• 대한토목학회논문집
• /
• 제38권2호
• /
• pp.349-356
• /
• 2018

본 논문은 국내에서 연구가 미진한 적재설비의 지진 취약도 평가에 적용할 수 있는 FE 해석 기반의 연결부 모델을 개발하는데 목적이 있다. 이러한 목표를 달성하기 위하여, 적재설비 거동을 파악하기 위한 진동대 실험과 Modal Test, 그리고 구성 부재를 대상으로 한 다양한 부재실험(8가지 Push-over Test)을 진행하였다. 실험결과를 바탕으로 지진취약도 평가에 적용하기 위한 적재설비의 연결부 모델을 개발하기 위하여, NX-Nastran 프로그램을 활용하여 연결부의 상세 모델링을 진행하였다. 특히, 단순 걸쇠 방식으로 연결되는 기둥 부재와 보 부재의 연결을 모사하기 위하여 면대면 표면접촉 요소와 스프링 요소를 적용하였으며, 스프링 요소의 모델은 ARX (Auto Regressive eXogenous) 기반의 수학적 모델을 개발하여 적용하였다. FE 모델 기반의 simulation 결과는 부재 실험 결과와 비교하였을 때, 상호 오차율 8% 미만의 우수한 신뢰도를 보여주었다. 결과적으로 연구에서 개발한 FE해석 기반의 연결부 모델은 적재설비의 지진 취약도 평가를 위한 해석 모델에 활용될 수 있음을 확인하였다.

• 콘크리트학회논문집
• /
• 제17권6호
• /
• pp.975-982
• /
• 2005

면진은 현재 설치 공법의 단순함 그리고 지진하중에 대한 진동제어 효과의 탁월성 등으로 인하여 세계 여러 나라에서 강진으로부터 중요한 건물들을 보호하고, 구조물의 장수명화와 내진성능 향상을 도모하기 위한 실무적인 해결책으로서 받아들여지고 있다. 하지만, 국내의 경우, 재해 시 항상 문제가 되는 정보, 통신, 의료체계 및 사회공공 시설물의 피해로 인한 혼란 방지라는 차원에서 면진 구조의 도입이 종종 거론되고는 있으나 아직까지 구체적인 설계기술은 정착되지 못하고 있는 실정이다. 따라서 본 연구에서는 면진 기술의 국내 기반 구축을 위하여 순수 국내기술에 의해 제작된 면진 장치(NRB)를 채용함에 따른 면진 효과를 실험적으로 검증함으로서, 향후 유사 구조 설계를 위한 기초 자료를 제공하고자 하였으며, 철근콘크리트 구조를 대상으로 지진파의 특성 및 지진동의 입력 레벨에 따른 면진 효과가 US 축소 모델 진동대 실험을 통해 제시되었다. 실험 결과, 본 연구에서 적용한 NRB는 응답가속도의 감소와 층 전단력의 감소가 확실히 관측되어 면진 설계의 기본 개념과 일치하게 건물의 주기를 장주기 영역으로 이동시켜 지진동에 의한 하중 효과를 크게 줄일 수 있는 것으로 나타났으며, 면진 효과는 지진파의 특성에 따라 그 정도의 차가 다르게 나타나는 것으로 확인되었고, 장주기 성분이 많이 포함되어 있는 Mexico지진파와 같은 지진동 고려 시 특히 설계허용수평변위 설정에 주의가 필요한 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제58권1호
• /
• pp.121-142
• /
• 2016

The national standard being used in Turkey for suspended ceiling systems (SCS) regulates material and dimensional properties but does not contain regulations regarding installation instructions which cause substandard applications of SCSs in practice. The lack of installation instructions would potentially affect the dynamic performance of these systems. Also, the vast majority of these systems are manufactured using substandard low-quality materials, and this will inevitably increase SCS related damages during earthquakes. The experimental work presented here focuses on the issue of dynamic performance of SCSs with different types of carrier systems (lay-on and clip-in systems), different weight conditions, and material-workmanship qualities. Moreover, the effects of auxiliary fastening elements, so called seismic perimeter clips, in improving the dynamic performance of SCSs were experimentally investigated. Results show that clip-in ceiling system performs better than lay-on system regardless of material and workmanship qualities. On the other hand, the quality aspect becomes the most important parameter in affecting the dynamic performance of lay-on type systems as opposed to tile weights and usage of perimeter clips. When high quality system is used, tile weight does not change the performance of lay-on system, however in poor quality system, tile weight becomes an important factor where heavier tiles considerably decrease the performance level. Perimeter clips marginally increase the dynamic performance of lay-on ceiling system, but it has no effect on the clip-in ceiling system under the shaking levels considered.

