• Journal of Soil and Groundwater Environment
• /
• v.11 no.3
• /
• pp.52-58
• /
• 2006

Kim and Lee (2005) suggested Minimum Entropy Deconvolution (MED) to estimate the temporal sequence of the relative recharge. However this study by Kim and Lee (2005) was just related to the verification of the conceptual approach with MED. In this study, we try to characterize the applicability of MED in the case of spatially heterogeneous recharge (distance from recharge area). Simulated results were recorded with some specific sampling points. Estimated results from this study show higher than 0.8 in cross-correlation with the original recharge sequence. In addition, the physical and mathematical meanings of the applied filter length was also investigated. It was revealed that the length of filter is highly related to the spatial distance between recharge area and the monitoring site, and the apparent shape of hydraulic head change.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.1
• /
• pp.105-119
• /
• 2008

In steel deck bridges suffering directly on wheel load according to the number of serviced years, the occurrence of fatigue cracks increases in structural details, which includes the cross section parts of the longitudinal rib and transversal rib, and so on. Through the control method for these fatigue cracks the increased thickness of the steel deck plate or the application of retrofit detail to the inside of the longitudinal rib was observed to be effective. This study suggests structural details for the retrofitted and non-retrofitted longitudinal rib. The target details in this study are the connection parts of the lo ngitudinal and transversal rib, and the slit parts of transverse rib where fatigue cracks were frequently reported in previous studies. In the analyses, detailed structural analyses were performed as parameters, which include the shape, change of size and attached position. From the results the stress reduction in the target details was observed to be larger in the retroffited details. Also, the improvement of fatigue strength is more effective in the retrofitted details with the vertical rib than the bulkhead plate.

• Archives of Plastic Surgery
• /
• v.38 no.4
• /
• pp.408-414
• /
• 2011

Purpose: To correct breast ptosis, reduction mammoplasty and mastopexy have been developed in a way that minimizes complications. Recently, as the mean age of breast cancer occurrence is decreasing, the need for breast reconstruction in patients with breast cancer is rising. If mastopexy is performed with breast reconstruction at the same time, the size of the normal breast and the new one is not quite different. We decided to apply Z-plasty, which is a widely-used technique in plastic surgery to lengthen or change the direction of tension of the tissue. Methods: From March 2008 to December 2009, we performed breast reconstruction in 6 patients with breast cancer and scar contracture. After breast reconstruction, mastopexy with Z-plasty was applied to correct the asymmetry. The new nipple-areolar complex is placed on the line connecting the midclavicle and the current nipple. The inferior border of the new areola corresponds with the inferior border of the original areola, and the superior border about 2 cm upward the original superior border. We drew two oblique lines connecting the medial end of the incision line lower to the nipple-areola complex and the lateral end of the inframammary fold for Z-plasty. The excess tissue between these two lines was removed and the new triangular flaps were put together. Results: The average age of patients was 42.6 years, aged from 36.1 to 48.1 The weight of removed tissue was between 54g and 95 g, with the mean of 74 g. The average distance from the midclavicle to the nipple was 24 cm before surgery, and 21 cm after the surgery. The average operation time per patient (1 mastopexy) was 45 minutes, and the patients were satisfied with the size and shape. Conclusion: Applying Z-plasty for the mastopexy on the normal breast ptosis is a relatively simple way to achieve symmetry in patients who need breast reconstruction.

• Journal of Technology Innovation
• /
• v.17 no.2
• /
• pp.109-130
• /
• 2009

As recently the interest in the future industry grows high, the demand for forecasting the future shape of science and technology, especially exploring 'weak signals' of changes in science and technology, increases as well. The 'weak signals' means that currently they are uncertain and abnormal signals, but are preliminary signals which might lead future changes. Accordingly they can provide important clues to the future forecast. The study of 'weak signals' has its significance in providing important clues to the projection of the future technology earlier. As it has not a long history from its concept to exploration methods to utilization, more intensive study is required. Exploring 'weak signals' has been conducted mainly through the information analysis by experts with a high level of intelligence and sense. However, such an analysis is difficult and broad in scope, and furthermore the interpretation of analysis results is very limited, relying primarily on the decision of experts themselves. The purpose of this study is to provide a more objectified way to support these expert-based tasks. It derives quantitative results from non-structured article information and provides a logical basis for detecting the signals based on the results.

