• 한국강구조학회 논문집
• /
• 제13권1호
• /
• pp.9-18
• /
• 2001

대스팬 철골구조물의 지붕구조로서 강관트러스가 많이 사용되고 있다. 강관트러스는 타 단면(H, L형강 등)에 비하여 구조역학적인 측면에서 유리하다고 할 수 있다. 그러나 지관의 압축력에 의하여 격점부에는 국부좌굴이 발생하고 이로 인하여 구조체 전체의 내력이 격점부의 지배를 받게 된다. 또한 강관 격점부에서의 내력 및 변형 성상은 거동이 복잡하여 정확한 거동을 예측하기 어려울뿐만 아니라 해석적으로 정밀해를 구하기 어렵다. 이 연구에서는 T형 격점부를 대상으로 지관과 주관의 직경비(d/D) 주관경과 두께비(D/T)에 관한 변수를 설정하여 일련의 실험을 진행하고 기초하여 단순한 링해석법을 이용하여 항복하중에 관한 실용해를 제안하였다. 또한 부가적으로 각국에서 제안된 항복하중에 관한 기존의 연구결과와도 비교, 검토하였다.

• Structural Engineering and Mechanics
• /
• 제47권6호
• /
• pp.881-898
• /
• 2013

This paper describes analytical investigation into a new dual function system including a couple of shear links which are connected in series using chevron bracing capable to correlate its performance with magnitude of earthquakes. In this proposed system, called Chevron Knee-Vertical Link Beam braced system (CK-VLB), the inherent hysteretic damping of vertical link beam placed above chevron bracing is exclusively utilized to dissipate the energy of moderate earthquakes through web plastic shear distortion while the rest of the structural elements are in elastic range. Under strong earthquakes, plastic deformation of VLB will be halted via restraining it by Stopper Device (SD) and further imposed displacement subsequently causes yielding of the knee elements located at the bottom of chevron bracing to significantly increase the energy dissipation capacity level. In this paper first by studying the knee yielding mode, a suitable shape and angle for diagonal-knee bracing is proposed. Then finite elements models are developed. Monotonic and cyclic analyses have been conducted to compare dissipation capacities on three individual models of passive systems (CK-VLB, knee braced system and SPS system) by General-purpose finite element program ABAQUS in which a bilinear kinematic hardening model is incorporated to trace the material nonlinearity. Also quasi-static cyclic loading based on the guidelines presented in ATC-24 has been imposed to different models of CK-VLB with changing of vertical link beam section in order to find prime effectiveness on structural frames. Results show that CK-VLB system exhibits stable behavior and is capable of dissipating a significant amount of energy in two separate levels of lateral forces due to different probable earthquakes.

• Composites Research
• /
• 제23권3호
• /
• pp.37-42
• /
• 2010

섬유 방향 강성과 강도는 복합재 압력 용기의 성능과 밀접한 관계를 갖기 때문에, 압력 용기 구조 설계시에 다른 물성들보다 중요 설계 인자가 된다. 즉 복합재 압력 용기의 내압 변형 및 파열 압력은 섬유 물성에 의해 큰 영향을 받는다. 그러므로 정확한 섬유 방향 물성을 측정할 수 있는 기법을 확립하는 것이 복합재 압력 용기 설계 전에 우선되어야 한다. 그러나 복합재 압력용기의 섬유 방향 물성은 제작 공정 변수(와인딩 장비, 작업자, 작업환경 등)와 크기 효과에 의해 큰 영향을 받으므로 기존의 시편 시험 방법으로는 정확한 섬유 방향 물성 측정이 어렵다. 섬유 물성을 측정하는 가장 이상적인 시험 방법은 실물 압력용기 파괴시험이지만 많은 비용이 소요되어, 제품으로부터 다량의 링 시편을 채취, 내압 시험을 할 수 있는 Hoop ring 시험 방법이 제시되었다. Hoop ring 시험과 실물 압력용기의 수압 파괴 시험으로부터 구한 섬유 방향 물성들은 근접된 좋은 일치를 나타내었다.

