• IEMEK Journal of Embedded Systems and Applications
• /
• v.9 no.3
• /
• pp.145-150
• /
• 2014

This paper presents an effective vision based method for LED traffic light detection at the daytime. First, the proposed method calculates horizontal coordinates to set region of interest (ROI) on input sequence images. Second, the proposed uses color segmentation method to extract region of green and red traffic light. Next, to classify traffic light and another noise, shape filter and haar-like feature value are used. Finally, temporal delay filter with weight is applied to remove blinking effect of LED traffic light, and state and weight of traffic light detection are used to classify types of traffic light. For simulations, the proposed method is implemented through Intel Core CPU with 2.80 GHz and 4 GB RAM, and tested on the urban and rural road video. Average detection rate of traffic light is 94.50 % and average recognition rate of traffic type is 90.24 %. Average computing time of the proposed method is 11 ms.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.3
• /
• pp.38-44
• /
• 2000

In general liquid rocket nozzles are protected from hot combustion gas by regenerative cooling techniques. But due to the complexity of the cooling system, it causes increase of system cost and frequently source of the system malfunction. Recently, instead of regenerative cooing, ablative material are used to protect combustion chamber wall and nozzle. To determine the nozzle material erosion rate and erosion shape, more than 500 hot fire test were performed by using 100 lb thrust experimental liquid rocket. Test variable were propellant feed sequence, injector, position of igniter and liquid oxygen supply temperature.

• Applied Microscopy
• /
• v.44 no.4
• /
• pp.111-116
• /
• 2014

This study investigates the developmental pattern of adhesive discs (ADs) to highlight the ontogeny and structural changes that occur during the growth of Boston ivy. Initiation to postmortem features of ADs were examined through light and scanning electron microscopy. The study also reveals a new finding of the dislocation of peripheral tissues of adaxial origin. Four phases of attachment are suggested with regards to its climbing behavior: 1) pre-attachment, 2) upon attachment, 3) after attachment, and 4) final attachment. During initiation, several ADs originate from tendril primordia without epidermal differentiation. However, different growth rates in the epidermis results in completely different ADs. ADs were discerned by size, shape, and color during expansion, but cells in the adaxial surface remained alive longer than the other side. Upon contact, the ADs demonstrate simultaneous growth and deterioration, but once attachment is established the latter process subdues to final stages. Epidermal transformation, adhesive secretion, cellular disruption, and mechanical stress were essential for the self-clinging nature of Boston ivy. The post-attachment sequence is also believed to be critical in achieving maximum mechanical strength to provide extensive support. The developmental process of ADs is prompted by tactile stimulation but in a highly organized and systematic manner.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.6
• /
• pp.98-104
• /
• 2010

Rapid Prototypes with internally colored objects are convenient by visualizing. A rapid prototyping method has been developed to fabricate mono-colored or multi-colored objects. In this work, a new process was proposed that can fabricate internally visible colored 3D objects in stereolithography parts. The process consists of projection stereolithography process using transparent photocurable resin for outer shapes and molten ink deposition process using molten solid ink for internal shapes. In molten ink deposition process, molten solid ink could be deposited uniformly in a designed pattern. To make molten solid ink uniform over a designed region, parametric study through a patterning solid ink was performed. By laminating resin and solid ink in sequence, the process can make colored 3D objects in StereoLithography(SL) parts. The practicality and effectiveness of the proposed process were verified through fabrication of colored basic 3D objects in SL parts.

• Structural Engineering and Mechanics
• /
• v.17 no.6
• /
• pp.751-766
• /
• 2004

This paper extends the use of the hierarchic degenerated shell element to geometric non-linear analysis of composite laminated skew plates by the p-version of the finite element method. For the geometric non-linear analysis, the total Lagrangian formulation is adopted with moderately large displacement and small strain being accounted for in the sense of von Karman hypothesis. The present model is based on equivalent-single layer laminate theory with the first order shear deformation including a shear correction factor of 5/6. The integrals of Legendre polynomials are used for shape functions with p-level varying from 1 to 10. A wide variety of linear and non-linear results obtained by the p-version finite element model are presented for the laminated skew plates as well as laminated square plates. A numerical analysis is made to illustrate the influence of the geometric non-linear effect on the transverse deflections and the stresses with respect to width/depth ratio (a/h), skew angle (${\beta}$), and stacking sequence of layers. The present results are in good agreement with the results in literatures.

