• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.2 s.25
• /
• pp.20-25
• /
• 2006

Low frequency towed line array with high array gain and beam resolution is a long range surveillance sensor for anti-submarine warfare. The beam characteristics is however deteriorated due to the distorted line array sensor caused by low towing speed, wind, current, and towing ship maneuvering. An adaptive beamforming method is utilized in this paper to enhance the distorted line array beam performance by estimating and compensating the nonlinear array shape. A polynomial curve fitting in the least square sense is used to estimate the array shape iteratively with the distributed heading sensors data along the array. Real time array shape estimation and nonlinear array beam calculation is applied to a very long towed line array sensor system and the beam performance is evaluated and compared to the linear beamformer for the simulation and sea trial data.

• Fashion & Textile Research Journal
• /
• v.15 no.1
• /
• pp.130-137
• /
• 2013

The percentage of overweight people has increased in older people due to the change of body shape (including pregnancy and giving birth for women). Obesity is accompanied by body shape changes; subsequently, there are more pattern design considerations compared to standard body shapes. This paper classifies the upper body shape of overweight women in Korea, analyzes features by body shape and proposes basic pattern design data that reflects the features of plus-size women body shapes. The data on 540 subjects in the overweight group (from 20 to 69 years old)whose BMI was over 25 was selected. The following features by shape were identified in accordance with the upper body shape classification of overweight women. Body Shape1 had lower body obesity with long stature and arms in proportion to the trunk length and represented 22.2% of the subjects. Body Shape2 had most parts near average sizes for overweight body shapes with short height and arms that represented 37.6% of the subjects (the highest ratio). Body Shape3 was the smallest body shape in the four groups with the most distinct body figure and represented 30.7% of the subjects. Body Shape4 (9.4% of the subjects)was the upper body obesity type (the fattest group)and with of the waist bigger abdominal obesity type.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.3
• /
• pp.233-238
• /
• 2008

In this paper, a shape design optimization method for linearly elastic problems is developed using isogeometric approach. In many design optimization problems for practical engineering models, initial raw data usually come from a CAD modeler. Then, designers should convert the CAD data into finite element mesh data since most of conventional design optimization tools are based on finite element analysis. During this conversion, there are some numerical errors due to geometric approximation, which causes accuracy problems in response as well as design sensitivity analyses. As a remedy for this phenomenon, the isogeometric analysis method can be one of the promising approaches for the shape design optimization. The main idea of isogeometric approach is that the basis functions used in analysis is exactly the same as the ones representing the geometry. This geometrically exact model can be used in the shape sensitivity analysis and design optimization as well. Therefore the shape design sensitivity with high accuracy can be obtained, which is very essential for a gradient-based optimization. Through numerical examples, it is verified that the shape design optimization based on an isogeometic approach works well.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.2
• /
• pp.107-118
• /
• 2006

Recently, Korean's 3-D foot data have been extensively collected through 5th national anthropometric survey known as 'Size Korea'. In this study, Korean foot shape was investigated and subsequently classified, based on the existing standard for foot shaping. This study analyzed and categorized Korean foot shapes through the following methods. Although the data used in this study were limited to those of Korean adults, major factors affecting the foot shape were deduced and then categorically grouped by the multivariate statistical analysis. For those whose age ranged from 14 to 70, major factors affecting the foot shape for the male were related to foot breadth, ankle thickness, 1st toe shape, malleolus height, heel to top of the foot length, the ratio between toe-side and heel-side and 5th toe shape. For the female, the ball of foot height was added to the above factors. From the factors extracted, the Korean foot shape was categorized into three groups for the male and four groups for the female. They were the ladder type, the inverted triangle type and the square type. For the female, the triangular type was added to the three types. These findings will serve as useful information for the footwear production industry in Korea.

• Journal of the Korean Society of Costume
• /
• v.57 no.5 s.114
• /
• pp.151-165
• /
• 2007

Appearance matters in society today. Women want to feel good and look their best. They do make-up, wear garment and accessory for their good looking. Doing make-up, we have to know how we are look and to consider face shape. But it is difficult to recognize face shape. Because there is no standard face shape of adult women of quantitative analysis. The purpose of this study was to offer standard face shape of adult women in Korea. Furthermore, the study was to determine and differentiate face shape of each age group to set the basic data for the Korean beauty industry. In this study, photographs of 600 Korean women, age between $20{\sim}50's$, were indirectly measured in Venus face2D program. The measurements were analyzed by statistical methods. As a result of basic statistical data analysis, the average lengths of face were 196mm, lengths of forehead-hairline between eyebrows were 62mm, lengths of eyebrow between noses were 68mm, length of nose between chin were 66mm, and width of face were 150mm. By comparing to each age group's face using ANOVA, the statistically noticeable differences were found in measurements.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.22 no.1
• /
• pp.1-13
• /
• 2020

