• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.319-322
• /
• 2008

This paper introduces experimental investigates of an accident pattern for the distributing XLPE cable terminations considering PL law environment. The influence of defects such as thickness and length decrease of XLPE, the impurity on XLPE and the gap between stress-con of housing and semi-conductor on insulating properties of the termination have been studied. The thickness and length decrease of XLPE decrease ac breakdown strengths. Dielectric breakdown traces of XLPE that is damaged by knife displayed other shape. The gap of between housing and semiconductor deteriorates dielectric strength of XLPE seriously.

• Land and Housing Review
• /
• v.1 no.1
• /
• pp.1-7
• /
• 2010

Case-based reasoning (CBR) method can make estimators understand the estimation process more clearly. Thus, CBR is widely used as a methodology for cost estimation. In CBR, the quality of case retrieval affects the relevance of retrieved cases and hence the overall quality of the reminding capability of CBR system. Thus, it is essential to retrieve relevant past cases for establishing a robust CBR system. Case retrieval needs the following tasks to obtain appropriate case(s); indexing, search, and matching (Aamodt and Plaza 1994). However, the previous CBR researches mostly deal with matching process that has limits such as accuracy and efficiency of case retrieval. In order to address this issue, this research presents a CBR cost model for building projects that has two-step retrieval process: decision tree and nearest neighbor methods. Specifically, the proposed cost model has indexing, search and matching modules. Features in the model are divided into shape-based and scale-based attributes. Based on these, decision tree is established for facilitating the search task and nearest neighbor method was utilized for matching task. In regard to applying nearest neighbor method, attribute weights are assigned using GA optimization and similarity is calculated using the principle of distance measuring. Thereafter, the proposed CBR cost model is developed using 174 cases and validated using 12 test cases.

• Land and Housing Review
• /
• v.11 no.4
• /
• pp.105-113
• /
• 2020

In this research, the automated system for 3D modeling and stability evaluation of caisson was developed. It is possible to build a BIM model while examining the stability of the structures to improve the practical use of BIM technology. This study analyzed industry cases and guidelines for caisson stability evaluation and BIM-based modeling. As a result, the data for calculating the stability evaluation of caisson as well as the modeling parameters were derived. In particular, the automated system for 3D modeling, which reflects more than 30 parameters, allows for BIM models for various types of the caisson, such as open-cell caisson, open-cell caisson with uneven, slit caisson, slit caisson with uneven, and curved caisson. The study tested the proposed system using case studies and found that it helps not only to automate the BIM model with various caisson types as parameters but also to make partial shape changes accessible. The study also confirmed that the stability evaluation can be quickly carried out with shapes changed. Finally, the study results suggest that the proposed method should complete the task seven times as fast as the conventional work method.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.11a
• /
• pp.465-470
• /
• 2008

This paper introduces experimental investigates of an electrical accident of the distributing cable termination with simulated badness construction. We prepared two termination kites, one is built-up type, the other is heat contraction type. Also, we manufactured cable termination that have simulated defect by badness construction and measured their insulation characteristics such as ac (35kV, 1min) and impulse (95kV, $1.2{\times}50{\mu}s$) withstand test. The influence of defects such as thickness and the gap between stress-con of housing and semi-conductor on insulating properties of the termination have been studied. The thickness decrease of insulator decreases ac breakdown strength. Dielectric breakdown traces of insulator that is damaged by knife displayed other shape. The gap of between housing and semiconductor deteriorates dielectric strength of insulator seriously.

• Journal of the Korean housing association
• /
• v.21 no.5
• /
• pp.137-144
• /
• 2010

The purpose of this study is to clarify locational characteristics and the road systems of existing 22 old settlements in Cheongju downtown of Korea. These old settlements are classified largely into two types by geographical feature; Hill type located in ridge and Valley type in the valley from the ridge. The Hill type is further categorized into San-rock located on ridge and Gogae located on hillside, and the Valley type into closed large and small valley, that is, Daegok and Sogok by the shape and size of the valley. The road systems are classified into outer road, approaching road, inner road, and side road. In San-rock type villages, Inner road is changed side roads by new arterial road, and new ones become inner road. The outer road are almost cut off, but side roads maintain. In the case of the Gogae type, main road becomes inner road, maintain old hierarchical road, and in other cases, villages are formed around side roads derived from main road, and outer road and inner road are cut off. Among the Valley type, Daegok type maintains old hierarchical road, while for Sogok type, outer roads are cut off, and new roads are outer road.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.6
• /
• pp.64-74
• /
• 2008

The flaw around a ROV (Remotely Operated Vehicle) has been numerically investigated to improve resistance performance by modifying the hull form of the ROV. For the base hull form considered in this study, the form drag rather than the friction drag is dominant to the total drag Subsequently, the surfaces on which the local pressure highly acts have been modified to produce the streamlined-shape. Based on the surface modification, seven different hull forms have been chosen as candidates for drag reduction. Among the candidates, the semi-sphericalized housing and the streamlined-bow achieved greatest drag reduction comparing with the others. Consequently, the hull form combined with the semi-sphericalized housing and the streamlined-bow gave approximately 17% drag reduction at the design velocity of 3 knots.

