• 산업기술연구
• /
• 제24권B호
• /
• pp.89-94
• /
• 2004

This Study is results of experimental works to investigate the characteristics of vibro-compaction of crushed stones having coarse grain sizes. For testing material, crushed stone, sieved within very narrow ranges of grain size distribution, was used. Cyclic loading apparatus was used to apply cyclic loading to the specimen prepared in the mold. Tests were performed by changing the ratio of the maximum to the minimum stress, frequency and the magnitude of the maximum and the minimum stresses. Settlement of specimen due to cyclic loading was measured to analyze the compaction efficiency and sieve analysis test after cyclic loading test was also carried out to find the crushing rate of the specimen. As results of cyclic loading test, normalized settlement in terms of specimen height tends to be converged around loading cycle number of 1500. The magnitude of normalized settlement is in the range of 3.11 ~ 8.57%. The crushing rate is in the range of 4.46 ~ 8.78%. Normalize settlement and the crushing rate tend to increase with decreasing the ratio of the maximum to the minimum stresses and they tend to increase with increasing the frequency and the magnitude of the maximum and the minimum stresses for the given ratio. In conclusions, compaction rate of crushed stone is controlled by the dynamic stress (difference between the maximum and the minimum stresses) and the crushing rate is dominated by applied energy to the specimen.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.461-468
• /
• 2004

The amount of $CO_2$ and $CH_4$ that were produced during biodegradation with were measured as function of time. Also, the settlements of landfill lysimeters were measured at the same time, and the relation with LFF(landfill gas) production was investigated. The effects of leachate recycle on the acceleration of settlement were studied by comparing two lysimeters. The gas production rate constant, $^{\kappa}_{LFG}$ is obtained to predict future gas production and settlement. These will be key role factors to predict gas production patterns and residual long-term settlement.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.311-312
• /
• 2023

In this study, porous concrete with improved functionality was developed by using superabsorbent polymer (SAP) to provide rooting space for plants. The depth of settlement and mass change according to the substitution and addition rate of SAP were determined by investigating the functional performance of SAP and the volume change upon saturation. Test results indicated the depth of penetration settlement increased as the substitution rate of SAP increased, but the mass change could not be confirmed as the addition rate of SAP increased. The instability of the specimens due to the excessive volume change of SAP, as well as the osmotic pressure phenomenon according to the pH concentration, were identified as the cause. Therefore, future studies are needed to investigate the appropriate substitution and addition rate of SAP, as well as to reduce the osmotic pressure phenomenon according to the pH concentration, which would contribute to the improvement of the functional performance of vegetation concrete.

• 한국패류학회지
• /
• 제28권1호
• /
• pp.21-28
• /
• 2012

채묘시험은 4구간의 수온구 20.0, 23.0, 26.0, $29.0^{\circ}C$에 염분을 20.0, 30.0, 40.0으로 조절하여 온도와 염분의 혼합구에 대한 참굴 부착기 유생의 채묘시험을 실시한 결과, 수온 $29.0^{\circ}C$에서 염분 20.0과 30.0으로 조절된 채묘구에서 평균 $43.1{\pm}0.19%$와 $42.1{\pm}0.1%$로 유의적으로 가장 높은 채묘율을 보였고, 수온 $23.0^{\circ}C$염분 40.0에서 $34.9{\pm}0.6%$ 가장 낮은 부착률을 보였다 (P < 0.05). 부착밀도는 수온 $29.0^{\circ}C$에서 유의적으로 높았고, 염분 40.0의 고염분에서 유의적으로 낮았다(P < 0.05). 그러나 수온과 염분의 혼합효과는 유의적인 차이가 없었다 (P > 0.05). 수온에 따른 염분별 채묘구의 부착 빈도를 조사한 결과 가장 많은 부착빈도는 1.2-2.3 마리/$cm^2$을 보였고, 평균 부착밀도는 1.9-2.4마리/$cm^2$였다. 전체적으로 채묘율과 평균 부착밀도 그리고 부착빈도를 감안하면 본 실험 결과 효과적인 채묘관리를 위한 수온과 염분조건은 수온 $29.0^{\circ}C$, 염분 20.0-30.0으로 조절하는 것이 좋을 것으로 판단된다.

• 한국중재학회지:중재연구
• /
• 제27권4호
• /
• pp.157-177
• /
• 2017

World Trade Organization(WTO) has 164 members since it has established on 1995. It plays a significant role in solving the world trade disputes. The process of the dispute settlement mechanism includes five steps: Negotiation, Establishment of experts group, Deliberation of appellate body, Execution and Supervision of Verdict and the Sanctions for Default. It suggested that the higher rate of developed countries using mechanism to solving the disputes than developing countries solving disputes by mechanism through the analysis of dispute of WTO members. Meanwhile, the more powerful economic entity is, the more trade dispute will be. There are several problems of mechanism by analysis the recently famous cases of trade disputes: Overburden of experts panel, Low utilization rate of the mechanism of developing countries, Lack of economic competition policy and labor standard terms and Unfulfillment of retaliatory measures of developing countries towards developed countries. This paper propose proper solutions and advises to improve mechanism of WTO dispute settlement.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1782-1788
• /
• 2007

