• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.707-710
• /
• 2005

This experimental study investigate temperature dependency affecting setting and strength development of concrete using mineral admixtures such as CKD, FA and BS. For the properties of setting at $5^{\circ}C$, setting time of concrete with mineral admixture was delayed about $3\~14$ hour compared with that of plain concrete. Use of CKD had a desirable effect on reducing setting retard under $5^{\circ}C$ because of $CaCO_3$ of CKD while use of FA and BS retarded setting time greatly. For compressive strength under $5^{\circ}C$, concrete with CKD had the most compressive strength in early age compared with the other mineral admixtures but exhibited slight strength loss in $-5^{\circ}C$ at 28days. Especially, concrete with FA and BS was observed in early stage at low curing temperature because of strength loss remarkably in $-5^{\circ}C$.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.37-41
• /
• 2008

According to the recent rapidly increasing that construction works are gradually Manhattanized mainly the grand scaled residential buildings, the foundation of the building that is related to safety is increasing for building as a grand scaled mat concrete. Because mat concrete can not be simultaneously placing of concrete in a great quantity due to the circumstance at the field, the inequal deformation of the tensile stress that according to the time lag of hydration heat between the upper layer and the lower layer is affecting as a cause that is the possibility of crack occurrence by increasing. Accordingly, this research checked the efficiency of super retard concrete in applying real structures, and we implemented the preparatory experiment to settle up the inequal deformation of the tensile stress substantially that is according to the time lag of placement between the upper layer and the lower layer by controlling the setting time using the super retarding agent. As the result of test, the more target of delay time lengthened, the more fluidity increased and air content indicated a little differences. There was from 2 to 10 hours between the standard curing and the outside curing at the setting time and in case of calculating the rate of mixing at real structure is required that mix promotion, increasing the amount of mixing, by setting up the curing temperature. The super retard concrete showed the result that in compressive strength, early-age strength was smaller than normal concrete whereas it was same or more figures from at the aging 28days because of the super retarding agent.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.245-250
• /
• 2001

Ultrasonic pulse velocity(UPV) is a useful tool for examining the property of early-age mortar or concrete. Thus, UPV has been used for a long time to characterize setting and hardening of cementitious materials. In this study, in order to investigate the characteristics of setting for mortar, UPV was measured using automatic monitoring system up to 3 days after casting. Test results show that UPV of high water to binder ratio(w/b) mortar remained constant at the beginning of hydration and then abruptly began to increase. However, UPV of low w/b mortar gradually increase due to setting retard caused by use of superplasticizer. Furthermore, the development of UPV for mortar with fly ash is slower than that of mortar without fly ash. It was concluded that the property change of mortar or concrete, such as setting and hardening can be assessed by monitoring of UPV.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.85-88
• /
• 2005

This study investigates influence on concrete adding beverage or detergent, by work man's mistakes during concrete placement in field. Overall, concrete adding beverage or detergent does not affect slump and air content, compared with control concrete. However concrete adding detergent resulted in significantly higher air content, due to inter facial activation ingredient. For the properties of setting time, concrete adding lactic acid beverage indicated the longest retarding properties, next was coffee and soft drink in order. Compressive strength of concrete, which retarded setting time. exhibited slightly improved value at 7 and 28 days respectively, while that of concrete adding detergent significantly decreased, due to higher air content.

• Restorative Dentistry and Endodontics
• /
• 제10권1호
• /
• pp.71-83
• /
• 1984

The purpose of this study was to evaluate the transmission spectrum of the set calcium hydroxide dental cement (Dycal, L.D. Caulk Co. Milford, Del.) Cement was prepared for A T R spectra at a low powder-to-liquid ratio of 3.0gm/ml in order to retard the reaction and facilitate the manipulation of loading the cement into the cell. Spectra were recorded on an I R Spectrophotometer (MX-1, FT) at an agle of incidence of 55. The A T R cell was a RIIc Model TR5 with a hemisperical KRS-5 (Thallium-Bromide-Iodide). A spectrum was recorded within 3 minutes. Further spectra were recorded after 5,10,30 minutes and 1,5,24, 72 hours. The results were as follows; 1. The setting reaction between acid paste and base past would take place fastly within 10 minutes after mix, and that would be slow until 72 hours after mix. 2. In the set cements, some methyl salicylate and calcium hydroxide remained unreacted until 72 hours after mix. 3. The setting reaction and the reaction rate occuring at the surface and in the bulk cements were similar. 4. The chelates were bound together between calcium hydroxide and methyl salicylate.