• Structural Engineering and Mechanics
• /
• 제24권3호
• /
• pp.275-290
• /
• 2006

In this paper, the performance of a tuned liquid damper (TLD) in suppressing the seismic response of buildings is investigated with shake table testing of a four-story steel frame model that rests on pile foundation. The model tests were performed in three phases with the steel frame structure alone, the soil and pile foundation system, and the soil-foundation-structure system, respectively. The test results from different phases were compared to study the effect of soil-structure interaction on the efficiency of a TLD in reducing the peak response of the structure. The influence of a TLD on the dynamic response of the pile foundation was investigated as well. Three types of earthquake excitations were considered with different frequency characteristics. Test results indicated that TLD can suppress the peak response of the structure up to 20% regardless of the presence of soils. TLD is also effective in reducing the dynamic responses of pile foundation.

• 한국지진공학회논문집
• /
• 제27권1호
• /
• pp.1-12
• /
• 2023

Structures of high-rise buildings are less prone to earthquake damage. This is because the response acceleration of high-rise buildings appears to be small by generally occurring short-period ground motions. However, due to the increased construction volume of high-rise buildings and concerns about large earthquakes, long-period ground motions have begun to be recognized as a risk factor for high-rise buildings. Ground motion observed on each floor of the building is affected by the eigenmode of the building because the ground motion input to the building is amplified in the frequency range corresponding to the building's natural frequency. In addition, long-period components of ground motion are more easily transmitted to the floor or attached components of the building than short-period components. As such, high-rise buildings and non-structural components pose concerns about long-period ground motion. However, the criteria (ASCE 7-22) underestimate the acceleration response of buildings and non-structural components caused by long-period ground motion. Therefore, the characteristics of buildings' acceleration response amplification ratio and non-structural components were reviewed in this study through shake table tests considering long-period ground motions.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.112-119
• /
• 2000

the shaking table tests for 5 different model sections are performed to investigate the behaviors of quay walls during earthquakes and to evaluate the seismic performance of quay walls with countermeasures. 5 different model sections describe the cases of dense soil and loose soil in the foundation repectively the case to which gravel backfill was applied and the cases to which light material replacement method and sand compction pile method was applied repectively for sesmic countermeasure methods. Pore water pressures accelerations and deformations in quay walls and grounds are analyzed. As a result the softening of foundation and backfill soils have much influence on the behaviors of quay walls. Also light material replacement method and sand compaction pile method are effective in improving the seismic performance of quay walls.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.185-190
• /
• 2001

The severe shortage of the available sites in the highly developed downtown area in Korea necessitates the construction of high-rise buildings which meet the need of residence and commercial activity simultaneously. The objective of this study is to investigate the seismic performance of this type of building structures. For this purpose, two 1:12 scale 17-story reinforced concrete model structures were constructed according to the similitude law, in which the upper 15 stories have a bearing-wall system while the lower 2-story frames with infilled shear wall have two different layouts of the plan : The one has symmetric plan and the other has unsymmetric plan. Then, this model was subjected to a series of earthquake excitations. The test results show that the layout of shear wall has the negligible effect on the natural period and the base shear coefficient, but great effect on the failure mode of beam-column joint at flexible side frame.

• 국제초고층학회논문집
• /
• 제5권3호
• /
• pp.213-220
• /
• 2016

The "China Zun" tower in Beijing will rise to 528 meters in height and will be the tallest building in Beijing once built. Inspired by an ancient Chinese vessel, the "Zun", the plan dimensions reduce gradually from the bottom of the tower to the waist and then expand again as it rises to form an aesthetically beautiful and unique geometry. To satisfy the structural requirement for seismic and wind resistance, the structure is a dual system composed of a perimeter mega structure made of composite mega columns, mega braces, and belt trusses, and a reinforced-concrete core with steel plate-embedded walls. Advanced parametric design technology is applied to find the most efficient outer-perimeter structure system. The seismic design basically follows a mixed empirical and performance-based methodology that was verified by a shaking table test and other specimen lab tests. The tower is now half-way through its construction.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.140-143
• /
• 2003

Recently, many high-rise reinforced concrete (RC) bearing wall structures of multiple occupancy have been constructed, which have the irregularities of weak (or soft) story and torsion at the lower stories simultaneously. The study compared the eccentricity of such a building predicted by design codes, EC 8, IBC 2000 and UBC 97, and by the test results through a series of shaking table tests of 1:12 model. Based on the comparison of the predicted eccentricity and the test result, the conclusions are drawn as follow: Accidental torsion due to the uncertainty on the properties of structure can be reasonably predicted by using the dynamic analysis with the center of mass being shifted by 5 percent of the dimension of the building perpendicular to the direction of the excitations than by using equivalent lateral force procedure

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.407-414
• /
• 2001

The severe shortage of the available sites in the highly developed downtown area in Korea necessitates the construction of high-rise buildings which meet the need of residence and commercial activity simultaneously. The objective of this study is to investigate the seismic performance of this type of building structures. For this purpose, two 1 :12 scale 17-story reinforced concrete model structures were constructed according to the similitude law, in which the upper 15 stories have a bearing-wall system while the lower 2-story frames have two different layouts of the plan The one is a moment-resisting frame system and the other is a moment-resisting frame system with a infilled shear wall. Then, this model was subjected to a series of earthquake excitations. The test results show that the existence of shear wall reduced the shear deformation at the piloti frame, but has almost the negligible effect on the reduction of the overturning-moment angle.