• 설비공학논문집
• /
• 제19권7호
• /
• pp.491-499
• /
• 2007

An architectural means of optimal daylight distribution is by using so-called light shelf systems, horizontal shading and redirecting devices. The overall performance of the daylighting system can be improved by the incorporation with electric lighting control devices. This paper aims to exemplify the benefit of daylighting in term of economic consideration. In such a case a reasonable technique to compare system costs is by life-cycle costing. Stated simply, a life-cycle cost represents the total cost of a system over its entire life cycle, that is, the sum of first cost and all future costs. Four different electric lighting system designs are proposed and a lighting control system that is continuously operating according to the level of daylight in the space has been adapted. The result shows clearly that although denser layout of lighting fixtures might be more effective to interface to the level of daylight ceaselessly changeable, its economic benefit may not meet the expected criterion the reason of increased initial investment and maintenance cost for the fixtures and control devices.

• 설비공학논문집
• /
• 제16권10호
• /
• pp.960-968
• /
• 2004

One of the most important functions of a building is to provide thermally comfortable indoor environmental conditions for the occupants. Therefore, a great deal of energy is consumed for heating and cooling to satisfy those thermal requirements. In order to provide thermal comfort with minimum heating and cooling energy consumption, optimal design of building affecting indoor climate is required. This study used the TRNSYS for modeling and simulation of the energy flows of residential building types, and examined the energy efficient measures to reduce the thermal loads. The residential building types are classified into the detached house, apartment house and high-rise residential complex. The results of the simulation show that the heating energy consumption in the detached house is especially high, whereas the cooling load is an important determinant in the apartment house and high-rise residential complex. The measures examined are the insulation thickness, various types of glazing, infiltration, natural and controlled ventilation, solar shading, orientation and etc. Comparative evaluations and sensitivity analyses revealed the effects of these variables and identified their energy efficient building design strategies.

• 한국물환경학회지
• /
• 제37권6호
• /
• pp.449-457
• /
• 2021

Photosynthesis and respiration rate of microalgae are important factors during advanced wastewater treatment research using microalgae, There are several equipments and measurement methods for measuring photosynthesis and respiration, with different challenges that occur during pretreatment and stabilization of the analysis process. Therefore, in this study, for accurate Photosynthesis and Respiration (P&R) analyzer measurement, the analysis process was divided into pre-processing, DO stabilization, and analysis stages and each was optimized to enable accurate evaluation. For this purpose, the effect of DO saturation of the sample on P&R analysis, DO stabilization according to the degassing flow rate, and photoinhibition of the OD level on photosynthesis was investigated. Based on our study results, when DO was supersaturated, photosynthetic efficiency decreased due to photorespiration, making it inappropriate as a P&R sample. In addition, 0.5 L-N2/min level was the optimal nitrogen degassing flow rate for DO desaturation. The inhibition of photosynthetic efficiency by self-shading caused by the increase in OD was observed from OD 2.0, and it was found that P& R analysis is preferably performed on samples with OD less than 2.0. In addition, based on the above three optimization results, an optimized P&R Analyzer instruction for accurate P&R analysis was also presented.

• 한국재료학회지
• /
• 제27권10호
• /
• pp.518-523
• /
• 2017

In commercial solar cells, the pattern of the front electrode is critical to effectively assemble the photo generated current. The power loss in solar cells caused by the front electrode was categorized as four types. First, losses due to the metallic resistance of the electrode. Second, losses due to the contact resistance of the electrode and emitter. Third, losses due to the emitter resistance when current flows through the emitter. Fourth, losses due to the shading effect of the front metal electrode, which has a high reflectance. In this paper, optimizing the number of finger on a $4{\times}4$ solar cell is demonstrated with known theory. We compared the short circuit current density and fill factor to evaluate the power loss from the front metal contact calculation result. By experiment, the short circuit current density($J_{sc}$), taken in each pattern as 37.61, 37.53, and $37.38mA/cm^2$ decreased as the number of fingers increased. The fill factor(FF), measured in each pattern as 0.7745, 0.7782 and 0.7843 increased as number of fingers increased. The results suggested that the efficiency(Eff) was measured in each pattern as 17.51, 17.81, and 17.84 %. Throughout this study, the short-circuit current densities($J_{sc}$) and fill factor(FF) varied according to the number of fingers in the front metal pattern. The effects on the efficiency of the two factors were also investigated.

