• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2515-2517
• /
• 1998

The micro fresnel lens(MFL) was modeled and fabricated on a XY-stage electrostatically driven by comb actuator. The modeled MFL was approximated as a step shape with 4-phase and 4-zone plate. The focal length and diameter of the MFL is 20mm and 912${\mu}m$, respectively. The XY-stage suspending the MFL is designed to generate a large static displacement up to about 20${\mu}m$. On SOI substrates, we first fabricated MFL using the RIE(reactive Ion etching) technology and then patterned and etched bulk silicon to make XY-stage. After the fabrication of all structures on top side of the SOI substrates. $Si_3N_4$ was deposited for passivation of all structures using PECVD(plasma enhanced chemical vapor deposition). All the MFL systems width comb drive actuator were released by KOH etching from the bottom side of the SOI wafer using double-sided alignment technique. In fabrication of MFL, a dry etching conditions is established in order to improve surface roughness and to control the etched depth.

• 한국컴퓨터정보학회논문지
• /
• 제23권4호
• /
• pp.57-64
• /
• 2018

In this paper, we propose the automatic detection method for individual region separation using panorama image. Finding areas that contain individual teeth is one of the most important tasks in automating 3D models through individual tooth separation. In the conventional method, the maxillary and mandibular teeth regions are separated using a straight line or a specific CT slide, and the tooth regions are separated using a straight line in the vertical direction. In the conventional method, since the teeth are arranged in a curved shape, there is a problem that each tooth region is incorrectly detected in order to generate an accurate tooth region. This is a major obstacle to automating the creation of individual tooth models. In this study, we propose a method to find the correct tooth curve by using the jawbone curve which is very similar to the tooth curve in order to overcome the problem of finding the area containing the existing tooth. We have proposed a new method to accurately set individual tooth regions using the feature that individual teeth are arranged in a direction similar to the normal direction of the tooth alignment curve. In the proposed method, the maxillary and mandibular teeth can be more precisely separated than the conventional method, and the area including the individual teeth can be accurately set. Experiments using real dental CT images demonstrate the superiority of the proposed method.

• Bulletin of the Korean Chemical Society
• /
• 제31권12호
• /
• pp.3697-3702
• /
• 2010

We demonstrate that vertically aligned carbon nanotubes can be synthesized directly on tantalum substrate via water-assisted chemical vapor deposition and evaluate their properties as electrochemical capacitors. The mean diameter of the carbon nanotubes was $7.1{\pm}1.5\;nm$, and 70% of them had double walls. The intensity ratio of G-band to D-band in Raman spectra was as high as 5, indicating good quality of the carbon nanotubes. Owing to the alignment and low equivalent series resistance, the carbon nanotube based supercapacitors showed good rate performance. Rectangular shape of cyclic voltammogram was maintained even at the scan rate of > 1 V/s in 1 M sulfuric acid aqueous solution. Specific capacitance was well-retained (~94%) even when the discharging current density dramatically increased up to 145 A/g. Consequently, specific power as high as 60 kW/kg was obtained from as-grown carbon nanotubes in aqueous solution. Maximum specific energy of ~20 Wh/kg was obtained when carbon nanotubes were electrochemically oxidized and operated in organic solution. Demonstration of direct synthesis of carbon nanotubes on tantalum current collectors and their applications as supercapacitors could be an invaluable basis for fabrication of high performance carbon nanotube supercapacitors.

• Applied Microscopy
• /
• 제28권4호
• /
• pp.491-502
• /
• 1998

The present study was conducted to investigate the structural changes in rat cornea. Sixty eyes from one-day-old uneyed rats, fourty eyes from 4-weeks-old rats, and foully eyes from 10-weeks-old adult rats were used. With the increase of age, the epithelial layer was thickened by the addition of new successive cellular layers. Then, the new-born rat's epithelial cells formed a pentagonal shape, and the quality of decidual cells showed a high electron-density, although the boundary between cells was distinctive. The newly produced cells showed a low electron-density so that there was the distinctive difference between light and darkness. In Bowman's layer, collagen fibrils demonstrate a regularly arranged structure along with the age. In stroma's layer, the density of keratocytes was decreased and thereby Progressively flattened during the development. The collagenous layer of the adult rats was more distinctive than that of the new-born rats in a form of parallel alignment running vertically and horizontally.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.274.2-274.2
• /
• 2013