• Journal of the Korean housing association
• /
• v.14 no.6
• /
• pp.125-133
• /
• 2003

The purpose of this study is to reveal the characteristics of Kan as a compositional unit in relation with its usage, building base, structural system, and roofing system in Seo Baek Dang and Gwan Ga Jeong. The results are as follows： Seo Baek Dang and Gwan Ga Jeong share a common characteristics： Kan module forms the plan to be 1：1 in shape and enables flexibility in usage and regularity in compositional aspect. In Seo Baek Dang, there are active level differences in base, room floor levels and column heights to achieve intended roof design while minimizing the deviation of module (500 mm) of four sides enclosing the an-madang (inner courtyard) and, in Gwan Ga Jeong, instead of differentiating levels, maximizing the module control (up to 1,560 mm) and lowering the roof slope are found. They are regarded resulting in a rather plane manner. Through a comparative analysis, it is found out that these two houses have a common characteristics of Kan to form a quadrate plan while they have differences both in conceptual and tectonic manner that is 'how to build a house' in similar conditions of region, period and society. In addition, Kan as a module is clarified to have a relative value that regulates both structural and aesthetical aspects.

• Land and Housing Review
• /
• v.10 no.2
• /
• pp.53-58
• /
• 2019

Particulate matter (PM) is designated as a group 1 carcinogen by the International Agency for Research on Cancer (IARC) of the World Health Organization (WHO). In South Korea, the health threat caused by PM is the most serious level internationally. Therefore, in order to solve the urban PM problem, it is important to develop the technology that can control PM efficiently. In this study, CFD(Computational Fluid Dynamics) simulation was performed for PM pre-filter (type 1-3 with different PM collecting room) to develop a high-efficiency PM collecting device. The complex flow field and the local flow phenomenon inside the PM collecting device were understood with CFD simulation by changing the shape and size of the pre-filter. The PM removal performance can be described with flow rate through the device and PM removal efficiency. The type-1 pre-filter with 5x5 size collecting room was confirmed to have the highest efficiency. Based on the analysis results, the optimal type of pre-filter could be developed and it would be applied as an element technology included in the PM collecting device.

• Journal of architectural history
• /
• v.18 no.3
• /
• pp.7-25
• /
• 2009

Hakbongjongtaek(The head house of Uisong Kim family, 鶴峯宗宅), firstly built in the early 17th century, was moved to its neighboring place in the late 18th century. The man who led the relocation(移建) of the house was the eldest grandson of the family, Jong-soo, Kim. He made and overall plan and also participated in building the house. There remain four Gados(family paintings, 가도(家圖)) related to the relocation plan. This paper aims to make an analysis of these Gados, and through analysis, to find what was the essential poing of the relocation plan and how the point was represented in the paintings. The result of analysis is as follows: 1. The main focus of relocation plan was the form of Anchae(the inner house). Anchae was designed as asymmetrical form, and restricted to four kan. Only Andaechung needed to be 6 kan size for religious ceremonies. 2. For the design of Sarangchae, the displacement of large Sarangbang and small Sarangbang was an important issue. There were two ways of layout: parallel type and facing type. The latter was chosen. 3. The representation and techniques of Gado is quite concrete, in spite of differences among them. The expression of doors, windows, attic and kitchen was based on the understanding of space. Also the spatial division, which was expressed line on the grid, was based on the scaled ruler. As we've seen before, painting the relocation plan was a kind of endeavors to make the housing type as a realization of Garye. Also, we can find out that role of the eldest grandson of the family was quite important to carry out the plan. As well as, it was meaningful to examine Sadaebu (the aristocrat of Chosun)'s perception of housing.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.2
• /
• pp.135-140
• /
• 2020

An experimental study was conducted using the tracking wheel test (IEC 62217) method for evaluating the performance of insulator materials, in particular ethylene propylene diene monomer (EPDM) and silicone rubber. In addition, we studied the tracking characteristics resulting from applying the same method for the shape of the insulator housing, that is, the performance of regular and alternating sheds. The evaluation parameters were leakage current, surface characteristics, SEM, EDX, hydrophobicity, and temperature distribution; likewise, we applied the commercial frequency dry (and wet) flashover voltage test. We found that the regular shed had a greater leakage current than the alternating shed and that the recovery of the hydrophobicity in terms of rest time was greater than that of the EPDM in terms of leakage current. All of the regular-shed insulators of silicone rubber had tracking traces and choking on the sheath parting line, while the alternating shed showed only choking at the interface but no tracking traces. Therefore, it can be concluded that the commercial frequency wet flashover voltage of the silicone rubber with regular shed before and after the tracking wheel test is higher than that of the alternating shed.