• Steel and Composite Structures
• /
• 제26권6호
• /
• pp.771-791
• /
• 2018

This paper deals with the low velocity impact response and dynamic stresses of composite sandwich truncated conical shells (STCS) with compressible or incompressible core. Impacts are assumed to occur normally over the top face-sheet and the interaction between the impactor and the structure is simulated using a new equivalent three-degree-of-freedom (TDOF) spring-mass-damper (SMD) model. The displacement fields of core and face sheets are considered by higher order and first order shear deformation theory (FSDT), respectively. Considering continuity boundary conditions between the layers, the motion equations are derived based on Hamilton's principal incorporating the curvature, in-plane stress of the core and the structural damping effects based on Kelvin-Voigt model. In order to obtain the contact force, the displacement histories and the dynamic stresses, the differential quadrature method (DQM) is used. The effects of different parameters such as number of the layers of the face sheets, boundary conditions, semi vertex angle of the cone, impact velocity of impactor, trapezoidal shape and in-plane stresses of the core are examined on the low velocity impact response of STCS. Comparison of the present results with those reported by other researchers, confirms the accuracy of the present method. Numerical results show that increasing the impact velocity of the impactor yields to increases in the maximum contact force and deflection, while the contact duration is decreased. In addition, the normal stresses induced in top layer are higher than bottom layer since the top layer is subjected to impact load. Furthermore, with considering structural damping, the contact force and dynamic deflection decrees.

• 한국수산과학회지
• /
• 제28권3호
• /
• pp.354-363
• /
• 1995

1992년 1월부터 6월까지의 인공위성 적외선 영상자료를 이용하여 속초 근해에 형성된 와동류의 시간적 변화에 대하여 연구하였고 동년 5월에 그 구조를 관측하였다 와동류의 형성에는 두 가지 종류의 과정이 있는 것으로 나타났는데, 첫 번째로 1월의 영상자료에 의하면 난류의 대량 공급으로 인하여 약 200km 크기의 와동류가 형성되었다. 그 이후에 약간의 변형과 냉각과정을 거쳐서 3월에는 난류의 좁은 필라멘트가 북쪽으로 침투하면서 어느 정도 냉각된 기존의 와동류를 포위함으로써 4-5월에는 반지모양의 와동류로 발달하는 두 번째의 형성과정이었다. 와동류의 내부에는 수온 $10.0-10.4^{\circ}C$의 균질 중층수가 최대 170m의 두께로 존재하였다. 속초 근처 동한난류의 축에서의 유속 약 80cm/sec를 제외하면 나머지 부분의 와동류 내부에는 대체로 30-50cm/sec의 유속분포를 보였고 주수온약층 밑으로는 유속이 급격히 감소하였다.

• 한국CDE학회논문집
• /
• 제17권3호
• /
• pp.188-197
• /
• 2012

Recently, aluminum ships are constructed more than ever because of the environmental pollution generated by FRP (Fiber Reinforced Plastic) ships. In particular, FRP ships have been replaced by the Aluminum ships. The forming process of the curved aluminum plate has been performed only by labor works without systematic technique. Therefore, it is difficult to construct the aluminum ship that the design satisfies both required propulsion performance and hull design. Present study introduces a MPSF (Multi Point Stretching Forming) that is a flexible manufacturing technique to form large sheet panels of doubly curvature. The hull pieces are stretch-formed over the MPSD (multi-point stretching die) generated by the punch element matrix. In this study, MPSF is applied to deform the doubly curved surfaces of aluminum ship. The forming system including FEA (finite element analysis) of the processes for stretching the plate were carried out by static implicit analysis is suggested. Residual deformation of the surface is modeled by an elasto-plastic contact phenomena while the forming process is simulated by FEA. Finally, the proposed system is also validated, comparing the deformed shape by MPSF with that of object surfaces.

• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1528-1534
• /
• 2001

In order to improve Leak-Be(ore-Break methodology, more precisely the crack growth evaluation, a round robin analysis was proposed by the CEA Saclay. The aim of this analysis was to evaluate the crack initiation life, penetration life and shape of through wall crack under cyclic bending loads. The proposed round robin analysis is composed of three main topic; fatigue crack initiation, crack propagation and crack penetration. This paper deals with the first topic, crack initiation in a notched pipe under four point bending. Both elastic-plastic finite element analysis and Neuber's rule were used to estimate the crack initiation life and the finite element models were verified by mesh-refinement, stress distribution and global deflection. In elastic-plastic finite element analysis, crack initiation life was determined by strain amplitude at the notch tip and strain-life curve of the material. In the analytical method, Neuber's rule with the consideration of load history and mean stress effect, was used for the life estimation. The effect of notch tip radius, strain range, cyclic hardening rule were examined in this study. When these results were compared with the experimental ones, the global deformation was a good agreement but the crack initiation cycle was higher than the experimental result.

