• Archives of design research
• /
• v.13
• /
• pp.153-162
• /
• 1996

The residence space has been in the trend of being expanded with the J'l'cent economic growth Therefore PAC may be said to have [wen from business use to home US(: the progressed living standard as the goods ior Uw "ummel' S('dSOn rest'ntly though sold in Uw fast for mainly buslTw"s use. PAC has been in the demand day ;lner day and in the tn'nd on the bc,ing the necessJty of the n'sent wf',lther warming phenomenon This study is the case study nf the products development and design process of PAC which has bpcn llrivcn and developed by Gold Star Co. ,Ltd. Which .is the firm for home electric appliances representing Korea. This studies for the development and the design of the products by the firm thus emphasizing the visulizing it based on this study. For example as they being the goods for the summer season I have tried to know the physical quakity and the characters of koreans by the weather conditions and estimated the demand by setting up the target customers of the PAC as the customers' environment. And I analyzed the acts in the living room in the apartments as the living envinorment which has the direct relation with PAC and also became a help to the moulding work of PAC by analyzing the complete interior image in the living room. In the practical moulding work the Design concept was classified into the envinorment of customer, living and products to drive as the below. Firstly - New shape (Round slim) has been realized which leads the minimizing the moulding space and visul sense of opening as its being spacious. The 2nd - the high class sense of the products which are harmonious with the atmosphere of the living room by making it interiorized has been visible. The 3rd - The shape stimulating the sensitivity of the users and surface treatment are emphasized by making it be touched. The 4th - During inviting use of technology image which appears in the electronics products are attemptedby making it be high quality.king it be high quality.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.5
• /
• pp.220-229
• /
• 2004

We have examined a technique of one-dimensional (1D) fluid modeling for radio-frequency Ar capacitively coupled plasmas (CCP) between unequal-sized powered and grounded electrodes. In order to simulate a practical CCP reactor configuration with a grounded side wall by the 1D model, it has been assumed that the discharge space has a conic frustum shape; the grounded electrode is larger than the powered one and the discharge space expands with the distance from the powered electrode. In this paper, we focus on how much a 1D model can approximate a 2D model and evaluate their comparisons. The plasma density calculated by the 1D model has been compared with that by a two-dimensional (2D) fluid model, and a qualitative agreement between them has been obtained. In addition, 1D and 2D calculation results for another reactor configuration with equal-sized electrodes have also been presented together for comparison. In the discussion, four CCP models, which are 1D and 2D models with symmetric and asymmetric geometries, are compared with each other and the DC self-bias voltage has been focused on as a characteristic property that reflects the unequal electrode surface areas. Reactor configuration and experimental parameters, which the self-bias depends on, have been investigated to develop the ID modeling for reactor geometry with unequal-sized electrodes.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.3
• /
• pp.429-433
• /
• 2000

Giardia lamblia, a human pathogen causing outbreaks of diarrhea, recently became a focus of great concerns in the fields of both medical and environmental microbioloty. To develop the experimental tools to study giardiasis, encystation, one of the major processes in its life cycle, was reconstituted by inducing an axenic culture of a flagellated form of G. lamblia into a cyst from under high concentration of bile and alkaline pH condition. The successful induction was confirmed by Northern analysis of resulting increased expression of the CWPl gene encoding the cyst wall protein 1. An examination of the encystation process with SEM (scanning electron microscopy) and TEM (transmission electron microscopy) revealed that the trophozoite, a flagellate with a bilateral symmetry, was transformed to a cyst form with an oval-shape and defined filamentous wall. The encystation was found to cause a disappearance of the flagella and an invagination of the adhesive disc. An extensive formation of rER (rough endoplasmic reticulum) was observed after 24h of induction, indication an active synthesis and export of proteins during this process. The vital staining of the invitro-induced systs showed that most cysts maintained their viability.

• Journal of computational fluids engineering
• /
• v.16 no.2
• /
• pp.66-74
• /
• 2011

The SCR catalyst in coal-fired power plant is eroded by the collision of fly ash on the catalyst surface. However the erosion of SCR catalyst by the collision of fly ash has not been fully studied, especially in terms of fluid dynamics. Hence, in the present study, we focus on the gas and solid flows inside the SCR catalyst duct and their consequent effect on the erosion characteristics. For this purpose, computational fluid dynamics is applied to investigate the two-phase flows and to evaluate the erosion rate for different flow and particle injection conditions. Also, the erosion rate and pressure drop of commonly used square shape are compared with equilateral triangle and hexagon shapes. The pressure drop of SCR catalyst is increased when SCR catalyst surface area per unit volume increases. The erosion rate of SCR catalyst is enhanced when the particle velocity, mass flow rate of particle, particle diameter and cell density of SCR catalyst are increased. From the results, the pressure drop and erosion rate at the catalyst surface can be minimized by reducing cell density of SCR catalyst to decrease particle velocity and number of particle impacts.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.95-95
• /
• 2010

In recent, there are tremendous requirements to improve the fuel economy of vehicle. For satisfaction of requirements, Hybrid Electric Vehicle or other technologies are suggested and implemented. However, it should be noted that almost 35% energy loss is occurred in the shape of exhaust gas as ever. For increase the efficiency of vehicle, it is certain that the exhaust gas energy should be recover, and generate energy. In previous studies, the technologies such as turbo-compound, thermoelectric and rankine cycle are suggested to recover the exhaust heat energy in vehicle. But, they focus on the conventional vehicle or parallel Hybrid Electric Vehicle. Series Hybrid Electric Vehicle has advantage that the engine and drive shaft are de-coupled. It means that the engine can be operated in high efficiency area regardless with vehicle states. Therefore, if rankine cycle is applied to series hybrid electric vehicle, operating condition of that becomes almost steady. So, in this study, theoretical analysis on the efficiency of rankine cycle applied to series hybrid electric city bus is carried and the energy recovered from exhaust gas during vehicle drive cycle is calculated.

