• 전기의세계
• /
• 제23권2호
• /
• pp.39-45
• /
• 1974

An analysis is developed for the torque characteristics of single-phase induction motors having variable shaded-pole angles. The machanism have two sets of stator windings which one set of stator fed from single-phase sources and other shorted by inserted external impedances. Thus, by phisically rotating one set of stator windings with respect to the other, the only shaded-kpole effect torque performance of a single- phase induction machine and its performance prediction to be expected of the optimum shaded-pole angle can be achieved.

• 한국광학회지
• /
• 제10권6호
• /
• pp.443-447
• /
• 1999

본 연구에서는 shaded spodizer가 광학 디스크 시스템의 재생신호에 미치는 영향을 조사하기 위하여 동의 중앙에서 가장자리로 갈수록 진폭이 단조 감소하는 shaded spodizer와 진폭이 단조 증가하는 shaded spodizer를 스칼라 회절 이론을 사용하여 고려하였다. 또한 bump 형태 변화에 따른 재생 신호의 변화를 조사하기 위하여, 원통형, 준원추형, 그리고 원추형 bump를 고려하였으며, 이때 bump의 높이는 $\lambda/4$로서, 위상 높이가 $\pi$가 되도록 하였다. 동의 중앙에서 가장 자리로 갈수록 진폭이 단조 감소하는 shaded spodizer의 경우에는 bump 반경이 증가함에 따라 재생 신호가 증가하여 극대값을 가진 후 감소하는 경향이 나타났으며, 진폭이 단조 증가하는 shaded spodizer의 경우에는 bump 반경이 작은 영역과 큰 영역에서 극대값을 갖는 특성을 나타냈다. 도한 구면수차를 0.5λ 포함하는 광학 디스크 시스템의 경우 진폭이 단조 감소하는 shaded spodizer의 최대 재생 신호가 spodizer를 사용하지 않은 경우의 최대 재생 신호보다 크게 나타났다.

• 한국환경복원기술학회지
• /
• 제21권6호
• /
• pp.1-13
• /
• 2018

Mapping radiation heat flux of urban area is essential for urban design and landscape planning. Because controlling urban geometry and generating green space are important urban design strategies for reducing urban heat, urban planner and designer need to recognize the micro urban heat distribution for adequate urban planning. This study suggests a new methodology for mapping urban radiation heat flux in a micro scale considering buildings and trees' shade. For doing that, firstly, we calculate net radiation for each urban surfaces (building, road (not shaded, building shaded, tree shaded), ground (not shaded, building shaded, tree shaded), tree (not shaded, building shaded)). Then, by multiplying the area ratio of surfaces to the net radiation, we can obtain the radiation heat flux in micro-scale. The estimated net radiation results were found to be robust with a $R^2$ of 90%, which indicates a strong explanatory power of the model. The radiation heat flux map for 12h $17^{th}$ August explains that areas under the building and tree have lower net radiation heat flux, indicating that shading is a good strategy for reducing incident radiation. This method can be used for developing thermal friendly urban plan.

• 한국태양에너지학회 논문집
• /
• 제32권spc3호
• /
• pp.220-227
• /
• 2012

The maximum power point tracking(MPPT) is important part pf PV generating system, because of nonlinear characteristic of PV array. Many MPPT algorithms have been developed and proposed, but partially shaded in PV generating system, these algorithms can not track maximum power point. This paper explains the partially shaded conditions in the PV generating system and describes a novel new MPPT algorithm. To verify the proposed novel algorithm, PSIM simulation tool is used in this paper, and proper 3kW PV module modeling is made. As a result, the right maximum power point(11PP) of PV PCS can be tracked directly under shading effect for any mismatched condition in solar array.

• 전기의세계
• /
• 제24권1호
• /
• pp.55-62
• /
• 1975

A single-phase induction motor with it's stator winding splitted into two series windings, of which the terminals of one winding is switched pulsationally by a thyristor type ON-OFF device so that the motor may operate as a pulsational shaded-pole motor, can modulate current waveforms of it's two series windings. In view of current waveform modulation method, a single-phase single-winding motor operates as a two-phase induction motor with asymmetrical axis windings where the starting torque can be obtained effectively without an auxiliary capacitor attached and it's running speed controlled by shifting phase between current waveforms differently. Equivalent circuit for analysis is modified from a double revolving field equivalent circuit of a single-phase induction motor with asymmetrical windings whose angle is 45.deg.C elet. degrees. Analysis and test results show that ON-OFF action of the pulsational shaded-pole winding has the same effect of a series capacitor, and then at heavy loads this motor operates with a small amonut of the input current than that having the fixed shaded-pole winding.

