• 한국식품저장유통학회지
• /
• 제4권1호
• /
• pp.27-32
• /
• 1997

Natural convection in agricultural-products storage system was analysed theoretically, The storage system was modelled by Internally heated fluid saturated porous layer. Darcy's law was used to explain characteristics of fluid motion. Stability equations were obtained under the linear stability theory and transfer characteristics were modelled by the shape assumption. Based on the modelling of transfer characteristics, heat trasnfer correlations were derived theoretically.

• 복식문화연구
• /
• 제14권5호
• /
• pp.840-849
• /
• 2006

Breast volume has been approximately estimated under the assumption that the shape of breast is a corn. However, women's breast is more like a bulged bag in reality. In this paper, three methods of breast volume estimation were compared to find out the more accurate method. The shape of the breast is assumed as a hemisphere in the first estimation method and a corn in the second one. In the third method, arc along the cross sectional shape of breast was utilized in the calculation. Comparisons among the methods were made using the actual 3D volume measurement of thirty seven women's breast. As results, the third method was the best one for the normal breast type, especially for the lower part of the breast ($R^2=0.74$) which is the crucial design parameter of the brassiere. Assumption of the shape of breast as a corn was reasonably acceptable when the breast is sagged. It was expected that when women wore brassiere, the accuracy of the third method would increase more, since the shape of breast becomes more symmetrical.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2006년도 추계학술대회
• /
• pp.173-179
• /
• 2006

In order to explain a U-shape pattern of stock returns, Fama and French(1988) suggested the state-space model consisting of I(1) permanent component and AR(1) stationary component. They concluded the autoregression coefficient induced from the state-space model follow the U-shape pattern and the U-shape pattern of stock returns was due to both negative autocorrelation in returns beyond a year and substantial mean-reversion in stock market prices. However, we found negative autocorrelation is induced under the assumption that permanent and stationary noise component are independent in the state-space model. In this paper, we derive the autoregression coefficient based on ARIMA process equivalent to the state-space model without the assumption of independency. Based on the estimated parameters, we investigate the pattern of the time-varying autoregression coefficient and conclude the autoregression coefficient from the state-space model of ARIMA(1,1,1) process does not follow a U-shape pattern, but has always positive sign. We applied this result on the data of 1 month retums for all NYSE stocks for the 1926-85 period from the Center for Research in Security Prices.

• Water Engineering Research
• /
• 제1권1호
• /
• pp.11-23
• /
• 2000

Regional flood frequency analysis has been developed by employing the nearby site's information to improve a precision in estimating flood quantiles at the site of interest. In this paper, single site and regional flood frequency analyses were compared based of the 2-parameter Weibull model. For regional analysis, two approaches were employed. The First one is to use the asymptotic variances of the quantile estimators derived based of the assumption that all sites including the site of interest are independent each other. This approach may give the maximum regional gain due to the spatial independence assumption among sites. The second one in Hosking's regional L-moment algorithm. These methods were applied to annual flood data. As the results, both methods generally showed the regional gain at the site of interest depending on grouping the sites as homogeneous. And asymptotic formula generally shows smaller variance than those from Hosking's algorithm. If the shape parameter of the site of interest from single site analysis is quite different from that from regional analysis then Hosking's results might be better than the asymptotic ones because the formula was derived based on the assumption that all sites have the same regional shape parameter. Furthermore, in such a case, regional analysis might be worse than single site analysis in the sense of precision of flood quantile estimation. Even though the selected sites may satisfy Hosking's criteria, regional analysis may not give a regional gain for specific and nonexceedance probabilities.

• 소성∙가공
• /
• 제10권7호
• /
• pp.579-583
• /
• 2001

Shape changes of a workpiece in an Eulerian Finite Element analysis for the steady state, three-roll-stand shape rolling are modelled. Although an Eulerian analysis has many advantages for the steady state rolling problems, it necessitates an assumption about the unknown shape of the control volume. In almost all cases, the assumed control volume does not match the final shape and the control volume should be updated. This update can be accomplished by performing a free surface correction. The final shape of a material point, which has a spherical shape at the inlet, can be also predicted by integrating a deformation gradient along a stream line. Analyses of three-roll-stand shape rolling are performed and the results are discussed in detail.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.328-331
• /
• 2001

Shape changes of a workpiece in an Eulerian Finite Element analysis for the steady state. three-roll-stand shape rolling are modelled. Although an Eulerian analysis has many advantages for the steady state rolling problems, it necessitates an assumption about the unknown shape of the control volume. In almost all cases. the assumed control volume does not match the final shape and the control volume should be updated. This update can be accomplished by performing a free surface correction. The final shape of a material point, which has a spherical shape at the inlet, can be also predicted by integrating a deformation gradient along a stream line. Analyses of three-roll-stand shape rolling is in detail examined.