We described a simple and efficient fabrication method for generating microfluidic channels with a circular-cross sectional geometry by exploiting the reflow phenomenon of a thick positive photoresist. Initial rectangular shaped positive photoresist micropatterns on a silicon wafer, which were fabricated by a conventional photolithography process, were converted into a half-circular shape by tuning the temperature to around $105^{\circ}C$. Through optimization of the reflow conditions, we could obtain a perfect circular micropattern of the positive photoresist, and control the diameter in a range from 100 to 400 ${\mu}m$. The resultant convex half-circular photoresist was used as a template for fabricating a concave polydimethylsiloxane (PDMS) through a replica molding process, and a circular PDMS microchannel was produced by bonding two half-circular PDMS layers. A variety of channel dimensions and patterns can be easily prepared, including straight, S-curve, X-, Y-, and T-shapes to mimic an in vivo vascular network. To inform an endothelial cell layer, we cultured primary human umbilical vein endothelial cells (HUVECs) inside circular PDMS microchannels, and demonstrated successful cell adhesion, proliferation, and alignment along the channel.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• 제3권1호
• /
• pp.47-53
• /
• 2022

The escape behavior of prey fish to predator attack is directly linked to the survival of the fish. In this study, I explored the escape behavior of Medaka fish to bird attacks. To simulate the attack, I designed a model triangular-shaped bird to slide along a fishing line connected between rods at both ends of the tank. The triangular shape was set to 10×15 (S=1), 15×20 (S=2), and 20×25 cm (S=3) with base×height. The slope (θ) of the fishing line, which determines the attack speed of the model bird, was set to values of 15° (θ=1), 30° (θ=2), and 45° (θ=3). The escape behavior was characterized using five variables: escape speed (ν), escape acceleration (α), responsiveness (γ), branch length similarity entropy (ε), and alignment (ϕ). The experimental results showed when (S, θ)=(fixed, varied), the change in values of the five variables were not significant. Thus, the fish respond more sensitively to S than to θ In contrast, when (S, θ)=(varied, fixed), ν, α, and γ showed increasing trends but ε and ϕ did not change much. This indicates the nature of fish escape behavior irrespective of the threat is inherent in ε and ϕ. I found that fish escape behavior can be divided into two types for the five physical quantities. In particular, the analysis showed that the type was mainly determined by the size of the model bird.

• 공업화학전망
• /
• 제24권6호
• /
• pp.19-31
• /
• 2021

자극응답성 액정 엘라스토머(liquid crystal elastomer)는 하이드로겔(hydrogel), 형상 기억 고분자(shape memory polymer)와 더불어 생체 특성을 모방한 인공 근육, 소프트 액추에이터 및 소프트 로봇을 위한 스마트 소재로 최근 높은 관심을 받고 있다. 특히, 액정 엘라스토머는 고무 탄성과 액정 이방성이 결합된 비등방성 탄성 고분자로, 열, 빛, 전기 및 수분과 같은 외부자극에 반응하여 가역적이며, 액정 분자들의 배향조절을 통한 프로그램된 변형이 가능하다. 액정 엘라스토머가 개념 증명을 하는 수준을 넘어 실제로 유용한 소프트 액추에이터 및 로봇 시스템에 적용되기 위해서는 우수한 구동력 및 작업 용량, 높은 구동 변형률, 빠른 응답 시간, 낮은 구동 온도, 다양한 외부 자극반응성 및 높은 에너지 전환 효율 등을 확보하는 것이 중요하다. 본 기고문에서는 액정 엘라스토머의 개념에 대해 소개하고, 이러한 소재가 소프트 액추에이터로써 광범위하게 활용될 수 있도록 다양한 성능들을 향상시킬 수 있는 방법에 대해 소개하고자 한다.