• 박물관보존과학
• /
• 제16권
• /
• pp.14-31
• /
• 2015

고령 지산동 고분군 39호분에서 출토된 장식대도(M310)는 손잡이 끝의 둥근 고리 안에 용의 머리를 장식한 환두대도로 금과 은을 활용하여 금장, 은장, 도금, 투조, 조금의 기술로 제작되었다. 장식대도는 손잡이 금구의 변형과 손상, 도신의 결실, 부식 등이 발생하여 보존처리를 진행하였다. 보존처리는 표면 이물질 및 부식물 제거, 재질의 안정화처리, 강화 처리 순으로 진행하였으며 보존처리와 병행하여 유물의 재질 및 제작기법을 조사하였다. 조사 결과 환두 내 용장식은 아말감도금기법으로 표면이 장식되었고 병두금구는 동제지판에 얇은 금판을 덧씌워 장식되었다. 병판은 은제판을 사격자문으로 투조하여 원통형으로 만들었으며 대도의 칼은 외날의 철제이다. 초구금구 역시 동제지판에 얇은 금판을 덧씌워 장식한 것으로 확인되었다.

• 한국도로학회논문집
• /
• 제20권1호
• /
• pp.9-18
• /
• 2018

PURPOSES : In this research, the initiation and development of corrugation on a gravel road with certain wheel and boundary conditions were evaluated using a coupled discrete-element method (DEM) with multibody dynamics (MBD). METHODS : In this study, 665,534 particles with a 4-mm diameter were generated and compacted to build a circular roadbed track, with a depth and width of 42 mm and 50 mm, respectively. A single wheel with a 100-mm diameter, 40-mm width, and 0.157-kg mass was considered for the track. The single wheel was set to run slowly on the track with a speed of 2.5 rad/s so that the corrugation was gradually initiated and developed without losing contact between the wheel and the roadbed. Then, the shape of the track surface was monitored, and the movement of the particles in the roadbed was tracked at certain wheel-pass numbers to evaluate the overall corrugation initiation and development mechanism. RESULTS : Two types of corrugation, long wave-length and short wave-length, were observed in the circular track. It seems that the long wave-length corrugation was developed by the longitudinal movement of surface particles in the entire track, while the short wave-length corrugation was developed by shear deformation in a local section. Properties such as particle coefficients, track bulk density, and wheel mass, have significant effects on the initiation and development of long-wave corrugation. CONCLUSIONS : It was concluded that the coupled numerical method applied in this research could be effectively used to simulate the corrugation of a gravel road and to understand the mechanism that initiates and develops corrugation. To derive a comprehensive conclusion for the corrugation development under various conditions, the driver's acceleration and deceleration with various particle gradations and wheel-configuration models should be considered in the simulation.

• Tribology and Lubricants
• /
• 제33권1호
• /
• pp.23-30
• /
• 2017

The electric controlled marine diesel engine has fuel pump generating the high pressurized fuel for fuel injection to combustion chamber via a common rail. Fuel pump consists of a cam-roller system. Journal bearing installed between a roller and a cam-roller pin is subjected to fluctuating heavy and instant loads by cam lift. First, Kinematic analysis is carried out to predict bearing loads during one cycle acting on the journal bearing. Second, flexible multi-body dynamic analysis and transient elasto-hydrodynamic(EHD) lubrication analysis for journal bearing considering elastic deformation of cam-roller pin, roller and bearing are conducted using AVL EXCITE/PU software to predict lubrication performance. The clearance ratio and journal groove shape providing lubrication oil are important parameter in bearing design having good performance and can be changed easier than other design parameters such as diameter, width, oil supply pressure and bearing material grade. Generally, journal bearing performance is represented by the minimum oil film thickness(MOFT) and peak oil film pressure(POFP). As well as the traditional design parameters(MOFT, POFP), in this study, temperature rise of lubrication oil is also evaluated through the side leakage flow of supplied oil. By the evaluating MOFT, POFP and temperature rise, the optimum bearing clearance ratio is decided.