• Smart Structures and Systems
• /
• v.26 no.5
• /
• pp.591-603
• /
• 2020

Dynamic deflection monitoring is an essential and critical part of structural health monitoring for high-speed railway bridges. Two critical problems need to be addressed when using inclinometer sensors for such applications. These include constructing a general representation model of inclination-deflection and addressing the ill-posed inverse problem to obtain the accurate dynamic deflection. This paper provides a dynamic deflection monitoring method with the placement of optimal inclinometer sensors for high-speed railway bridges. The deflection shapes are reconstructed using the inclination-deflection transformation model based on the differential relationship between the inclination and displacement mode shape matrix. The proposed optimal sensor configuration can be used to select inclination-deflection transformation models that meet the required accuracy and stability from all possible sensor locations. In this study, the condition number and information entropy are employed to measure the ill-condition of the selected mode shape matrix and evaluate the prediction performance of different sensor configurations. The particle swarm optimization algorithm, genetic algorithm, and artificial fish swarm algorithm are used to optimize the sensor position placement. Numerical simulation and experimental validation results of a 5-span high-speed railway bridge show that the reconstructed deflection shapes agree well with those of the real bridge.

• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.1
• /
• pp.75-83
• /
• 1995

The purpose of this study is to investigate the effect of heat treatments on the martensite transformation and tensile deformation behavior in Ti-Ni-B alloys with various boron concentration. Three types of heat treatment are given to the specimens; i) solution treatment ii) aging iii) thermo-mechanical treatment. In solution treated specimens. R-phase transition which is related to abnormal increase of electrical resistance prior to martensitic transformation has been formed at a boron content of 0.2at % and the $M_s$ temperature has been decreased with the increasing of boron content. However. It has not been affected by aging, while that of thermo-mechanically treated specimens has been remarkably increased in the vicinity of recrystallization temperature. The thermo-mechanically treated specimen has showed a good thermal fatigue characteristics, shape memory effect and superelasticity in comparison with the solution treated specimen.

• Structural Engineering and Mechanics
• /
• v.28 no.2
• /
• pp.221-238
• /
• 2008

Numerical solution to buckling analysis of beams and columns are obtained by the method of differential quadrature (DQ) and harmonic differential quadrature (HDQ) for various support conditions considering the variation of flexural rigidity. The solution technique is applied to find the buckling load of fully or partially embedded columns such as piles. A simple semi- inverse method of DQ or HDQ is proposed for determining the flexural rigidities at various sections of non-prismatic column ( pile) partially and fully embedded given the buckling load, buckled shape and sub-grade reaction of the soil. The obtained results are compared with the existing solutions available from other numerical methods and analytical results. In addition, this paper also uses a recently developed technique, known as the differential transformation (DT) to determine the critical buckling load of fully or partially supported heavy prismatic piles as well as fully supported non-prismatic piles. In solving the problem, governing differential equation is converted to algebraic equations using differential transformation methods (DT) which must be solved together with applied boundary conditions. The symbolic programming package, Mathematica is ideally suitable to solve such recursive equations by considering fairly large number of terms.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.267-275
• /
• 2021

The advent of the "un-tact 2.0 era," described as a "new normal non-face-to-face social relationship," accelerates the transformation of the living paradigm as a fully digital mediated social relationship. The emergence of these new forms of digital behaviors and mediated relationships significantly influences the industry prospect and consumers' individual lives. Advertising has played a decisive role in moving the formation forces of society, creating a dynamic flow of the capitalist system across races and geographical boundaries. Its role will become more fundamental in the physical contactless environment due to the COVID-19 outbreak. Accordingly, advertising has changed and modified its shape and meaning throughout history to adapt to the dynamic external environment. In this article, we illustrated four primary stages of the evolution in the advertising industry from simple advertising to convergence of advertising. Finally, we also identified the challenges of the present advertising industry and the paradigm transformation of "un-tact 2.0" with various related examples.

