• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.195-201
• /
• 2014

In this paper, an AccessPoint compact microstrip patch antenna was designed by using L-shaped feeding structure of a Fractal Structure and the compact antenna can be obtained by the rare formed presence of the resonance flow which is called "Crossed-Diagonal". CST's MicroWave5.0 was used for the design. As the operating characteristics of the patch antenna, it showed the characteristic of 1031 [MHz] or 29.4% in the range of 3.202 [GHz] ~ 4.233 [GHz] when an input return loss is less -10 [dB] and VSWR 2:1, also as it is in this paper, we got simulation results such as, gains of the E-plane and H-plane are 8.7 [dBi] and 8.6 [dBi] for this is the single patch, and 3 [dB] beamwidth is $43.9^{\circ}$ at E-plane and $78.7^{\circ}$ at H-plane.

• Smart Structures and Systems
• /
• v.19 no.5
• /
• pp.487-497
• /
• 2017

Semi-active devices use the building's own motion to produce resistive forces and are thus strictly dissipative and require little power. Devices that independently control the binary open/closed valve state can enable novel device hysteresis loops that were not previously possible. However, some device hysteresis loops cannot be obtained without active analog valve control allowing slower, controlled release of stored energy, and is presents an ongoing limitation in obtaining the full range of possibilities offered by these devices. This in silico study develops a proportional-derivative feedback control law using a validated nonlinear device model to track an ideal diamond-shaped force-displacement response profile using active analog valve control. It is validated by comparison to the ideal shape for both sinusoidal and random seismic input motions. Structural application specific spectral analysis compares the performance for the non-linear, actively controlled case to those obtained with an ideal, linear model to validate that the potential performance will be retained when considering realistic nonlinear behaviour and the designed valve control approach. Results show tracking of the device force-displacement loop to within 3-5% of the desired ideal curve. Valve delay, rather than control law design, is the primary limiting factor, and analysis indicates a ratio of valve delay to structural period must be 1/10 or smaller to ensure adequate tracking, relating valve performance to structural period and overall device performance under control. Overall, the results show that active analog feedback control of energy release in these devices can significantly increase the range of resetable, valve-controlled semi-active device performance and hysteresis loops, in turn increasing their performance envelop and application space.

• ALGAE
• /
• v.24 no.3
• /
• pp.139-147
• /
• 2009

Microalgae using a submersible fluorescence probe in water column (up to 100 m) were measured during the austral summer of 2006 (February) in Prydz Bay, East Antarctica (triangular-shaped embayment in the Indian sector of Southern Ocean). Concurrently, environmental parameters such as temperature, salinity and nitrogen (nitrate, ammonium, urea) uptake rates were measured. The concentration of phytoplankton is relatively high due to availability of high nutrients and low sea surface temperature. Phytoplankton community is dominated by diatoms whereas cryptophytes are in low concentration. The maximum concentration of total chlorophyll is 14.87 ${\mu}g\;L^{-1}$ and is attributed to upwelled subsurface winter water due to local wind forcing, availability of micro-nutrients and increased attenuation of photosynthetically available radiation (PAR). Concentration of blue-green algae is low compared to that of green algae because of low temperature. Comparatively high concentration of yellow substances is due to the influence of Antarctic melt-water whereas cryptophytes are low due to high salinity and mixed water column. Varied concentrations of phytoplankton at different times of Fluoroprobe measurements suggest that the coastal waters of Prydz Bay are influenced by changing sub-surface water temperature and salinity due to subsurface upwelling induced by local winds as also melting/freezing processes in late summer. The productivity is high in coastal water due to the input of macro as well as micro-nutrients.

• Journal of Broadcast Engineering
• /
• v.4 no.2
• /
• pp.134-143
• /
• 1999

In this paper, in order to implement the IDWT(inverse discrete wavelet transform) with relatively low complexity, we propose a VLSI architecture for odd-tap linear-phase IDWT filters. By considering the symmetric property of the linear phase filter, the input is added to the one located at symmetrical position of the filter before filtering. Then. we rearrange the delay line of the filter in a U-shaped fashion. requiring no global interconnection between the components. The proposed architecture for the IDWT filter consists of delay units. operator units, adder units. and postprocessor unit. Since each units are configured regularly and interconnected locally. the proposed architecture can accommodate arbitrary linear phase IDWTs by simply adding/removing the corresponding units. The M -level IDWT can be implemented by interconnecting the proposed architecture in a cascaded or semi-recursive form. It is expected that the proposed architecture for the IDWT can be effectively employed in the related area including MPEG-4, since the proposed architecture is less complex than the conventional architectures.