• The Journal of Advanced Prosthodontics
• /
• 제5권4호
• /
• pp.448-451
• /
• 2013

PURPOSE. Translucency of all-ceramic restorations is an important factor which affects the final appearance and esthetic outcome of the restoration. The aim of this study was to evaluate the effect of the shade of coloring liquid on the translucency of zirconia framework. MATERIALS AND METHODS. Thirty zirconium oxide core plate ($15{\times}12{\times}0.5$ mm) were divided into 6 groups of 5 plates each. Each group was classified according to the shade of coloring liquid based on Vita Classic Scale (A2, A3, B1, C2, and D2), and each sample was immersed in coloring liquid for 3 seconds as recommended by the manufacturer, except for the control group. Contrast ratio, as a translucency parameter, was calculated using a spectrophotometer and the data were analyzed with oneway analysis of variance (ANOVA) and Tukey's honestly significant differences (HSD) tests (${\alpha}$=.05). RESULTS. Significant differences in translucency among the control and test groups, and the B1 shaded group and other shades was observed. There were no significant differences among A2, A3, C2, and D2 shaded groups. CONCLUSION. The translucency of the zirconium oxide cores was affected by the coloring procedure and significant differences in the translucency measurements were identified between specific shades.

• The Journal of Advanced Prosthodontics
• /
• 제15권3호
• /
• pp.114-125
• /
• 2023

PURPOSE. The aim of the study was to evaluate the optical properties of new generation (3Y-TZP) monolithic zirconia (MZ) with different abutment types and resin cement shades. MATERIALS AND METHODS. A1/LT MZ specimens were prepared (10 × 12 × 1 mm, N = 30) and divided into 3 groups according to cement shades as transparent (Tr), yellow (Y) and opaque (O). Abutment specimens were obtained from 4 different materials including zirconia (Group Z), hybrid (Group H), titanium (Group T) and anodized yellow titanium (Group AT). MZ and abutment specimens were then cemented. L^*, a^*, and b^* parameters were obtained from MZ, MZ + abutment, and MZ + abutment + cement. ∆E₀₀₁^* (between MZ and MZ + abutment), ∆E₀₀₂^* (between MZ and MZ + abutment + cement) and ∆E₀₀₃^* (between MZ + abutment and MZ + abutment + cement) values were calculated. Statistical analyses included 2-way ANOVA, Bonferroni, and Paired Sample t-Tests (P < .05). RESULTS. Abutment types and resin cements had significant effect on L^*, a^*, b^*, ∆E₀₀₁^*, ∆E₀₀₂^*, and ∆E₀₀₃^* values (P < .001). Without cementation, whereas zirconia abutment resulted in the least discoloration (∆E₀₀₁^* = 0.68), titanium abutment caused the most discoloration (∆E₀₀₁^* = 4.99). The least ∆E₀₀₂^* = 0.68 value was seen using zirconia abutment after cementation with yellow shaded cement. Opaque shaded cement caused the most color change (∆E₀₀₃^* = 5.24). Cement application increased the L^* values in all groups. CONCLUSION. The least color change with/without cement was observed in crown configurations created with zirconia abutments. Zirconia and hybrid abutments produced significantly lower ∆E₀₀₂^* and ∆E₀₀₃^* values in combination with yellow shaded cement. The usage of opaque shaded cement in titanium/anodized titanium groups may enable the clinically unacceptable ∆E₀₀^* value to reach the acceptable level.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2006년도 추계 종합학술대회 논문집
• /
• pp.533-535
• /
• 2006

본 논문은 얼굴 인식에서 널리 사용되고 있는 PCA 기법에서 1, 2, 3차의 저차원의 특징 벡터를 배제하여 조명있는 얼굴의 인식률 변화를 실험하였다. 보편적으로 저차원 3개를 배제할 경우 조명에 강건한 얼굴 인식을 보인다고 하나, 저차원의 어느 부분이 조명에 크게 관여가되는지는 알려지지 않고 있다. 이에 본 연구에서는 1차, 2차, 3차 및 이를 조합하여 저차원의 조명에 대한 영향을 분석하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.17-22
• /
• 2011

There are some degradation factors for amorphous silicon solar cells. Light inducing is one of the factor that explained by Staebler-Wronski effect. Also, hotspot heating could be the reason that makes amorphous silicon solar cell degrade. Hotspot heating is occurred when a solar cell is shaded so this work is investigated into two types of shading condition and how these affect to solar cell differently. Reduced irradiance for whole cell and partially shaded as 0($W/m^2$) while the other part of cell is soaking as 1000($W/m^2$) of irradiance are two conditions that are experimented. The two types of shading show different characteristics of degradations. The result shows that partially shaded cell dropped maximum powerless and slower. Also sudden drop points have shown that should be concerned to decide the number of cells for a string. Otherwise, the current through a shaded cell might flow more than cell's capability. It makes cell and module damaged. This work would help to manufacture modules.

• 한국태양에너지학회 논문집
• /
• 제26권4호
• /
• pp.109-118
• /
• 2006

The tree is regarded as an sustainable architectural outdoor design element which reduce urban heat island effect by its solar shading and evapotranspiration. This study carried out field observations of measuring thermal environment of selected tree and its ambience to determine passive cooling effects. Results from the field observations are as below; Tree-shading effect to the thermal environment can not be properly evaluated by merely measuring air temperature differences between tree-shaded space and unshaded space for the maximum temperature difference is less than $1.5^{\circ}C$. The differences of longwave radiation and shortwave radiation between tree-shaded space and unshaded space are measured. Shortwave radiation is considered as a main thermal comfort determining factor for the difference of the shortwave radiation is much bigger than that of longwave radiation. By thermal infrared image analysis, the surface temperature of the tree under strong solar radiation is measured same as ambient air temperature. By which the evapotranspiration is considered to retard tree surface temperature raising effectively.