• 한국태양에너지학회 논문집
• /
• 제29권3호
• /
• pp.73-82
• /
• 2009

포화상태 핵비등과 저 Re수의 흐름비등에서 얻어진 실험결과를 바탕으로 하여, 기포가 성장하는 동안의 등가 기포 직경과 열전단율의 거동에 대한 기포 형상 가정의 효과를 제시하기 위한 해석적인 연구를 수행하였다. 이러한 목적을 달성하기 위하여, 등가 기포 반경이 기포가 성장하는 동안 촬영된 기포의 이미지로부터 얻어질 수 있는 형상 가정을 이용하여 계산되었다. 그리고 열전달율을 포화상태 핵비등 동안 미세크기의 히터와 휘스톤브리지 회로를 이용하여 측정하였다. 그리고, 기포 형상 가정의 효과를 실험결과와 비교하였고, 이를 통해 단일 기포의 성장 거동을 분석하기 위한 기포 형상 가정이 매우 중요함을 보였다.

• 대한원격탐사학회지
• /
• 제20권5호
• /
• pp.289-305
• /
• 2004

Atmospheric correction of Landsat Visible and Near Infrared imagery (VIS/NIR) over aquatic environment is more demanding than over land because the signal from the water column is small and it carries immense information about biogeochemical variables in the ocean. This paper introduces two methods, a modified dark-pixel substraction technique (path--extraction) and our spectral shape matching method (SSMM), for the correction of the atmospheric effects in the Landsat VIS/NIR imagery in relation to the retrieval of meaningful information about the ocean color, especially from Case-2 waters (Morel and Prieur, 1977) around Korean peninsula. The results of these methods are compared with the classical atmospheric correction approaches based on the 6S radiative transfer model and standard SeaWiFS atmospheric algorithm. The atmospheric correction scheme using 6S radiative transfer code assumes a standard atmosphere with constant aerosol loading and a uniform, Lambertian surface, while the path-extraction assumes that the total radiance (L/sub TOA/) of a pixel of the black ocean (referred by Antoine and Morel, 1999) in a given image is considered as the path signal, which remains constant over, at least, the sub scene of Landsat VIS/NIR imagery. The assumption of SSMM is nearly similar, but it extracts the path signal from the L/sub TOA/ by matching-up the in-situ data of water-leaving radiance, for typical clear and turbid waters, and extrapolate it to be the spatially homogeneous contribution of the scattered signal after complex interaction of light with atmospheric aerosols and Raleigh particles, and direct reflection of light on the sea surface. The overall shape and magnitude of radiance or reflectance spectra of the atmospherically corrected Landsat VIS/NIR imagery by SSMM appears to have good agreement with the in-situ spectra collected for clear and turbid waters, while path-extraction over turbid waters though often reproduces in-situ spectra, but yields significant errors for clear waters due to the invalid assumption of zero water-leaving radiance for the black ocean pixels. Because of the standard atmosphere with constant aerosols and models adopted in 6S radiative transfer code, a large error is possible between the retrieved and in-situ spectra. The efficiency of spectral shape matching has also been explored, using SeaWiFS imagery for turbid waters and compared with that of the standard SeaWiFS atmospheric correction algorithm, which falls in highly turbid waters, due to the assumption that values of water-leaving radiance in the two NIR bands are negligible to enable retrieval of aerosol reflectance in the correction of ocean color imagery. Validation suggests that accurate the retrieval of water-leaving radiance is not feasible with the invalid assumption of the classical algorithms, but is feasible with SSMM.

• 대한기계학회논문집
• /
• 제11권3호
• /
• pp.368-375
• /
• 1987

본 연구에서는 이러한 기하형태의 불규칙성을 쉽게 고려할 수 있는 윤곽좌표계 (body fitted coordinate systems)를 이용하여 다공성 물질의 유효열전도율을 결정하 는 방법을 제시하였다.기공의 형상을 원형으로 가정하고 기공율과 기공 내부기체와 고체의 열전도율비 등의 변수가 유효열전도율과 이들 변수의 상관관계식을 제안하였으 며, 또한 핵연료 소결체와 같은 실제적인 다공성 물질의 유효열전도율을 해석하는데 좀 더 타당한 타원형 형상의 기공 가정방법을 제시하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제14권4호
• /
• pp.67-71
• /
• 1990

The traditional finite element method applied to dynamic problems employs shape functions which are based on a static displacement assumption. The more exact approach uses frequency-dependent shape functions and frequency-dependent mass and stiffness matrices. Such matrices are developed for a torsional vibration of shaft element. Numerical examples are presented for a cantilever beam.