• 한국약용작물학회지
• /
• 제15권3호
• /
• pp.152-156
• /
• 2007

차광처리가 더덕의 생육 및 광합성에 미치는 영향을 구명하기 위하여 본 실험을 수행하였던 바, 그 결과는 다음과 같다. 1. 차광처리에 의하여 만장과 엽면적은 증가하였으나, 덩굴 및 잎의 건물증은 감소하였다. 2. 차광처리에 의하여 엽록소함량 및 비엽면적은 증가하였으나, 엽위별 일정한 경향이 없었고 상위엽보다는 하위엽에서그 증가 정도가 컸다. 3. 광합성속도와 기공전도도는 광 강도가 강할수록 또 차광일수가 경과할수록 증가하는 경향이었으며 그 증가 정도는 대체로 하위엽에서 크게 나타났다.

• 전자공학회논문지B
• /
• 제29B권7호
• /
• pp.52-61
• /
• 1992

본 논문은 단시안에 투영된 3차원 물체의 Image에서 측정된 명암강도의 차이를 이용하여 3차원 물체의 절대거리 z 및 형상을 유출하는 수치적인 방법을 연구, 단시안에 의해서도 Camera와 물체사이의 3차원 절대거리가 구해질 수 있음을 보여주고 있다. 기발표된 이론과는 다르게 본 논문에서는 점광원을 이용하여 투영된 명암강도와 3차원 물체의 절대거리 및 형상과의 관계를 물체가 Uniform Lambertian이라는 가정하에서 새로운 관계식으로 정립하였다. 정립된 Non-Linear 관계식은 Smoothness 조건아래 $'Calculus of Variation$'방법을 사용하여 수학적 Algorithm으로 정리되어 Programming 되었고 간단한 실험방법을 이용하여 실제 Data에 적용시켜 그 타당성을 조사하였다.당성을 조사하였다.

• 대한치과기공학회지
• /
• 제41권3호
• /
• pp.167-175
• /
• 2019

Purpose: This study was investigated the effect of multi-layer zirconia block type and design location on the mechanical properties of zirconia copings. Methods: Three kinds of multi-layered zirconia blocks (Snow princess multi layered block, Multi cherry, Dental zirconia pre-shaded blank) were used to identify the effects of the kinds of multi-layered zirconia blocks, design locations on mechanical characteristics of zirconia copings. 150 Zirconia copings were fabricated and fracture strength, hardness and microstructure were compared and evaluated. Results: Dental zirconia pre-shaded blank(2,256.9N) had the highest fracture strength of zirconia copings on all the design locations, and it was followed by Snow princess multi layered block(2,107.5N) and Multi cherry(917.0N). Snow princess multi layered block(1,949.7Hv) had the highest hardness of zirconia copings on all the design locations, and it was followed by Dental zirconia pre-shaded blank(1,671.7Hv) and Multi cherry(1,383.7Hv). The cervical layer had the highest fracture strength and hardness of zirconia copings in all the blocks, and it was followed by the cervical+gradation layer, the enamel layer, the enamel+gradation layer, and the gradation layer. Conclusion: It was found that the fracture strength and hardness were different according to the kinds of multilayer zirconia block and design location, and it was confirmed that it is lower than the fracture strength of white zirconia.

• Restorative Dentistry and Endodontics
• /
• 제48권1호
• /
• pp.7.1-7.10
• /
• 2023

Objectives: This study aimed to evaluate the surrounding and underlying shades' effect on the color adjustment potential (CAP) of a single-shade composite used in a thin layer. Materials and Methods: Cylinder specimens (1.0 mm thick) were built with the Vittra APS Unique composite, surrounded (dual specimens) or not (simple specimens) by a control composite (shade A1, A2, or A3). Simple specimens were also built only with the control composites. Each specimen's color was measured against white and black backgrounds or the simple control specimens with a spectrophotometer (CIELAB system). The whiteness index for dentistry (WI_D) and translucency parameters (TP₀₀) were calculated for simple specimens. Differences (ΔE₀₀) in color between the simple/dual specimens and the controls were calculated. The CAP was calculated based on the ratios between data from simple and dual specimens. Results: The Vittra APS Unique composite showed higher WID and TP₀₀ values than the controls. The highest values of ΔE₀₀ were observed among simple specimens. The color measurements of Vittra APS Unique (simple or dual) against the control specimens presented the lowest color differences. Only surrounding the single-shade composite with a shaded composite barely impacted the ΔE₀₀. The highest CAP values were obtained using a shaded composite under simple or dual specimens. Conclusions: The CAP of Vittra APS Unique was strongly affected by the underlying shade, while surrounding this composite with a shaded one barely affected its color adjustment.