The purpose of this study is to create a 3D avatar from 3D human body shape data using the CLO 3D virtual clothing program and to verify the feasibility of avatar production using the virtual clothing system for verifying size and shape. The research method was to select one virtual representative model that is the closest to the mean size of each body item for each age group. Using the 3D human body scan shape of a 40-69 years old male was applied to the CLO 3D virtual wearing system. Using the CLO 3D Avatar conversion menu, we verified the feasibility of creating a 3D avatar that reproduces the human body scan shape. In the dimension comparison between the 3D avatar and the fictitious representative model, the dimension difference was noticeable in height, circumference, and length. However, as a result, the converted 3D avatar showed less than a 5% difference in most human dimensions. In addition, since the body shape and posture were reproduced similarly, the utilization of the avatar was verified.

• Journal of Korea Multimedia Society
• /
• v.21 no.7
• /
• pp.755-763
• /
• 2018

In this paper, for recognize a night pedestrian from an infrared video, a new method differentiated from the existing feature vector is proposed and experimented. The new approach focuses on the shape feature vector of the structure and shape of the pedestrian image divided by the human body seven split ratio. The pedestrian images are divided into 7 square blocks from the still image of the preprocessing process. And to reduce the dimension, the square block is converted into a mosaic block. The scalar and direction of the shape feature vector is calculated by the brightness and position of the element in the mosaic. For practicality of infrared video system, the proposed method simplifies the data to be processed by reducing the amount of data in the preprocessing in order to continuously batch process the entire system in real time. Through the experiments, we verified the validity of the proposed shape feature vector. In comparison to the existing method, we propose a new shape feature vector generation method as the feature vector for night pedestrian recognition.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.1
• /
• pp.76-83
• /
• 2016

The various model tests are carried out to estimate and verify a ship performance in the design stage. But in view of the cost, the model test should be applied to every project vessel is very inefficient. Therefore, other methods of predicting the maneuverability with confined data are required at the initial design stage. The purpose of this study is to estimate the hydrodynamic derivatives by using the multiple regression analysis and PMM test data. The characteristics of the stern shape which has an important effect on the maneuverability are applied to the regression analysis in this study. The correlation analysis is performed to select the proper hull form coefficients and stern shape factors used as the variables in the regression analysis. The comparative analysis of estimate results and model test results is conducted on two ships to investigate the effectiveness of the maneuvering hydrodynamic derivatives estimation applied the stern shape. Through the present study, it is verified that the estimation using the stern shape factors as the variables are valid when the stern shape factors are located in the center of the database.

• The Korean Journal of Applied Statistics
• /
• v.32 no.1
• /
• pp.15-27
• /
• 2019

The reliability of the data means the overall consistency of the measurement results. Methods for evaluating reliability have been continuously studied because it affects the results of the statistical analysis. Cronbach's ${\alpha}$ coefficient or intraclass correlation coefficient is used for reliability evaluation; however, these measures cannot be applied to data consisting of three-dimensional coordinates to represent an object. In this study, we propose a measure to evaluate the reliability of three dimensional shapes based on statistical shape analysis that is made possible by extracting the shape information from the measured three dimensional coordinates and decomposing the shape variation.

• Journal of Information Technology Applications and Management
• /
• v.25 no.4
• /
• pp.115-122
• /
• 2018

Software reliability has the greatest impact on computer system reliability and software quality. For this software reliability analysis, In this study, we compare and analyze the trends of the properties affecting the reliability according to the shape parameters of Erlang distribution based on the finite fault NHPP. Software failure time data were used to analyze software failure phenomena, the maximum likelihood estimation method was used for parameter estimation. As a result, it can be seen that the intensity function is effective because it shows a tendency to decrease with time when the shape parameters a = 1 and a = 3. However, the pattern of the mean value function showed an underestimation pattern for the true values when the shape parameters a = 1 and a = 2, but it was found to be more efficient when a = 3 because the error width from the true value was small. Also, in the reliability evaluation of the future mission time, the stable and high trend was shown when the shape parameters a = 1 and a = 3, but on the contrary, when a = 2, the reliability decreased with the failure time. Through this study, the property of finite fault NHPP Erlang model according to the change of shape parameter without existing research case was newly analyzed, and new research information that software developers can use as basic guideline was presented.