• Parasites, Hosts and Diseases
• /
• v.59 no.3
• /
• pp.311-317
• /
• 2021

The present study reports a rare case of Taenia saginata infection, which was initially diagnosed as acute cholecystitis in a Tibetan patient at the Qinghai-Tibetan Plateau pastoral area, China. A 45-year-old female was initially diagnosed with acute cholecystitis at a hospital in China. She had a slight fever, weight loss and constipation and complained of pain in the upper abdomen and left back areas. Increase of monocyte, eosinophil and basophil levels were shown. Taenia sp. eggs were detected in a fecal examination. An adult tapeworm approximately 146 cm in length, whitish-yellow color, was collected from the patient after treatment with traditional Chinese medicine. The adult tapeworm had a scolex and proglottids with genital pores. The scolex was rectangular shape with 4 suckers and rostellum without hooklet. The cox1 gene sequence shared 99.5-99.8% homology with that of T. saginata from other regions in China. The patient was diagnosed finally infected with T. saginata by morphological and molecular charateristics.

• Journal of Daesoon Thought and the Religions of East Asia
• /
• v.1 no.1
• /
• pp.17-37
• /
• 2021

Scholars of new religious movements have emphasized the role of "second founders," such as Judge J.F. Rutherford for the Jehovah's Witnesses, Brigham Young for the Mormons, or Deguchi Onisaburo for Oomoto. They systematize and structure movements often created by the "first founders" with a minimal organization only. The paper argues that the model for the sequence first founder/second founder described by these scholars is the relationship between Jesus and Paul of Tarsus at the origins of Christianity. It proposes a comparison between Jesus of Nazareth and Kang Jeungsan, who established the tradition leading to present-day Daesoon Jinrihoe. It then summarizes the biography of Jo Jeongsan, recognized by Daesoon Jinrihoe as its "second founder" within the same tradition, and discusses the analogies between his connection to the "first founder," Kang Jeungsan, and the connection Paul of Tarsus established with Jesus Christ. The paper considers recent scholarship about Paul, often described as the "New Perspective on Pauline Scholarship." Paul never personally met Jesus Christ, except after the latter's death through a spiritual revelation, just as Jo Jeongsan never met Kang Jeungsan, except after his death, when he manifested himself to him in spirit. Nonetheless, Paul was able to decisively shape the largest branch among the followers of Jesus Christ, just as Jo Jeongsan originated the lineage leading to Daesoon Jinrihoe, currently the largest religious order among those recognizing Kang Jeungsan as the incarnated Supreme God.

• The Korean Journal of Mycology
• /
• v.50 no.3
• /
• pp.195-204
• /
• 2022

A fungal strain, designated KNUF-20-NI009, was isolated from soil collected from Gunsan-si, Jeollabuk-do, Korea. The isolate showed cultural features typical of the genus Xenoroussoella. Colonies cultivated on malt extract agar were olivaceous-brown to pale olivaceous-white at the margins, with undersides of dark olivaceous to olivaceous-brown and a white margin. The conidia, with a size range of 2.7-5.1×1.6-3.3 ㎛ ($\bar{x}=3.6\times2.6{\mu}m$, n=50), were globoid to ellipsoid in shape, hyaline when immature, becoming light brown to golden-brown when mature, and characterized by 1 or 2 guttules. Multi-locus sequence analysis based on a combined dataset of internal transcribed spacer regions (ITS), large subunit rDNA (LSU), small subunit rDNA (SSU), translation elongation factor 1-alpha (TEF1α), and RNA polymerase II largest subunit (RPB2) sequences revealed KNUF-20-NI009 to be a strain of Xenoroussoella triseptata. This is the first report of this species in Korea.

• Composites Research
• /
• v.20 no.5
• /
• pp.7-12
• /
• 2007

This paper aims to enhance the efficiency of bone fracture healing with bone plate made of fiber reinforced composite materials. The composite bone plate was designed as the same dimension and shape as the existing stainless steel bone plate. To find out the appropriate stacking sequence of the composite bone plate the variations of strain distributions were calculated using FE analysis when the bone plates were applied to the fracture site. From the analysis result it was found that the composite bone plate whose Young's modulus is lower than that of metal bone plate gave more uniform strain distribution and provided appropriate condition for callus formation and its development.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.8
• /
• pp.57-64
• /
• 1997

The process design of backward and forward extrusion of axisymmetric part has been studied in this paper. The important factors of cold forging process with complex geometry are the design of initial billet shape, the possibility of forming by one-stage operation and the determination of preform shapes, etc. Based on the systematic procedure of process sequence design, the forming operation of cold forged part is analyzed by the commercial finite element program, DEFORM. The design criteria are forming load, geo- metrical filling without defect and a sound distribution of effective strain in final product. It is noted that one step of preform operation is required to obtain the final product. Numerical result is compared with experi- mental one. It is found that the analyzed result is in good agreement with actual forming result.