• Journal of radiological science and technology
• /
• v.16 no.1
• /
• pp.101-106
• /
• 1993

In order to assure safety of both patient and operator, and to provide uniform quality radiographs, it is necessary to perform periodic calibration of diagnostic X-ray equipment. A basic parameter of diagnostic equipment's and its image sharpness is the size(and shape the energy distribution) of the focal spot as viewed along the central X-ray beam. This size determines the resolution possible with the equipment and also determines the heat characteristics of an anode. A fine focus tube gives high resolution but causes high local heating of target. In past, the pin-hole and star pattern image measurement for evaluation of resolution have been widely used, but it produced blurring and inaccuracy of image. So newly inverted Ug-meter has advantage in more convenient measurement method and less out-put bias than other image measurement. The authors intended to compare measured focal size between Ug-meter and focal spot test tool, changed state from setting to now of units.

• Journal of the Korea Furniture Society
• /
• v.25 no.4
• /
• pp.338-344
• /
• 2014

Modern furniture design is advancing by putting value on individual sensitivity. Accordingly, this study will focus on optical art, which can give various changes in people's sensitivity. Optical art was actively applied in various fields of image, photograph, fashion, textile, accessory and interior from the 1950s till the 1960s. Optical art realized by Victor Vasarely (1908~) opened a new trend in art by accurately realizing concise and precise expressions. This study analyzed the impact of pattern expression on sensitivity in optical art and suggested a method, which can spatiotemporally maximize the emotional change by combining optical art with the form of furniture. Modern furniture design is changing toward the direction of fitting to the propensity and emotional taste of an individual. Accordingly, this study analyzed the emotional expression felt in the furniture modeling works featured by concise, straight and standardized rectangular shape. Based on the result of analysis, this study would like to suggest a method to utilize optical pattern as a means for emotional design, with which people are able to perform various emotional expressions while keeping the function and form of furniture.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1295-1298
• /
• 2004

Selective Laser Sintering(SLS) method is one of Rapid Prototyping(RP) technologies. It is used to fabricate desirable part to sinter powder and stack the fabricated layer. To develop this SLS machine, it needs effective scanning path and the development of scanning device. This paper shows how to make fast scanning path with respect to scan spacing, laser beam size and scanning direction from 2-dimensional sliced file generated in commercial CAD/CAM software. Also, we develop the scanning device and its control algorithm to precisely follow the generated scanning path. Scanning path affects precision and total machining time of the final fabricated part. Sintering occurs using infrared laser which has high thermal energy. As a result, shrinkage and curling of the fabricated part occurs according to thermal distribution. Therefore, fast scanning path generation is needed to eliminate the factors of quality deterioration. It highly affects machining efficiency and prevents shrinkage and curling by relatively lessening the thermal distribution of the surface of sintering layer. To generate this fast scanning path, adaptive path generation is needed with respect to the shape of each layer, and not simply x, y scanning, but the scanning of arbitrary direction must be enabled. This paper addresses path generation method to focus on fast scanning, and development of scanning system and control algorithm to precisely follow generated path.

• Korean Journal of Human Ecology
• /
• v.15 no.6
• /
• pp.1091-1097
• /
• 2006

The purpose of this study was to investigate the preference for female teacher's appearance of the high school boys and girls. A survey was conducted on 400 high school sophomores, juniors and seniors in Chungcheong province, who included both boys and girls. And the answer sheets from 396 students were selected for analysis. For data handling, SPSS 12.0 program was employed to make a frequency analysis of every item, and descriptive statistics was utilized for every item as well. In addition, t-test and crosstabs were implemented to look for any possible gaps between the boys and girls. The results were as follows: Boys had a much more interest in the appearance of female teacher's face than girls. High school Students preferred to nature style in hair and make-up. Boys relatively more liked the teachers who were young, elegant and had feminine attraction than girls. Boys preferred to feminine and traditional than girls. But there were significant differences in the preference of hair shape and make-up color between boys and girls.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.633-640
• /
• 2005

Most existing methods for the footing settlement estimation are for either isolated or strip footings. No sufficient details are available for settlement calculation of footings with different shapes and multiple footing conditions, which are commonly adopted in actual construction projects. In this paper, estimation of footing settlements for various footing conditions of different shapes and multiple conditions is investigated based on Schmertmann's method with focus on values of the strain influence factor $I_z$. In order to examine the effect of multiple footing conditions, field plate load tests are performed in sands using single and double plates. 3D non-linear finite element analyses are also performed for various footing conditions with different footing shape and distance ratios. Results obtained in this study indicate that there are two significant components in the strain influence diagram that need to be taken into account for settlement estimation of rectangular and multiple footings: depth of $I_{zp}$ and depth of strain influence zone. Based on results from experimental and 3D non-linear finite element analyses, improved strain influence diagrams available for various footing conditions are proposed.