• Journal of the Korea Concrete Institute
• /
• v.17 no.2 s.86
• /
• pp.221-227
• /
• 2005

The presence of voids behind tunnel linings is very likely to result in settlement or structural collapse. One proposed method of detecting such voids by non-destructive method is radar. More than effectively judging the existence of voids behind tunnel linings, this study aims to develop the analysis algorithm of radar capable of estimation of the shape of specific voids. To acquire directional information and estimate the shape of three-dimensional voids, the radar of three-dipole antenna type is used. As a foundation to this ongoing research, an investigation of microwave polarization methods using three-dipole antenna carried out with various void orientations and void geometries. As a result, it is clarified that the response of four microwave polarization modes depends on void geometry and thus there is a possibility of identifying the geometry and orientation (the shape) of specific voids using radar of three-dipole antenna type.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.66 no.5
• /
• pp.1-13
• /
• 2024

In this study, we applied an on-site diagnostic method for estimating the structural safety of a plastic greenhouse. A three-dimensional light detection and ranging (3D LiDAR) sensor was used to scan the greenhouse to extract point cloud data (PCD). Differential thresholds of the color index were applied to the partitions of raw PCD to separate steel frames from plastic films. Additionally, the K-means algorithm was used to convert the steel frame PCD into the nodes of unit members. These nodes were subsequently transformed into structural shape data. To verify greenhouse shape reproducibility, the member lengths of the scan and blueprint models were compared with the measurements along the X-, Y-, and Z-axes. The error of the scan model was accurate at 2%-3%, whereas the error of the blueprint model was 5.4%. At a maximum snow depth of 0.5 m, the scan model revealed asymmetric horizontal deflection and extreme bending stress, which indicated that even minor shape irregularities could result in critical failures in extreme weather. The safety factor for bending stress in the scan model was 18.7% lower than that in the blueprint model. This phenomenon indicated that precise shape estimation is crucial for safety diagnostic. Future studies should focus on the development of an automated process based on supervised learning to ensure the widespread adoption of greenhouse safety diagnostics.

• Journal of the Korean Society of Costume
• /
• v.47
• /
• pp.73-88
• /
• 1999

To find the reasonable gathering amount by a length of gathered skirt and a fabric the methods of this study were divided on three types-five kinds of the gathering amounts three kinds of fabrics and three kinds of skirt length-so forty five kinds of the samples were made. As the visual evaluation and the shape of hemlines evaluation of the gathered skirt were practiced by these factors this study found the aesthetical gathering amount and analyzed the shape of hemlines. The following are the results of this research. 1. In the same fabric and skirt length to estimate a hemlines shape of a gathered skirt the increased amount of the node number of cotton fabric was widest and wool fabric was most stable And when the gathering amounts of each fabric were higher than 1.5 times the node indexes were no difference. According as a skirt length was longer the node indexes assumed a similar aspects but according as the skirt length was shorten an the gathering amount was smaller the node shapes were level and broad. And according to being increased a gathering amount the width of right and left of gathered skirt was generally wider. 2. In the same gathering amount and skirt length in seeing the estimation of a hemlines shape of a gathered skirt when the skirt length was 40cm in cotton polyester wool fabrics the node indexes were similar at up to 1.5 times of gathering amount and especially it became very bigger at 0.5 times and according as the gathering amount was increased node index became gradually smaller. The width of right and left of the skirt hemlines of wool fabric was more smaller than polyester and cotton fabrics so it is happen to hang down. 3. In the same gathering amount and fabric in seeing the estimation of a hemlines shape as a variation of a skirt length when the gathering amount of cotton and polyester was from up to 1.5 times and wood fabric was from up to 1.0 times according as skirt length was longer node index in the same gathering amount was decreased. And in case as it was 0.5 times the node indexes of the 40cm and 60cm skirt length were bigger than other factors. In the same gathering amount the width of right and left of the skirt hemlines was smaller at 60cm skirt length and polyester fabric was smaller at 80cm skirt length.