• 한국자원식물학회지
• /
• 제27권2호
• /
• pp.174-182
• /
• 2014

본 연구는 희귀식물 연화바위솔과 희귀특산식물 울릉연화바위솔의 종 보존을 위해 양질의 규격묘 생산방법을 구명하고자 토양종류와 광 조건이 규격묘 생산에 미치는 영향을 살펴보았다. 그 결과 연화바위솔과 울릉연화바위솔 모두 클라스만 토양에서 우수한 생육특성을 나타냈다. 광 조건에 따른 연화바위솔의 생육특성은 무차광 처리와 적색과 청색 LED 혼합처리조건에서 우수한 생육특성을 보였으며, 울릉연화바위솔은 LED 혼합처리조건과 50% 차광처리조건에서 우수한 생육특성을 나타냈다. 울릉연화바위솔은 기간이 경과함에 따라 마사토에서 생존율이 통계적으로 유의성 있게 감소하였다. 각각의 생육특성과 생존율간의 상관분석 결과 연화바위솔은 초장과 엽장, 지상부생체중 사이에 0.8 이상의 상관관계를 나타냈다. 울릉연화바위솔도 초장과 엽폭, 엽장 사이에 0.8 이상의 상관관계를 보였으며, 초장과 지상부 생체중 사이에 0.65 이상의 상관관계를 나타내 초장이 지상부 생육특성을 대표한다는 것을 알 수 있었다. 특히 연화바위솔과 울릉연화바위솔 모두 1차 측정 생존율과 2차 측정 생존율 사이에 0.8 이상의 상관관계를 보여 초기 유묘 초장과 생존율 관리가 양질의 규격묘 획득에 가장 높은 영향을 미치는 것으로 나타났다. 따라서 연화바위솔과 울릉연화바위솔을 3월 중순에 파종하여 30일 후 지상부 2 mm, 지하부 3 mm 이상 되는 유묘를 클라스만 상토가 충진된 72구 트레이에 이식하고 적색과 청색의 LED 혼합처리조건에 35일 간 육묘하면 초장과 근장이 각각 2.5~4 cm, 3~5 cm 이상 되고 엽수가 11매 이상 되는 규격묘를 생산할 수 있는 것으로 나타났다.

• 한국지구과학회지
• /
• 제40권2호
• /
• pp.119-134
• /
• 2019

기상청 일사관측소 관측환경 분석을 위하여 수치표고모델(DEM)과 태양복사모델을 이용하여 주변지형에 의한 차폐와 하늘시계요소(SVF) 및 일사량을 산출하였다. 지형고도자료(10 m 해상도)를 통해 관측소를 중심으로 주변 25 km내의 지형들을 이용하여 스카이라인과 SVF를 계산하였다. 또한, 일사관측소별 산출된 천기도와 스카이라인을 중첩하여 지형에 의한 차폐를 분석하였다. 특히 인천 관측소는 주변지형의 차폐가 적었고 청송군과 추풍령 관측소는 주변 지형에 의한 차폐가 큰 관측소로 나타났다. 태양복사모델을 이용하여 동일 조건에서 지형 특성에 따른 일사량을 산출하여 지형에 의한 기여도를 분석하였다. 연누적 일사량 계산결과, 청송군 관측소의 경우 수평면 일사량과 비교하였을 때 직달일사량은 12.0% 이상 차폐되었고 산란일사량은 5.6% 그리고 전천일사량은 4.7% 감소하였다. 평균 일누적 일사량을 기준으로 편차를 분석하였을 때 0.3% 이상 전천일사량이 감소되는 지점은 6개 관측소였다. 42개 관측소 중 8소는 관측소의 이전 또는 관측장비의 이동설치가 시급한 것으로 분석되었고 1/2 이상(24소)의 관측소는 일사관측환경에 대한 검토가 필요한 것으로 분석되었다. DEM자료는 관측소 주변의 인공구조물과 식생 등이 포함되지 않기 때문에 더 상세한 관측환경분석이 요구된다.