• Microbiology and Biotechnology Letters
• /
• v.39 no.3
• /
• pp.218-223
• /
• 2011

To obtain eicosapentaenoic acid (EPA)-producing bacteria, some 600 strains of bacteria were isolated from Antarctic sediment and marine organisms during the summer expedition of 1999-2000 and 7 EPA-producing bacteria were obtained through screening with TLC and GC. A strain designated as L93 showed the highest EPA production, which was gram-negative, rod-shaped bacterium. L93 strain was identified as Shewanella sp., from the sequence analysis of 16S rDNA. Optimal conditions temperature and pH for the growth and EPA production were about $4^{\circ}C$ and pH 7. In addition, its production was optimized by 50%(w/v) sea salt. We establish the optimal production system to produce about 320 mg per liter by using this optimal EPA production conditions. EPA-methyl ester was purified from cultured L93 strain to a purity of higher than 97% and typical purification yield is greater than 72% of the input amount via urea complexation and HPLC.

• Smart Structures and Systems
• /
• v.22 no.4
• /
• pp.413-424
• /
• 2018

The factors affecting the shear strength of the angle shear connectors in the steel-concrete composite beams can play an important role to estimate the efficacy of a composite beam. Therefore, the current study has aimed to verify the output of shear capacity of angle shear connector according to the input provided by Support Vector Machine (SVM) coupled with Firefly Algorithm (FFA). SVM parameters have been optimized through the use of FFA, while genetic programming (GP) and artificial neural networks (ANN) have been applied to estimate and predict the SVM-FFA models' results. Following these results, GP and ANN have been applied to develop the prediction accuracy and generalization capability of SVM-FFA. Therefore, SVM-FFA could be performed as a novel model with predictive strategy in the shear capacity estimation of angle shear connectors. According to the results, the Firefly algorithm has produced a generalized performance and be learnt faster than the conventional learning algorithms.

• Journal of IKEEE
• /
• v.15 no.4
• /
• pp.299-304
• /
• 2011

In this paper, the circular polarized horn antenna composed of circular polarizer and impedance transformer is designed, and fabricated. For the circular polarizer, two types of the polarizer are designed and the electrical performance of them is compared; rectangular waveguide polarizer with $45^{\circ}$-inclined dielectric slab and oval shaped one. Straight type mode converter has a stepped impedance structure and plays a role of converting waveguide TE mode into coaxial TEM mode, and the proposed antenna is designed to directly connect with active components using the feed-through in the input port of the mode converter. Fabricated antenna has the wideband performance, VSWR<1.5 and Axial ratio < 1.0dB, ranging from 30.085 to 30.885 GHz, and the antenna gain is 6.7~7.0 dBi.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.151-155
• /
• 2005

Though the nuclear fusion system has been fused into hydro-nuclear based on thermodynamics by tokamak system, there has been no success story. Because it's impossible to confine high temperatured plasma long Time actually. New nuclear-fusion-system using this nuclear-fusion-method will gather toroidal-magnetic-field by putting Core Block(C shaped torus iron) and toroidal-aluminium coil into toroidal magnetic-field-aluminium. That will arrange the nuclear-fusion-route on a gap fallen out by a part of cut torus-core and mkee the toroidal-an electric-current flow and electrolyze the fusioned-material (an electrolyte) into troidal-electrocity. That consists of troidal-magnetic-fild coil, toroidal-coial fusioned- material, series circuit. So toroidal-electocity will be changed into filament-electrocity and be introjected into fusioned-material. In a sapce on filament-electrocity, the magnetic inhaling-powr will enlarge to input-electrocity outside. This will exceed the Coulomb force and reache the nuclear-fusion. By this phenomenon there be quantity-loss. By this process I could confirmed that Einstein euation$(E=mC^2)$ releases into thermal energy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4095-4100
• /
• 2011

In this paper, a log periodic bow-tie dipole array (LPBDA) antenna for UWB communications is investigated. Bow-tie shaped dipole elements are used instead of general dipole elements for LPDA antennas and the input reflection coefficient and realized gain characteristics of the LPBDA as a function of a flare angle are analyzed. It turns out that as the flare angle of the bow-tie dipole elements is increased, the lowest operating frequency is shifted toward lower frequency and the operating frequency band is increased, but the average gain is decreased. However, the gain variation of the LPBDA is much decreased and the front-back ratio is improved compared to the LPDA. Standard LPDA and LPBDA with a flare angle of 13 degrees are fabricated on an FR4 substrate with a dielectric constant of 4.4 and a thickness of 1.6 mm. Measured gain for the LPDA ranges from 4 to 6.5 dBi at 3.1 to 10.6 GHz band, while that for the LPBDA is in the range of 4.2 to 5 dBi.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.807-810
• /
• 2009

In this paper, we consider the shortest path problems in a simple polygon. The shortest path between two points inside a polygon P is a minimum-length path among all paths connecting them which don't pass by the exterior of P. A linear time algorithm for computing the shortest path in a general simple polygon requires triangulating a polygon as preprocessing. The linear time triangulating is known to very complex to understand and implement it. It is also inefficient in cases without very large input size. In this paper, we present the customized shortest path algorithms for specific polygon classes such as star-shaped polygons, edge-visible polygons, and monotone polygons. These algorithms need not triangulating as preprocessing, so they are simple and run very fast in linear time.