• Korean Journal of Veterinary Research
• /
• v.36 no.4
• /
• pp.873-886
• /
• 1996

For better understanding the interrelationship of hemorrhage and aggregation mechanism, cyclopiazonic acid(CPA) known as promoting the aggregation of platelet, aflatoxin $B_1(AFB_1)$ inhibiting platelet aggregation were used as toxic mycotoxins in these studies. In order to investigate the potential role of prostaglandin metabolism on the platelet aggregation, a variety of prostaglandin metabolites such as $PGF_{2{\alpha}}$, $PGE_2$ and $TXB_2$ were measured in homogenized rabbit platelets by TLC and LSC. And the role of $Ca^{{+}{+}}$ on the platelet aggregation was investigated by flow cytometer. Finally, the morphological effects of mycotoxins on platelet were determined by transmission electron microscope. The results and conclusions obtained from these studies are: 1) CPA induced no changes but $AFB_1$ increased $PGE_2$ and $TXB_2$. 2) CPA promoted ADP, collagen, thrombin, A.A., and PAF-induced $Ca^{{+}{+}}$ release. $AFB_1$, however, decreased $Ca^{{+}{+}}$ level except collagen-induced $Ca^{{+}{+}}$ release. When the calcium blocker, verapamil, was used, CPA decreased thrombin-induced $Ca^{{+}{+}}$ release and increased collagen, ADP, PAF and A.A.-induced $Ca^{{+}{+}}$ release. $AFB_1$ in contrast decreased the all factors induced $Ca^{{+}{+}}$ release. 3) $AFB_1$ did not induce any ultrastructural changes except large vacuole formation in a few platelets. And CPA also did not induce any changes except moderate shape change, indicator of platelet activation. In conclusion, CPA promoted platelet aggregation by the increases of $Ca^{{+}{+}}$ release but had no changes in A.A. metabolites. Antiaggregating effects of $AFB_1$ may be due to decreases of $Ca^{{+}{+}}$ release and increases of $PGE_2$ and $PGF_{2{\alpha}}$ formation. These data provide the basis for the future study of mobilization and function of $Ca^{{+}{+}}$ in platelet aggregation.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.90-95
• /
• 2014

Nylon66 extrudates as a function of the extrusion number were prepared by a twin screw extruder. Chemical structures, thermal properties, melt index, crystal structures, mechanical properties such as the tensile strength, elongation at break and impact strength, and rheological property were measured by FT-IR, $^1H$-NMR, melt indexer, DSC, TGA, XRD, universal tensile tester, Izod impact tester, and rheometer. FT-IR and $^1H$-NMR characterizations indicated that the number of extrusions did not affect the chemical structure. The decrease in the molecular weight was checked by the melt index of extrudates. There were no effects of the thermal history on the melting and degradation temperature. The tensile and impact strength and modulus were found to be similar, regardless of the number of extrusions, but the elongation decreased significantly. The complex viscosity of extrudates at low frequencies decreased with the extrusion number. No structural changes after extrusion were confirmed from the fact that there was no change in the slope and shape of G'-G" plot.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.5_6
• /
• pp.297-304
• /
• 2004

In this paper, a mesh simplification algorithm based on wavelet transform and 2D planar sampling is proposed for efficient handling of 3D objects in computer applications. Since 3D vertices are directly transformed with wavelets in conventional mesh compression and simplification algorithms, it is difficult to solve tiling optimization problems which reconnect vertices into faces in the synthesis stage highly demanding vertex connectivities. However, a 3D mesh is sampled onto 2D planes and 2D polygons on the planes are independently simplified in the proposed algorithm. Accordingly, the transform of 2D polygons is very tractable and their connection information Is replaced with a sequence of vertices. The vertex sequence of the 2D polygons on each plane is analyzed with wavelets and the transformed data are simplified by removing small wavelet coefficients which are not dominant in the subjective quality of its shape. Therefore, the proposed algorithm is able to change the mesh level-of-detail simply by controlling the distance of 2D sampling planes and the selective removal of wavelet coefficients. Experimental results show that the proposed algorithm is a simple and efficient simplification technique with less external distortion.