• ALGAE
• /
• 제37권1호
• /
• pp.15-32
• /
• 2022

Inspecting herbaria collections of Laurencia rigida highlighted frequent misidentifications between L. rigida and L. heteroclada f. decussata, two poorly studied taxa from Australia. Recent collections of DNA material, including from topotype material, allowed for re-examination of these two taxa using molecular techniques. Detailed morphological and molecular analyses based on two markers (rbcL and COI-5P) strongly supported these two taxa as being distinct from each other and requiring nomenclatural changes. Comprehensive morphological analyses highlighted features useful for accurate identifications. Interestingly, L. rigida was found to belong to the genus Palisada with evidence from both the morphology and molecular data. Therefore, this study proposed recognizing L. rigida as Palisada rigida comb. nov. Molecular data for L. heteroclada f. decussata on the other hand supported its separation from L. heteroclada, with too great a molecular distance to be considered a variety. Morphological characters that best separated P. rigida from L. decussata included seven characters; number of pericentral cells per vegetative axial segment, the presence of secondary pit connections, the presence of lenticular thickenings, tetrasporangia alignment, the presence of corps en cerise, holdfast morphology, and overall plant shape. Morphologically, L. heteroclada f. decussata was also separated from L. heteroclada, particularly by the following characteristics; ultimate branchlets morphologies, lower order branch lengths, primary axis and holdfast morphologies. Therefore, it was proposed that L. heteroclada f. decussata is recognized at a species level as L. decussata comb. et stat. nov.

• 천문학회보
• /
• 제44권2호
• /
• pp.48.2-48.2
• /
• 2019

Light from universe is absorbed, scattered, and re-released by interstellar dust before it reaches us. Therefore, accurate correction of the observed light requires not only spatial distribution of interstellar dust, but also information on absorption and scattering for each wavelength. Far-ultraviolet (FUV) light is mainly produced by bright, young O-type and some B-type stars, but it is also observed in interstellar space without these stars. Called FUV Galactic light (DGL), these lights are mostly known as starlight scattered by interstellar dust. With the recent release of GAIA DR2, not only accurate distance information of stars in our Galaxy, but also accurate three-dimensional distribution maps of interstellar dust of our Galaxy were produced. Based on this, we performed 3-dimensional Monte Carlo dust scattering radiative transfer simulations for FUV light to obtain dust scattered FUV images and compared them with the observed FUV image obtained by FIMS and GALEX. From this, we find the scattering properties of interstellar dust in our Galaxy and suggest the intensity of extragalactic background light. These results are expected to aid in the study of chemical composition, size distribution, shape, and alignment of interstellar dust in our Galaxy.

• 대한교통학회지
• /
• 제21권1호
• /
• pp.127-136
• /
• 2003

본 연구는 3차원의 실제 도로형상을 고려하여 일관성을 평가하는 방법으로 가속도 개념을 사용하였다. 차량의 운행과 운전자가 받는 느낌을 근거로 가속도는 안전에 커다란 영향을 미친다. 특히. 운전자를 중심으로 가속도의 크기는 상당한 영향 요소로서 작용되어진다. 이를 근거로 3차원 도로상에서의 각 지점의 가속도를 계산하고 일관성 평가 방법을 제시하였다. 가속도의 계산은 3차원의 변위를 각각 계산하여 변위에 대한 벡터의 합으로 정의하였고 곡선부 내에 속도 예측모형(정준화, 2001)을 사용하여 속도 프로파일을 작성하고 이 프로파일을 근거로 각 지점의 속도를 정하여 가속도를 구하였다. 일관성 평가는 기존의 연구에서 3차원 가속도의 범위를 정하고 g-g-g diagram을 작성하여 해당 범위에 벗어나는 것을 일관성에 어긋나는 것으로 간주하고 평가의 방법을 제시하였다. 본 연구에서는 최소 설계 기준을 바탕으로 가상의 도로를 예시로 들어 가속도의 변화를 계산함으로서 일관성 평가 방법을 적용하였으나 해당 방법이 한계가 드러나 있는 기존의 속도 예측모형을 사용하고 있어 기타의 차량 상태(서스펜션, 타이어, 차종 등)를 고려하지 못하기에 정확한 가속도의 값을 제시하지는 못한 실정이다. 그러나 속도 프로파일만 정의되어지면 복합곡선, 완화곡선 등의 모든 도로형상에 대하여 가속도를 계산함으로서 이를 도로의 일관성 평가에 사용이 가능할 것이나 현재는 3차원 형상이 고려된 속도예측모형과 복합선형 등이 고려된 속도예측모형을 제시할 수 있을 것이다. 향후에는 이러한 속도예측모형이나 속도프로파일모형에 관한 연구가 계속 이루어져야 하고 실험차량을 통한 일관성 평가의 정확한 기준의 개발과 검증이 요구된다.