• 한국분말재료학회지
• /
• 제20권3호
• /
• pp.186-190
• /
• 2013

The electrochemical performance for the corrosion of zinc anodes according to particle size and shape as anode in Zn/air batteries was study. We prepared five samples of Zn powder with different particle size and morphology. For analysis the particle size of theme, we measured particle size analysis (PSA). As the result, sample (e) had smaller particle size with $10.334{\mu}m$ than others. For measuring the electrochemical performance of them, we measured the cyclic voltammetry and linear polarization in three electrode system (half-cell). For measuring the morphology change of them before and after cyclic voltammetry, we measured Field Emission Scanning Electron Microscope (FE-SEM). From the cyclic voltammetry, as the zinc powder had small size, we knew that it had large diffusion coefficient. From the linear polarization, as the zinc powder had small size, it was a good state with high polarization resistance as anode in Zn/air batteries. From the SEM images, the particle size had increased due to the dendrite formation after cyclic voltammetry. Therefore, the sample (e) with small size would have the best electrochemical performance between these samples.

• 한국재료학회지
• /
• 제21권11호
• /
• pp.604-610
• /
• 2011

The effect of $BaF_2$ flux in $Y_3Al_5O_{12}:Ce^{3+}$(YAG:Ce) formation was investigated. Phase transformation of $Y_3Al_5O_{12}$(YAG) was characterized by using XRD, SEM, and TEM-EDS, and it was revealed that the sequential formation of the $Y_4Al_2O_9$(YAM), $YAlO_3$(YAP) and $Y_3Al_5O_{12}$(YAG) in the temperature range of 1000-1500$^{\circ}C$. Single phase of YAG was revealed from 1300$^{\circ}C$. In order to find out the effect of $BaF_2$ flux, three modeling experiments between starting materials (1.5$Al_2O_3$-2.5$Y_2O_3$, $Y_2O_3$-$BaF_2$, and $Al_2O_3$-$BaF_2$) were done. These modeling experiments showed that the nucleation process occurs via the dissolution-precipitation mechanism, whereas the grain growth process is controlled via the liquid-phase diffusion route. YAG:Ce phosphor particles prepared using a proposed technique exhibit a spherical shape, high crystallinity, and an emission intensity. According to the experimental results conducted in this investigation, 5% of $BaF_2$ was the best concentration for physical, chemical and optical properties of $Y_3Al_5O_{12}:Ce^{3+}$(YAG:Ce) that is approximately 10-15% greater than that of commercial phosphor powder.

• 한국분말재료학회지
• /
• 제6권3호
• /
• pp.215-223
• /
• 1999

The synthesis of $Ni_5Si_2,\;Ni_2Si$ and NiSi has been investigated by mechanical alloying (MA) of Ni-27.9at%Si, Ni-33.3at%Si and Ni-50.0at%Si powder mixtures. As-received and premilled elemental powders were subjected to MA. The as-received Ni powder was spherical and the mean particle size 48.8$\mu$m, whereas the premilled Ni powder was flaky and the mean particle diameter and thickness were found to be 125 and 5$\mu$m, respectively. The mean surface area of the premilled Mi powder particle was 3.5 times as large as that of the as-received Ni powder particle. The as-received Si powder was was 10.0$\mu$m. Self-propagating high-temperature synthesis (SHS) reaction, followed by a slow reaction (a solid state diffusion), was observed to produce each Ni silicide during MA of the as-received elemental powders. In other word , the reactants and product coexisted for a long period of MA of time. Only SHS reaction was, however, observed to produce each Ni silicide during MA of the premilled elemental powders, indicating that each Ni sillicide formed rather abruptly at a short period of MA time. The mechanisms and reaction rates for the formation of the Ni silicides appeared to be influenced by the elemental powder particle size and shape as well as the heat of formation of the products $(Ni_5Si_2$longrightarrow-43.1kJ/mol.at., $Ni_2Si$$\rightarrow$-47.6kJ/mol.at.).