• Journal of Legislation Research
• /
• no.44
• /
• pp.7-31
• /
• 2013

Paradigm of Global economy is changing to creative economy. This study focuses on the role of creative economy to clarify (understand clearly) the impact (influence) which transition of economy system will bring about. The creative economy is basically came from New economy theory. According to the New economy theory, a state can achieve sustainable growth without an inflation, or higher growth rate under given inflation rate, through an investment on ICT. However, different from America, Korea had limited effect of New Economy. This is because Korean economy had factor-input driven growth model rather than New Economy mechanism. However, ICT is essential requirement to move toward New Economy(Digital Economy), it does not sufficiently explain the increase of productivity and economic growth. A crucial point to realize New economy is how to diffuse and spill over the technology development on ICT sector to other industry. ICT is not creative industry or creative economy per se, and it should play as an enabler to improve other industry's productivity. The creative economy can be understood as an extension of New Economy theory. It means the economy that creates values by cultural assets and human resource, as well as capital and labor factors. However, if we understand the meaning of creative economy as change of input factors, it is hard to bring real shape of creative economy.

• Tunnel and Underground Space
• /
• v.29 no.5
• /
• pp.346-355
• /
• 2019

When evaluating pillar stability in very closely spaced tunnels, a local safety factor (strength/stress ratio) at the minimum width has been widely used. Tension bolts have been frequently applied as reinforcement for the cases where safety factors are less than 1.0 from FEM stress analysis. However, the local safety factor shows a constant value irrespective of the change in pillar width/tunnel diameter (PW/D) and the safety factor of the pillar is underestimated because the variation of deviation stress is relatively small even when the pre-stressing is applied to the tension bolt. In addition, the average safety factor proposed by Hoek and Brown(1980) was reviewed, but the pillar safety factor was relatively overestimated when the width of the pillar was increased. As an alternative, the SRM safety factor using shear strength reduction method shows the effect of changing the safety factor in the case of no reinforcement and tension bolt reinforcement as the pillar width/tunnel diameter(PW/D) changes. The failure shape is also similar to the previous limit theory result. In this study, the safety factor was evaluated without considering rock bolt and shotcrete to distinguish reinforcing effect of tension bolt.

• Polymer(Korea)
• /
• v.33 no.2
• /
• pp.144-152
• /
• 2009

The thermal and optical properties of poly {1-(cholesteryloxycarbonylalkanoyloxy) ethylene}s (PCALEn, n=2$\sim$8,10, the number of methylene units in the spacer) were investigated. All of the homologues formed monotropic cholesteric phases with left-handed helical structures. PCALEn with n=2 or 10, in constrast with PCALEn with $3{\leq}n{\leq}8$, did not display reflection colors over the full cholesteric range, suggesting that the helical twisting power of the cholesteryl group highly depends on the length of the spacer connecting the cholesteryl group to the polyethylene chain. The glass transition temperatures decreased with increasing n. The isotropic-cholesteric phase transition temperatures decreased with increasing n up to 7 and showed an odd-even effect. However it became almost constant when n is more than 7. This behavior is rationalized in terms of the change in the average shape of the side chain on varing the parity of the spacer. This rationalization also accounts for the observed variation of the entropy gain for the clearing transition. The thermal stability and degree of order in the mesophase and the temperature dependence of the optical pitch observed for PCALEn were significantly different from those reported for cellulose tri(cholesteryloxycarbonyl)alkanoates. The results were discussed in terms of the differences in the chemical structure and flexibility of main chain and the number of the mesogenic units per repeating unit.