• Journal of Korean Society of Forest Science
• /
• v.84 no.2
• /
• pp.239-246
• /
• 1995

This research aimed at the contribution to obtaining the scientifical data which were required for planning she environmentally sound and sustainable management, particularly in the field of the logging road construction. Main natural environmental variables including natural vegetation, rainfall, soil runoff were measured in the logging road on-sites and analysed. This project was carried out at the (mt.)Paekunsan Research sorest of Seoul National University, located in Gwangyang, Chollanam-do in southern part of Korea, from 1993 to 1994. 1. The explanatory variables for erosion and sedimentation on logging road surface were accumulated rainfall, erosion distance, cross-sectional gradient, and soil hardness. The erosion and sedimentation on logging road was increasing positively in proportion to the accumulated rainfall, soil distance from starting point of the logging road, and cross-sectional gradient. 2. On cut-slope of logging road, cut-slope shape, part of the slope, plant coverage, soil hardness, sand content, accumulated rainfall, clay content, and silt content were effective factors. Cut-slope erosion and sedimentation on logging roam increased as with the lower plant coverage, the lower accumulated rainfall, the high sand content in the soil. 3. On fill-slope of logging road, there were three significant variables such as total rainfall and number of rainfall-storm. Fill-slope erosion and sedimentation had a positive correlation with the amount of rainfall, the number of rainfall, the soil hardness. 4. The total erosion and sedimentation on logging road were $5.04{\times}10^{-2}m^2/m^2$ in logging road construction year, $7.37{\times}10^{-2}m^2/m^2$ in next year. The erosion and sedimentation on logging road surface were 32.7% of total erosion and sedimentation on Logging road in construction year, and 57.1% in next year, respectively. The erosion and sedimentation on cut-slopes were 30.4% on logging road in construction year, fill-slopes of total erosion and sedimentation and 21.0% in next year, respectively. The erosion and sedimentation on fill-slopes were 36.9% on logging road in construction year, 21.9 in next year. To decrease the erosion and sedimentation at the logging road from the beginning stage of construction, the effective revegetation works should be implemented on the cut-slope and fill slopes, and erosion control measures such as optima. road design must be constructed on read surface.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.11 no.1
• /
• pp.29-42
• /
• 1987

This study was an attempt to survey, the relationships between women's values and preference in clothing design. For the measurement of values scale was to relect the theoretical, economic aesthetic, social. political and religious values explained by Allport-vernon- Lindzey. The preference rate in clothing design consisted of 50 items and 3 factors including color, form and texture. The questionnaire were administered to a sample of women (between college students and adult) who lined in Seoul, Korea. The date for 910 respondents were analyzed by person's carrelation coefficient, to-test and $x^2$ test. Through this study, the followings were founds; 1. Aesthetic value was the mast important of female college students values and economic value was the most important of adult's values. 2. There were significant relation between values and the preference for clothing form in line and style; 1) In line preference, adult women indicated negative correlation with religious values but positive correlation with aesthetic and political values. 2) In style preference, adult women indicated negative correlation with economic values positive correlation with social values, for female college students indicated positive correlation with aesthetic social and political values. 3. There were significant relation between values and preference for texture in touch, thickness, weight, light and luster; 1) In relationship between texture and values, adult women indicated touchness preference negative correlation with theoretical and religious values, for female college students indicated positive correlation with aesthetic and social values. 2) In thickness preference adult women indicated negative correlation with theoretical values but female college students indicated positive correlation with political values. 3) In weight preference, adult women indicated negative correlation with theoretical values. But female college students indicated positive correlation with religious values. 4) In brightness preference, only adult women indicated positive correlation with social values, negative correlation with economic values. In transparency preference, adult women indicated positive correlation with aesthetic values, negative correlation with religious values. 4. There were significant correlation among color and economic, aesthetic; political and religious values, that is, evacuation and economic political values in adult women there were positive correlation with religious values in female students. 1) In chroma only adult women indicated negative correlation with religious values. In warm and cold, positive correlation with economic values in both of them. 2) In coloration, adult women like a complement color indicated negative correlation with aesthetic values, but positive correlation with political values. 5. There were significant differences in the preference of clothing design between female college students and adult women; correlationship with color variables. Evacuation, both of them indicated negative correlation with chroma positive correlation with warm and cold and coloration. In chroma, adult women indicated negative correlation with coloration and warm and cold, for female students indicated negative correlation with coloration. 6. Comparison with clothing preference: 1) In color preference, adult women liked the most white, brown, blue and black in sequence. Female college students liked the most white, also the next is blue and pink. 2) Clothing design preference, there was significant difference in warm and cold and coloration, adult women more liked than female students. In shape of clothing, both of them indicated significant difference in line and style, female students more liked sporty style. In texture, adult women more liked soft thin light weight and bright. 3) In silhouette preference, the most is H-line, female college students more liked.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.2
• /
• pp.81-94
• /
• 2005