• 한국분말재료학회지
• /
• 제12권6호
• /
• pp.447-452
• /
• 2005

The synthesis and consolidation of titanium silicide by electro-discharge-sintering has been investigated. As-received Ti powder was in flaky shape and the mean particle size was $45.0{\mu}m$, whereas the mean particle size of the pre-milled Si powder with angular shape was $8.0{\mu}m$. Single pulse of 2.5 to 5.0 kJ/0.34g-elemental Ti and pre-milled Si powder mixture with the composition of $Ti-37.5at.\%$ Si was applied using $300{\mu}F$ capacitor. The solid with $Ti_5Si_3$ phase has been successfully fabricated by the discharge with the input energy more than 2.5kJ in less than $129{\mu}sec.$ Hv values were found to be higher than $1000kgf/mm^2$. The formation of $Ti_5Si_3$ occurred through a fast solid state diffusion reaction.

• 복식문화연구
• /
• 제14권5호
• /
• pp.864-875
• /
• 2006

The characteristics of the demographics in Korea as it gets older are the increase of Elderly Women and continuous progress in urbanization. In this study, body shapes are classified as standard, obese, and tiny according to the previous studies based on the body shape characteristics and the body measurement of the Elderly Women. Based on the classification, we developed prototype of the panty for the Elderly Women to provide basic materials for the quality enhancement of the clothing of the increasing Elderly Women. The followings are the result of the study. 1. To categorize the body shapes of the Elderly Women focusing on the lower half, we grouped the target subjects using the nested approach by the average standard deviation and the factor analysis minimal diffusion method. Accordingly, type 1 and 2 had 36 members respectively and type 3 had 43 members. In this study, two Elderly Women subjects with standard body shape falling under the type 1 were selected as the subjects. 2. In the second trial evaluation for the prototype panty for the Elderly Women 32 items for appearance test and 3 items for functional test were evaluated. The scores in leg, sideline and hip were shown high and the balance between the parts was maintained very well. In the functional test, the panty used to be too tight for the leg curve but in the second trial it was improved, too. In each item, the second trial test showed better score than the first trial test. Conclusively, the most optimal panty prototype for the Elderly Women was proposed according to the trial test result.

• 대한화학회지
• /
• 제37권3호
• /
• pp.317-326
• /
• 1993

변형된 ZSM-5 제올라이트 촉매에서 톨루엔의 n-프로필알코올에 대한 산촉매 반응이 조사되었고, 이알킬벤젠 이성질체들의 100$^{\circ}C$에서의 흡착 실험이 수행되었다. 4-프로필암모늄이온, 알루민산나트륨, 콜로이달실리카 등으로부터 수열반응에 의하여 ZSM-5가 합성되었으며, H-, K-, Sr-, P-Mg-HZSM-5, H-Y 및 H-모더나이트 등이 전통적인 방법에 의하여 만들어졌다. HZSM-5에서 톨루엔의 n-프로필알코올에 의한 주반응생성물은 크실렌, 프로필톨루엔 뿐만 아니라 에틸톨루엔을 포함하며, P-Mg-HZSM-5에서는 이알킬벤젠 이성질체중 높은 파라 선택성이 얻어졌다. 다양한 p-이성질체들의 확산계수는 1 ${times}$ 10$^{-10}$ cm$^2$/sec로 일정했으며 o-이성질체보다 m-이성질체가 10배 이상 느리게 나타났다. 이들 반응 및 흡착특성이 제올라이트의 세공구조에 의한 형상 선택성, 제올라이트의 산성도 등의 관점에서 해석되었다.

• 복식문화연구
• /
• 제15권5호
• /
• pp.737-748
• /
• 2007

Korea is now entering into aging society next to Japan in Asia, which is considered as unusual in the semi-developed countries. More than 50 year-old consumer market is anticipated to grow to 28.7% of the total in 2010 from 20.4% in 2000. In particular, the silver market is estimated to be formed in full range in 2010 when the generation born in 50s and 60s after the Korean War start to retire. In this study, body shapes are classified as standard, obese, and tiny according to the previous studies based on the body shape characteristics and the body measurement of the Elderly Women. Based on the classification, we developed pattern of the panty for the obese Elderly Women to provide basic materials for the quality enhancement of the clothing of the increasing Elderly Women. The followings are the result of the study 1. To categorize the body shapes of the Elderly Women focusing on the lower half, we grouped the target subjects using the nested approach by the average standard deviation and the factor analysis minimal diffusion method. Accordingly, type 1 and 2 had 36 members respectively and type 3 had 43 members. In this study, two Elderly Women subjects with standard body shape falling under the type 1 were selected as the subjects. 2. In the second trial evaluation for the panty pattern for the Elderly Women 32 items for appearance test and 3 items for functional test were evaluated. The scores in leg, sideline and hip were shown high and the balance between the parts was maintained very well. In the functional test, the panty used to be too tight for the leg curve but in the second trial it was improved, too. In each item, the second trial test showed better score than the first trial test. Conclusively, the most optimal panty prototype for the Elderly Women was proposed according to the trial test result.