• 한국실내디자인학회논문집
• /
• 제21권4호
• /
• pp.114-120
• /
• 2012

There are lots of buildings which were built before the Legislation on building energy rating system. Remodeling of the buildings would be required for an improvement of the building energy rating system was enforced by the government. In the Passive Building Design, Elements which will be used for the remodeling are Insulation, Window, External venetian blind, Heat exchanger. The Purpose of this study is to indicate a Method for the improvement of Energy saving by an analysis of Construction Cost, Cost Evaluation, Energy performance Efficiency in applied design elements. In this study, the remodeling of existing public buildings to improve energy efficiency rating was applied to extract the elements of design-specific energy performance, efficiency, and the application of the designs that has been analyzed. The results were as follows: applying the design-specific cost-effective investment that represents the economy (investment efficiency/%) surveyed the average insulation(7.0%), triple glazed windows(10.1%), double glazed windows(12.1%), external shading(24.5%), and Heat(77.2%) were analyzed in order to be more efficient. Analysis of the basis of information on the existing public buildings to improve energy efficiency rating for the remodeling depending on driving conditions at a degree of individual difference. The main effect, however, depending on economic investment, design elements, heat exchangers, external awning, double glazed windows, triple glazed windows, insulation, is recommended as review of the order shall be determined.

• 콘크리트학회논문집
• /
• 제17권3호
• /
• pp.361-368
• /
• 2005

이 연구의 목적은 디지털 카메라나 비디오 카메라로 촬영된 콘크리트 표면 균열 화상에서 컴퓨터가 자동으로 균열을 검출하고 균열의 폭, 길이, 방향을 계산할 수 있는 알고리즘을 개발하는 것이다. 개발한 알고리즘의 기본 구조는 기존의 연구 결과들과 유사하며, 기존 연구들과의 차이점은 다음과 같다 (1) 빈의 영향을 제거하기 위한 모폴로지 기법의 적용, (2) 개선된 이진화 기법과 형상 분석을 통한 검출 성능 향상, (3) 폭, 길이, 방향 계산을 위한 세부 알고리즘을 제시한 것이다. 제시한 알고리즘의 유효성을 검증하기 위하여 MATLAB 언어를 이용하여 알고리즘을 구현하였으며, 디지털 카메라를 통하여 얻은 실제 균열 화상을 사용하여 시험하였다. 시험결과는 제시한 알고리즘이 균열을 정확히 검출할 수 있음을 나타냈으며, 이 연구에서 제시한 방법으로 계산한 균열의 폭, 길이, 그리고 방향의 값을 균열 폭 측정 현미경, 자, 그리고 각도기로 계측한 값과 비교한 결과 거의 일치된 결과가 나타났다.

• 한국태양에너지학회 논문집
• /
• 제27권4호
• /
• pp.1-9
• /
• 2007

Sensitivity analysis of wind resource micrositing has been performed through the application case at the Antarctic King Sejong station with the most representative micrositing softwares: WAsP, WindSim and Meteodyn WT. The wind data obtained from two met-masts separated 625m were applied as a climatology input condition of micro-scale wind mapping. A tower shading effect on the met-mast installed 20m apart from the warehouse has been assessed by the CFD software Fluent and confirmed a negligible influence on wind speed measurement. Theoretically, micro-scale wind maps generated by the two met-data located within the same wind system and strongly correlated meteor-statistically should be identical if nothing influenced on wind prediction but orography. They, however, show discrepancies due to nonlinear effects induced by surrounding complex terrain. From the comparison of sensitivity analysis, Meteodyn WT employing 1-equation turbulence model showed 68% higher RMSE error of wind speed prediction than that of WindSim using the ${\kappa}-{\epsilon}$ turbulence model, while a linear-theoretical model WAsP showed 21% higher error. Consequently, the CFD model WindSim would predict wind field over complex terrain more reliable and less sensitive to climatology input data than other micrositing models. The auto-validation method proposed in this paper and the evaluation result of the micrositing softwares would be anticipated a good reference of wind resource assessments in complex terrain.

• 한국실내디자인학회논문집
• /
• 제40호
• /
• pp.139-148
• /
• 2003

For lighting design in such diverse structures, we need lots of considerations, such as use and characteristics of the structure, harmony with its surroundings, and the function and type of lighting to be installed. The structural characteristics is determined by its shape and several vertical and horizontal factors based on the shape, which can be focused on at day time by shading, the surface structure, the quality of the surface and the color. On the other hand, they can be at night hidden in the darkness or enforced strongly by the effect of the lighting. In this paper, correlation between the ways of lighting and building facade types according to vocabularies for sensitivity is explored based upon an analysis of building facades for small-scale commerce which plays an important role in cityscape lighting design. It is considered that categorization of types of building facades, presented in this article, and the classification system of exterior lighting methods can be useful in planning lighting. And the process of the study is thought to be able to present a method about the exterior lighting planning. Furthermore, computer simulation on the bases of the correlation model of the lighting methods related to vocabularies for sensitivity about the building facade types is expected to be data and means which can be a great help for designers to predict various results quickly.