The purpose of this study is to test the applicability of landscape metrics for quantifying and monitoring the landscape structure in the Geumho River watershed, which has undergone heavy environmental disturbances. Landscape metrics were computed from land cover maps(1985, 1999) for the forest patches. The number of variables were reduced from 12 metrics to 3 factors through factor analysis. These factors accounted for above 91% of the variation in the original metrics. We also determined the relative effects of land development on the changes of forest landscape structure using multiple linear regression analysis. At the forest patches, the conversion of forest to urban areas and agriculture resulted in increased fragmentation. Patch area and patch size decreased. and patch density increased as a result of the conversion of forest to agriculture($R^2=0.696$, p<0.01). The heterogeneity of patch size and complexity of patch shape mainly decreased as a result of the conversion of forest to urban areas($R^2=0.405$, p<0.01). The density of core area and edge showed the tendency increase, but there was no relationship with the conversion of forest to urban area and agriculture The future research will be needed to analyze correlations between landscape structures and specific environmental and socioeconomic landscape functions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.138-145
• /
• 2017

The purpose of this study is to establish a reasonable analytical method for the estimation of overall behavior characteristic from cracking to yielding of rebar and crushing of concrete and seismic performance of reinforced concrete shear wall with high-strength reinforcing bar. A total of 8 specimens of reinforced concrete walls which have constant aspect ratio and a variety of variables such as reinforcement ratio, reinforcement yielding strength, reinforcement details, concrete design strength, section shape and whether lateral restraint hoop were selected and the analysis was performed by using a non-linear finite element analysis program (RCAHEST) applying the proposed constitutive equation by the authors. The mean and coefficient of variation for maximum load from the experiment and analysis results was predicted 1.04 and 8%. The mean and coefficient of variation for displacement corresponding maximum load from the experiment and analysis results was predicted 1.17 and 19% respectively. The analytical results were predicted relatively well the fracture mode and the overall behavior until fracture for all specimens. These results are expected to be used as basic data for application of high-strength reinforcing bar to design codes in the future.

• Journal of the Korea Concrete Institute
• /
• v.13 no.6
• /
• pp.619-628
• /
• 2001

In building construction, openings of the story-height deep beams are usually required for accessibility and service lines such as air conditioning ducts, drain pipes and electric units. It is known that the main parameters affecting the load bearing capacity of deep beams with web openings are size, shape, location and reinforcements of openings. However, there have been no pertinent theories and national design codes for predicting ultimate shear strength of reinforced concrete deep beams with web openings. In this study, the shear behavior of simply supported reinforced concrete deep beams with web openings subject to concentrated loads has been scrutinized experimentally. A total of 34 specimens, the geometry of openings, its reinforcements and shear span to depth ratio, being taken as the experimental variables, has been cast and tested in the laboratory. The effects of these structural parameters on the shear strength and crack initiation and propagation have been carefully checked and analyzed. From the tests, it has been observed that the failures of all specimens were due to shear mechanism and the ultimate strength of specimens varies according to the location of openings, by which the formation of compression struts between the loading points and supports are deterred. All of the test results of specimens have been compared with the formulas proposed by previous researchers. The results were closely coincident with the formulas given by Ray and Kong's equation except for some X series specimens having a larger dimension of openings beyond the geometric limits of proposed equations.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.1
• /
• pp.31-40
• /
• 2017

Absolute nodal coordinate formulation was developed in the mid-1990s, and is used in the flexible dynamic analysis. In the process of deriving the equation of motion, if the order of polynomial referring to the displacement field increases, then the degrees of freedom increase, as well as the analysis time increases. Therefore, in this study, the primary objective was to reduce the analysis time by transforming the dimensional equation of motion to a non-dimensional equation of motion. After the shape function was rearranged to be non-dimensional and the nodal coordinate was rearranged to be in length dimension, the non-dimensional mass matrix, stiffness matrix, and conservative force was derived from the non-dimensional variables. The verification and efficiency of this non-dimensional equation of motion was performed using two examples; cantilever beam which has the exact solution about static deflection and flexible pendulum.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.577-582
• /
• 2020

Electricity produced at power plants is distributed to consumers through several stages of substations. At this time, an ultra-high voltage transformer is needed in the initial transmission stage to transmit a voltage suitable for each consumer. A high voltage, non-uniform electric field is formed at the end of the winding of the ultra-high voltage transformer, which carries a risk of dielectric breakdown. The winding of the ultra-high voltage transformer is an electrode, which is the key to converting the magnitude of the voltage. A non-uniform electric field is formed along the shape of the winding end, resulting in high electrical stress. The static ring installed at the upper and lower ends of the winding is used to disperse the stress at the winding end. Several variables should be considered when designing a static ring. Among them, this study examined how the curvature of the static ring, the thickness of the insulating paper, the number of barriers, and barrier thickness affect the electrical stress of the static ring using the Finite Element Method. Suggestions to be considered when designing the static ring are proposed through the FEM results.