• 마이크로전자및패키징학회지
• /
• 제6권3호
• /
• pp.9-18
• /
• 1999

본 연구에서는 융점 이상에서의 유지시간에 따른 Sn-3.5Ag 및 Sn-37Pb 공정솔더볼과 Au/Ni/Cu 기판 사이의 야금학적 특성을 고찰하였다. 현재 상용되는 리플로 솔더링 장비를 사용하여, 최고 솔더링 온도와 Conveyor 속도를 변화시킴으로써 융점이상에서의 유지시간을 측정하였다. 결과로서 접합부 계면에서 스캘럽 형태의 $Ni_3Sn_4$금속간화합물이 형성되었고, Cu-Sn계 화합물은 관찰되지 않았다. Ni층이 Cu의 확산 장벽으로 작용하였다. 최고 솔더링 온도가 증가함에 따라 금속간화합물 층의 두께가 최고 2.2$\mu\textrm{m}$까지 성장하였다. 스캘럽의 형상은 반구형에서 지름이 더 작은 볼록한 형상으로 변하게 된다. 접합부의 미세경도값은 Sn-3.5Ag와 Sn-37Pb의 공정조직이 성장함에 따라 감소하였다.

• 분석과학
• /
• 제10권6호
• /
• pp.418-426
• /
• 1997

고주파를 이용한 오니의 건조특성에 대하여 살펴보고 재래식 건조특성과 비교 분석하였다. 고주파 건조는 빠른 속도와 높은 효율을 보였다. 재래식 건조에서는 항율건조기간이 나타나지 않았고 수분은 모세관현상에 의하여 이동하였다. 오니의 수분 중 자유수와 결합수는 존재하지 않았다. 고주파 건조에서 감율건조기간이 두 부분으로 나타났으며, 수분의 이동은 확산에 의하여 일어났다. 증발 표면적이 커질수록 수분의 제거가 촉진되었고, 오니의 지름이 커질수록 넓은 범위의 항율건조 기간이 나타났으며, 모양에 따라서도 건조특성이 다르게 나타났다. 고주파 건조에서는 오니의 중심부에서 가장 먼저 온도가 상승하였으며, 항율건조기간에서 $80{\sim}100^{\circ}C$로 일정하게 유지되면서 가장 높았다.

• 한국산업보건학회지
• /
• 제25권1호
• /
• pp.36-44
• /
• 2015

Objectives: This study aimed to elucidate the physicochemical properties of silica powder and airborne particles as by-products generated from fabrication processes to reduce unknown risk factors in the semiconductor manufacturing work environment. Materials and Methods: Sampling was conducted at 200 mm and 300 mm semiconductor wafer fabrication facilities. Thirty-two powder and airborne by-product samples, diffusion(10), chemical vapor deposition(10), chemical mechanical polishing(5), clean(5), etch process(2), were collected from inner chamber parts from process and 1st scrubber equipment during maintenance and process operation. The chemical composition, size, shape, and crystal structure of silica by-product particles were determined by using scanning electron microscopy and transmission electron microscopy techniques equipped with energy dispersive spectroscopy, and x-ray diffractometry. Results: All powder and airborne particle samples were composed of oxygen(O) and silicon(Si), which means silica particle. The by-product particles were nearly spherical $SiO_2$ and the particle size ranged 25 nm to $50{\mu}m$, and most of the particles were usually agglomerated within a particle size range from approximately 25 nm to 500 nm. In addition, the crystal structure of the silica powder particles was found to be an amorphous silica. Conclusions: The silica by-product particles generated from the semiconductor manufacturing processes are amorphous $SiO_2$, which is considered a less toxic form. These results should provide useful information for alternative strategies to improve the work environment and workers' health.