• 한국농림기상학회지
• /
• 제23권4호
• /
• pp.283-294
• /
• 2021

경사면일사량은 수평면일사량과 해당위치 지형경사도 간의 기하학적 관계인 일사수광비율을 통해 추정할 수 있다. 그러나 이렇게 추정한 일사량은 주변에 햇빛을 차단하는 장애물이 없다는 것을 가정하기 때문에 만약 실제 농사를 짓고 있는 농장 등에 이를 적용할 경우에 지형으로 인한 차광 등의 영향을 충분히 반영하지 못한다. 음영기복도는 태양의 위치와 지형의 기복으로 인한 직달일사의 변이를 밝기(휘도)로 수치화한 격자 형태의 자료로서, 하나의 격자는 가장 어두운 값 0에서 가장 밝은 값 255까지의 값을 갖는다. 본 연구에서는 지형으로 인한 차광효과를 모의하기 위해 30m 해상도의 DEM을 이용하여 연구지역의 음영기복도를 제작하고 휘도 분석을 수행하였다. 연구지역에 설치된 AWS 22개 지점의 기상자료를 수집하여 일조율 80% 이상인 날을 선별하고, 관측일사량과 각 지점의 휘도를 비교하여 휘도가 지형으로 인한 차광효과를 설명할 수 있는지 확인하였다. 분석결과 휘도와 일사량 간에 상관관계가 있는 것을 확인하였으며, 지형의 영향이 큰 지점에서의 직달일사가 시작되는 시점과 끝나는 시점은 태양고도 보다는 휘도와 잘 부합하는 것으로 나타났다. 추가적인 연구를 통해 주변 지형의 영향을 반영한 휘도를 이용한 상세한 일사량 추정이 가능할 것으로 기대된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.607-608
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.735-736
• /
• 2008

• Journal of Ginseng Research
• /
• 제29권4호
• /
• pp.182-184
• /
• 2005

A new cultural practice for commercial production of American ginseng by organically grown in a shaded greenhouse under controlled environment conditions has been developed. This new procedure will shorten the dormant period and reduce the cultivation period from 4 years in conventionally grown ginseng to 2 years.

• 한국태양에너지학회 논문집
• /
• 제26권4호
• /
• pp.109-118
• /
• 2006

The tree is regarded as an sustainable architectural outdoor design element which reduce urban heat island effect by its solar shading and evapotranspiration. This study carried out field observations of measuring thermal environment of selected tree and its ambience to determine passive cooling effects. Results from the field observations are as below; Tree-shading effect to the thermal environment can not be properly evaluated by merely measuring air temperature differences between tree-shaded space and unshaded space for the maximum temperature difference is less than $1.5^{\circ}C$. The differences of longwave radiation and shortwave radiation between tree-shaded space and unshaded space are measured. Shortwave radiation is considered as a main thermal comfort determining factor for the difference of the shortwave radiation is much bigger than that of longwave radiation. By thermal infrared image analysis, the surface temperature of the tree under strong solar radiation is measured same as ambient air temperature. By which the evapotranspiration is considered to retard tree surface temperature raising effectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.177-180
• /
• 2005

Three dimensional shaded images are standard visualization method for CAD models on the computer screen. Therefore, much of the effort in the visualization of CAD models has been focused on how conveniently and realistically CAD models can be displayed on the screen. However, shaded 3D CAD data images captured from the screen may not be suitable for some application areas. Technical document, either in the paper or electronic form, can more clearly describe the shape and annotate parts of the model by using projected 2D line drawing format viewed from a user defined view direction. This paper describes an efficient method for generating such a 2D line drawing data in the vector format. The algorithm is composed of silhouette line detection, hidden line removal and cleaning processes.