• Nutrition Research and Practice
• /
• v.14 no.6
• /
• pp.667-678
• /
• 2020

BACKGROUND/OBJECTIVES: This study aimed to improve portion size estimation aids (PSEAs) used in the nutrition survey of the Korea National Health and Nutrition Examination Survey (KNHANES) and validate the accuracy and precision of the newly developed aids. SUBJECTS/METHODS: We conducted intensive interviews with survey experts in KNHANES and consulted with experts to collect opinions about improvement of PSEAs. Based on the results of the interviews, 5 types of PSEAs (rice bowl, earthen pots, mounds, measuring spoons, and thickness sticks) were newly developed using 3-dimensional (3D) modeling or modification of color or shape. Validation tests were conducted with 96 adults 20 years old or older. For the rice bowl and earthen pots, the participants were asked to select the more similar PSEA in size after being shown the real dishes. For the mounds, measuring spoons, and thickness sticks, the participants were presented with actual plates of food and asked to estimate the given portion sizes using the given PSEAs. RESULTS: The improved 2-dimensional (2D) picture aid for the rice bowl reflecting the size distortion by angle of view using 3D modeling was perceived more closely to the actual size than the current 2D picture (P < 0.001). The change of the color of 2D pictures and 3D models, the change of shape of the measuring spoons, and the 3-dimensionalization of the 2D mounds had no significant improvement in the subjects' perception. CONCLUSIONS: The currently used 2D PSEAs need to be fully redesigned using 3D modeling to improve subjects' perception. However, change of color or shape will not be necessary. For amorphous foods, it is suggested that more evaluation be performed before reaching a final conclusion in the use of PSEAs, or alternative ways to improve accuracy of estimation need to be explored.

• Journal of Biomedical Engineering Research
• /
• v.16 no.4
• /
• pp.499-506
• /
• 1995

A new numerical method estimated three dimensional shape of the internal surface of the stomach by analyzing the shading data of endoscopic image. First analyzed was the inherent instrumentational characteristics of the endoscope system, followed by the analysis of the stomach surface properties, both of which affected the imaging properties. We employed these prior informations to implement the iterative algorithm of shading analysis based on Hom's variational approach. The present algorithm was validated by performing simulation on a $256{\times}320$ image data chosen from original $512{\times}512$ image of the stomach surface model. The best 3-dimensional estimation of the surface was achieved with the Lagrangian multiplier, of 0.3, when the algorithm best converged showing minimal estimation error.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.975-981
• /
• 2012

The SNR estimation performance of hierarchical 16QAM system, which is adopted to simultaneous transmission or efficient image transmission system, is analyzed. Hierarchical 16QAM is modulation system which has different constellation shape from conventional QAM and can provide users with high quality and low quality of data services simultaneously by controlling hierarchical modulation parameter. Assuming AWGN channel, SNR estimation performance characteristics are investigated considering hierarchical modulation parameter and type of constellation points. From simulation results, it is found that constellation point showing superior SNR estimation performance relative to other points is exist. Also, it is known that according to hierarchical modulation parameter, SNR estimation range with more accurate estimation performance is divided.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.768-772
• /
• 2009

This paper proposes a method for measurement three-dimensional trajectories of bubbles generated around a swimmer's arms from stereo high-speed camera videos. This method is based on two techniques: two-dimensional trajectory estimation in single-camera images and trajectory pair matching in stereo-camera images. The two-dimensional trajectory is estimated by block matching using similarity of bubble shape and probability of bubble displacement. The trajectory matching is achieved by a consistensy test using epipolar constraint in multiple frames. The experimental results in two-dimensional trajectory estimation showed the estimation accuracy of 47% solely by the general optical flow estimation, whereas 71% taking the bubble displacement into consideration. This concludes bubble displacement is an efficient aspect in this estimation. In three-dimensional trajectory estimation, bubbles were visually captured moving along the flow generated by an arm; which means an efficient material for swimmers to swim faster.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1411-1414
• /
• 1997

It is essential to obtain a distane informaion in order to completely execute assembly tasks such as a grasping and an insertion. In this paper, we propose a method estimating a measurement distance from a sensor to an object through using the omni-directional image sensing system for assembly(OISSA) and show its features and feasibility by a computer simulation. The method, utilizing a forwarded motion stereo technique, is simple to search the corresponding points and possible to immediatiely obtain a three-dimensional 2.pi.-shape information.

• Journal of Korean Institute of Industrial Engineers
• /
• v.15 no.2
• /
• pp.103-108
• /
• 1989

PERT formulae for the mean and variance of activity time are near exact only over a short interval of the concentration parameter which is defined as the sum of the two shape parameters of the beta distribution. Aiming a better estimation of the mean and variance of activity time, we propose a method of subjectively estimating this concentration parameter via estimating the probability of completing the activity within a specified time interval.

• Journal of Welding and Joining
• /
• v.17 no.3
• /
• pp.26-35
• /
• 1999

On the laser weld production line, a slight alteration of the welding condition changes the bead size and the strength of the weldment. The measurement system is produced by using three photo-diodes for detection of the plasma and spatter signal in $CO_2$ laser welding. The relationship between the sensor signals of plasma or spatter and the bead shape, and the mechanism of the plasma and spatter were analyzed for the bead size estimation. The penetration depth and the bead width were estimated using the multiple regression analysis.