wire mesh (GSWM) is one of the suitable materials locally available. High tensile strength, low weight, corrosion resistance, easy installation, minimum change in dimensions of the sections and cost effectives are the advantages of GSWM. Therefore, in this paper, four different shapes of column such as circular, square, rectangular and L were wrapped with different layers GSWM and jacketed with mortar. All the specimens were tested under axial compression. The objective of the study is to investigate the effectiveness of GSWM as a confining material for strengthening of column having varying shape. Test results shows that the axial strength enhanced with wrapping of GSWM jacket and a circular column presented the highest load carrying capacity and ductility as compared to the others. From the study of 22 column specimens, it is found that axial load is increased upto 20% and 19% when circular and square column are strengthened with one wrap of GSWM respectively, while a rectangular and L column required a wraps of two and three layers respectively in order to achieved the same load capacity as that of a circular column. Based on the present study, it is concluded that GSWM can be effectively used for strengthening of different shapes of concrete columns economically.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제19권4호
• /
• pp.614-623
• /
• 1994

Synthesizing speech and facial images is necessary for human interface that man and machine converse naturally as human do. The target of this paper is synthesizing the facial images. In synthesis of the facial images a three-dimensional (3-D) shape model of the face is used for realizating the facial expression variations and the lip shape variations. The various facial expressions and lip shapes harmonized with the syllables are synthesized by deforming the three-dimensional model on the basis of the facial muscular actions. Combications with the consonants and the vowels make 14.364 syllables. The vowels dominate most lip shapes but the consonants do a part of them. For determining the lip shapes, this paper investigates all the syllables and classifies the lip shapes pattern according to the vowels and the consonants. As the results, the lip shapes are classified into 8 patterns for the vowels and 2patterns for the consonants. In advance, the paper determines the synthesis rules for the classified lip shape patterns. This method permits us to obtain the natural facial image with the various facial expressions and lip shape patterns.

• Human Ecology Research
• /
• 제52권5호
• /
• pp.509-518
• /
• 2014

This study strives to analyze the characteristics of and changes in breast shapes of women in their 30s, whose bodies start to age and whose breasts experience changes due to internal and external factors such as pregnancy, childbearing, and breast-feeding. The analysis of the indirect breast measurements for each age group (early, mid, and late 30s) demonstrates that the volume of the breasts increases proportionally with age, the breasts lose their firmness, and the nipples start to point downwards rather than to the sides. The breast shapes experience more significant changes vertically than horizontally as the breasts start to sag downwards. The composition factors of the breasts have been classified into five factors: the level of volume in the breasts and the surrounding area, the degree of sagging in the breasts, the position and vertical width of the breasts, the volume of the breasts, and the degree of width between the breasts. The breasts have been categorized into three different shapes. Breast Shape I (32.56%) appeared most frequently among women in their mid 30s, and this shape falls into the category of Sagging I, which is one of the six breast types that have been classified by the Japanese Wacoal Research Center, in addition to Korean size 80A. Breast Shape II (38.76%) appeared most frequently among women in their mid 30s, and this shape has been categorized as flat with its size being 70A. Breast Shape III (28.68%) appeared most frequently among women in their early 30s with a conical shape and size 75A.