• Journal of Korean Association for Spatial Structures
• /
• v.20 no.2
• /
• pp.77-85
• /
• 2020

This paper examined the dynamic instability of a shallow arch according to the response characteristics when nearing critical loads. The frequency changing feathers of the time-domain increasing the loads are analyzed using Fast Fourier Transformation (FFT), while the response signal around the critical loads are analyzed using Hilbert-Huang Transformation (HHT). This study reveals that the models with an arch shape of h = 3 or higher exhibit buckling, which is very sensitive to the asymmetric initial conditions. Also, the critical buckling load increases as the shape increases, with its feather varying depending on the asymmetric initial conditions. Decomposition results show the decrease in predominant frequency before the threshold as the load increases, and the predominant period doubles at the critical level. In the vicinity of the critical level, sections rapidly manifest the displacement increase, with the changes in Instantaneous Frequency (IF) and Instant Energy (IE) becoming apparent.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.738-742
• /
• 1996

In the present paper, We have tried to reconfirm the "Interlligent" material properties using both the sintered TiNi/A(1100) matrix composite by powder metallurgy method. By using these specimen, Shape meorystrengthening effect in tensile strengthand fatigue crack propagation above inverse transformation temperature of TiNi fiber were investigated. More over, by SEM obsevation, the effect of the residual stress at the interface between A1 matrix and TiNi fiber and some brittle precipitation layers such as inter metallic compounds on fracture mechanisms was metallurgically discussed.discussed.

• Laser Solutions
• /
• v.3 no.3
• /
• pp.21-29
• /
• 2000

For the direct metal shape processing the powder feed device which is different from the widely used in rapid prototyping. is developed, The three dimensional object is shaped with the melting metal powder. The developed research has applied to rapid prototyping in ultraprecision for MEMS and medical science fields required of rapid manufacture of complex shape. The goal of this study make 3D model which has precision accuracy. Powder spreading apparatus has been more improved because that the control of powder spread is very important in layer manufacturing. It consists of the vibration motor, nozzle and tube which supplies various metal powder. This apparatus could control the spreading velocity that could control powder spreading thickness. Laser on/off switch was adapted because laser scanning velocity must be preserved constantly to prevent heat transformation of laser overheating. The error between sintered thickness md experimental one occurred by shrinkage in sintering melting process. The problem of heat transformation was solved by On/Off switching system.

• ETRI Journal
• /
• v.29 no.5
• /
• pp.655-666
• /
• 2007

There are nodes and edges in a topological map. Node data has been used as a main source of information for the localization of mobile robots. In contrast, edge data is regarded as a minor source of information, and it has been used in an intuitive and heuristic way. However, edge data also can be used as a good source of information and provide a way to use edge data efficiently. For that purpose, we define a data format which describes the shape of an edge. This format is called local generalized Voronoi graph's angle (LGA). However, the LGA is constituted of too many samples; therefore, real time localization cannot be performed. To reduce the number of samples, we propose a compression method which utilizes wavelet transformation. This method abstracts the LGA by key factors using far fewer samples than the LGA. Experiments show that the LGA accurately describes the shape of the edges and that the key factors preserve most information of the LGA while reducing the number of samples.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.815-820
• /
• 2000

The early damage detection of large structures is very important to prevent the disaster due to its global failure. In this paper, a damage detection method of the beam-analogy structure based on the wavelet transformation of mode shape is presented. This can effectively detect the singularity of mode shape caused to the inconsistency of bending moment and shear force at the damaged part using the discrete wavelet and its inverse transforms. To investigate the validity and the applicability of the presented damage detection method, numerical simulation and experiment are carried out for the idealized beam and the real ship structures.

• Korean Journal of Heritage: History & Science
• /
• v.33
• /
• pp.256-273
• /
• 2000

This thesis attempts to investigate the design of the bracket sets(eave-supporters) of Dapo-style architecture(multiple-bracket architecture) in order to discover the change and the characteristic of the Yon-Hwa-Hyong bracket sets. The external shape of eave-supporters has been evolved as following order: Kyo-Du-Hyong, Soe-Seo-Hyong, Cho-Gak-Soe-Seo-Hyong, and Yon-Hwa-Soe-Seo-Hyong. The internal shape has been developed as following order: Kyo-Du-Hyong. Cho-Gak-Hyong and Yon-Hwa-Hyong. Kyo-Du-Hyong represents the 17th century style and Yon-Hwa-Hyong has been used since the mid 18th century. Cho-Gak-Hyong signifies the transformation in the structural and designing role of column section and middle section and there appears a unified aspect in Yon-Hwa-Hyong. The transformation from Kyo-Du-Hyong towards Yon-Hwa-Hyong suggests that this is an intention of symbolizing the Buddhist teachings inside and outside of the eave-supporters. The purpose of this change establishes the Buddhist land.