• Journal of Institute of Convergence Technology
• /
• v.6 no.2
• /
• pp.35-40
• /
• 2016

Ignitor tip is a component of burner to start the burning process in power plant. This is used to ignite the coal to a constant operating state by fuel mixed with air and kerosene. This component is composed of three components so that air and kerosene are mixed in the proper ratio and injected uniformly. Because the parts with the designed shape are manufactured in the machining process, they have to be made of three parts. These parts are designed to have various functions in each part. The mixing part mixes the supplied air and kerosene through the six holes and sends it to the injecting part at the proper ratio. The inject part injects mixed fuel, which is led to have a constant rotational direction in the connecting part, to the burner. And the connecting plate that the mixed fuel could rotate and spray is assembled so that the flame can be injected uniformly. But this part causes problems that are worn by vibration and rotation because it is mechanically assembled between the mixing part and the inject part. In this study, 3D printing method is used to integrate a connecting plate and an inject part to solve this wear problem. The 3D printing method could make this integrated part because the process is carried out layer by layer using a metal powder material. The part manufactured by 3D printing process should perform the post process such as support removal and surface treatment. However, while performing the 3D printing process, the material properties of the metal powders are changed by the laser sintering process. This change in material properties makes the post process difficult. In consideration of these variables, we have studied the optimization of manufacturing process using 3D printing method.

• Journal of Distribution Science
• /
• v.11 no.5
• /
• pp.63-76
• /
• 2013

Purpose - For the past several decades, behavioral economics or behavioral decision theory has undergone rapid development. This study provides a critical review of the development of behavioral economics with a focus on what are deemed to be core theories in the field. Starting from the utility function proposed by Daniel Bernoulli in the 18th century, the development history of utility functions until the emergence of the prospect theory is thoroughly reviewed. Some of the experimental results violating the traditionally assumed utility function and supporting the prospect theory value function are summarized. The most representative principles of rational choice are transitivity, independence from irrelevant alternatives (IIA), and regularity. The development of behavioral economics has been triggered by finding counter-examples to these principles. Some of the choice behaviors discussed in this study as counter-examples to the traditional theories of rational choice are the St. Petersburg paradox; the Allais paradox; gambling behavior; and the various context effects including the similarity effect, attraction effect, and the compromise effect. The Elimination-by-Aspects (EBA) model, which was proposed as an explanation for the similarity effect, is discussed in detail as well. Based on the literature review and further analysis, this study summarizes the relationship between the context effects, prospect theory, and EBA model. Research design, data, and methodology - This study provides an extensive literature review on several important theories in the field of behavioral decision theory and adds some critical comments to the theories and the relationships among them. This study first reviews the development of utility functions. Daniel Bernoulli introduced the concept of utility function to solve the St. Petersburg paradox. In the mid-20th century, Herbert Simon proposed the "satisficing" heuristic and presented a value function with a shape different from traditional utility functions. This study highlights the strengths and weaknesses of several utility functions proposed until the emergence of the prospect theory value function. Results - This study posits that prospect theory and EBA model are the two most important theories in the field of behavioral decision theory. They can explain various choice behaviors that traditional utility maximization analysis has been unable to. The application of these models to various fields is further increasing nowadays. This study explains how prospect theory and the EBA model can be used to explain the context effects. Conclusions - The traditional economic theory relies on a single variable called "utility" in explaining consumer choice. However, this study argues that, in investigating consumer choice, several other variables should also be considered. These are the similarity among alternatives, an alternative's prototypicality within the category, the dominance relationship between alternatives, and the reference point in evaluating alternatives. Due to the development of behavioral economics, we are now closer to a more complete understanding of consumer choice behavior than in the past when we had only a single tool called utility.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1081-1089
• /
• 2005

In order to examine the application feasibility of Orimulsion fuel in a commercial boiler using heavy fuel oil, a numerical and experimental research efforts have been made especially to figure out the fundamental combustion characteristics of this fuel in a small-scale boiler. One of the notable combustion features of Orimulsion fuel is the delayed appearance of flame location with the flame shape of rather broad distribution, which is found experimentally and confirmed by numerical calculation. This kind of flame characteristics is considered due to the high moisture content included inherently in the process of Orimulsion manufacture together with micro-explosion by the existence of fine water droplets. In order to investigate the effect on the combustion characteristics of Orimulsion, a series of parametric investigation have been made in terms of important design and operational variables such as injected amount of fuel, types of atomization fluid, and phonemenological radiation model employed in the calculation, etc. The delayed feature of peak flame can be alleviated by the adjustment of the flow rate of injected fuel and the generating features of CO, $SO_2$ and NO gases are also evaluated in the boiler. When the steam injection as atomizing fluid is used, the combustion process is stabilized with the reduced region of high flame temperature. In general, the calculation results are physically acceptable and consistent but some refinements of phenomenological models are necessary for the better resolution of pollutant formation. From the results of this small-scale Orimulsion boiler, it is believed that a number of useful information are obtained with the working computer program for the near future application of Orimulsion fuel to a conventional boiler.