This study analyzed ground settlement and ground stress depending on tunnel excavation and the ground reinforcing grouting methods for double line road tunnel through deep weathered zone. Diameter of double line road tunnel was approximately 12m and umbrella arch method and side wall reinforcing grouting were applied. The ring-cut split excavation method and CD-cut excavation method for excavation method were applied. Analysis of failure rate and vertical stress ratio show that the tunnel for which the height of the cover(H) was higher than four times the diameter, it can be considered a deep tunnel. Comparisons of various excavation and ground reinforcement methods were showed that CD-cut method results in lower surface and crown settlement, and lower failure rate than where using Ring-cut split method. In addition the side wall reinforcing grouting resulted in reduction of tunnel displacement and settlement.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2007년 가을학술발표회
• /
• pp.528-541
• /
• 2007

To get the possible for management and maintenance, it was analyzed the deformation characteristics, such as crest of embankment and concrete face slab, and leakage of concrete faced rockfill dams (CFRD). There are trends that embankment deformation depends on intact strength used rockfills rather than dam height, deformation normal to concrete face slab during the first reservoir filling is occurred more than 80% of the total deformation in general, and the magnitude and trend of concrete face slab deformation is similar to post-construction crest settlement. The results showed that the range of post-construction crest settlement suggested by Sherard and Cooke (1987), and Clements (1984) had a good agreement in the cases using rockfill with very high intact strength, but it had a trend which underestimated crest settlement in the cases using rockfill with medium to high intact strength. The maximum leakage rate in general was observed during the first reservoir filling and long-term leakage rate was rapidly increased when the dam height exceeds approximately 120m.

• 한국농공학회지
• /
• 제31권1호
• /
• pp.106-116
• /
• 1989

This study aims at scrutinizing the long4errn consolidation characteristics of peats sampled at three different regions of Chonbuk province. The standard consolidation test and the single load consolidation test were performed about these samples and especially in case of the latter the loading period was 350 days. The main condusions analyzed are as follows. 1. Void ratio showed much greater values than that of the general clay and was decresed greatly according to the increase of the load. 2. In case of the relationship between the sefflement and the long-term settlement time the rate of settlement increment became great according to the increase of the load step and the long4erm settlement became linely proportional to the logarithm of time alter 10 minutes. 3. The linear correlation was showed between the long4erm settlement time and the void ratio and therefore equations by regression analysis were derived in order to estimate the long-term settlement The slope of straight lines increased according th the increase of the load step and secondary consolidation coefficients ranged from 0.04-0.27. 4. The secondary consolidation coeffcient became linealy proportional to the compression index and the ratio of Ca to CC was 0.072. 5. The period required in ending the primary consolidation was about 10 minutes and alter that the secondary consolidation coefficient appeared to have constant value. Therefore the secondary consolidation coefficient was judged to be used as a significant factor in estimating the long4erm settlement. 6. In case of the single load consolidation test the secondary consolidation coefficient showed the tendancy increasing according to the increase of the consolidation pressure.

• 한국지반신소재학회논문집
• /
• 제17권1호
• /
• pp.111-118
• /
• 2018

단층 등 취약지반 조건에서의 터널굴착 시 터널천단 및 측벽변위의 억제를 목적으로 하는 각부보강공이 일반적으로 적용되고 있으며, 터널 단면증가 변화율에 따른 각부보강공 설치각도 및 길이를 고려한 지보안전성 확인을 위한 주요 인자로서 내공변위 천단침하 각부침하 각부축력 등의 여러 응력변위 특성 변수들이 있다. 이러한 굴착중 안전성확인을 위한 변수들에 대한 검토 결과, 우각부 침하영향성이 단면증가율 보다 더 큰 변위경향을 보이는 가장 중요한 중점관리 지배요소로 분석되었으며, 터널단면 증가 변화율에 대한 각 보강공 길이별 축력의 변화관점에서는 큰 연관성을 보여주지 못하는 터널단면 증가율 대비 작은 증가율을 나타냈다. 또한, 각부 보강공 축력의 발생경향은 터널 단면증가율보다 보강공 마찰지지 개념 메커니즘에 따른 거동 영향성을 보여주는 것으로 분석되었다. 본 연구결과, 일정한 길이의 각부 보강공이 선정될 경우 지반불량 구간에서의 터널 단면이 다소 대단면화하여도 무리하게 각부보강공의 길이를 연장시키지 않는 것이 시공성 및 경제성을 고려한 보다 더 합리적인 방법으로 판단된다.

• 한국지반공학회논문집
• /
• 제19권6호
• /
• pp.107-114
• /
• 2003

국내에서는 조립토를 이용한 연약지반 처리공법 중 모래다짐말뚝공법이 많이 활용되고 있으나, 모래자원의 고갈과 단가상승으로 인해 적용이 제한되고 있어 대체공법이 필요한 실정이다. 본 연구에서는 육상부 현장에 시험시공된 쇄석다짐말뚝에 대한 정재하시험을 수행하였으며, 쇄석다짐말뚝과 연약지반의 응력분담비를 규명하고 성능을 평가하였다. 임의 압력에서 치환율이 증가할수록 침하량이 작아지는 경향을 보였다. 치환율 20%일 때의 항복압력은 치환율 30%, 40%일 때 보다 작았다. 치환율 30%와 40%일 때의 항복응력과 침하량은 비슷하였다. 응력분담비는 1.7∼-3.0의 범위에 있었으며, 치환율이 증가할수록 응력분담비가 증가하는 경향을 보이고 있었다.