• 콘크리트학회논문집
• /
• 제18권6호
• /
• pp.759-767
• /
• 2006

본 연구에서는 등가재령개념에 의한 적산온도방법을 이용하여 플라이애쉬를 사용한 초지연 콘크리트의 응결시간 예측방법을 제시하였다. 플라이애쉬 치환 및 초지연제 혼입률 변화에 따른 양생온도별 응결시간은 초지연제 혼입률이 증가하고, 양생온도가 낮을수록 지연되는 것으로 나타났다. 또한 Arrhenius의 함수에 의한 겉보기 활성화 에너지는 배합별로 약간의 차이는 존재하지만 $24{\sim}35KJ/mol$의 범위로 나타났는데, 이는 일반적인 조건에서의 겉보기 활성화 에너지값의 범위인 $30{\sim}50KJ/mol$ 보다 작은 값으로 나타났다. 플라이애쉬 치환율 및 초지연제 혼입률별 겉보기 활성화 에너지를 등가재령식에 대입한 결과 양생온도별로 거의 유사한 값으로 나타나, 응결시간 예측에 등가재령에 의한 적산온도 방법이 효과적으로 적용될 수 있을 것으로 판단되었다. 아울러 등가재령 및 플라이애쉬 치환율 변화에 따른 초지연제 혼입량 추정에 관한 다중상관 회귀 모델을 제안하여 응결시간 및 초지연제 첨가량을 결정할 수 있도록 하였고 회귀 모델에 의한 해석 예측치와 실측치 간에 매우 양호한 상관성을 갖는 것으로 나타났다. 따라서 본 연구에서 제안된 초지연제 혼입률 및 플라이애쉬 치환율별 응결시간 예측 모델은 실무현장에서 초기재령 콘크리트의 응결 시간 평가에 보다 합리적인 품질관리 방법으로 활용이 가능할 것으로 판단된다.

• Restorative Dentistry and Endodontics
• /
• 제37권4호
• /
• pp.188-193
• /
• 2012

Mineral trioxide aggregate (MTA) was developed in early 1990s and has been successfully used for root perforation repair, root end filling, and one-visit apexification. MTA is composed mainly of tricalcium silicate and dicalcium silicate. When MTA is hydrated, calcium silicate hydrate (CSH) and calcium hydroxide is formed. Formed calcium hydroxide interacts with the phosphate ion in body fluid and form amorphous calcium phosphate (ACP) which finally transforms into calcium deficient hydroxyapatite (CDHA). These mineral precipitate were reported to form the MTA-dentin interfacial layer which enhances the sealing ability of MTA. Clinically, the use of zinc oxide euginol (ZOE) based materials may retard the setting of MTA. Also, the use of acids or contact with excessive blood should be avoided before complete set of MTA, because these conditions could adversely affect the hydration reaction of MTA. Further studies on the chemical nature of MTA hydration reaction are needed.

• 콘크리트학회논문집
• /
• 제17권1호
• /
• pp.105-112
• /
• 2005

트럭믹서 및 배쳐 플랜트 세척으로 발생되는 회수수를 안정화시켜 재이용하는 것은 콘크리트의 품질 불안정을 해소하고 강도 향상의 효과를 기대할 수 있기 때문에 이의 활용방안에 대한 적극적인 검토가 요구된다. 본 연구에서는 우리나라의 레미콘 생산 조건에서 사용 가능한 안정화제의 종류를 도출하고자 이를 사용한 회수수 중의 고형분 성상에 대하여 실험?고찰하였다. 실험결과, 회수수 전용 안정화제인 옥시칼본산계 지연제의 고형분량 감소가 상대적으로 우세하였다. 다만, 잉여 반응량에 의해 시멘트 페이스트의 응결지연이 관찰되었으나 레미콘 적용상 저해되는 수준은 아니었다. 안정화제를 혼입한 회수수를 방치함에 따른 영향에서는 초기의 응결지연 효과가 7${\~}$8일 정도에서 상수도수만을 사용한 수준으로 회복됨을 알 수 있었으며, 2${\~}$3일 정도에 안정화 회수수를 사용하는 것이 효과적임을 확인할 수 있었다. 한편, 국내산 당류계 초지연제 역시 유사한 효과를 보여 적용성이 높은 것으로 파악되었다. 시판되는 회수수 안정화제는 수입에 의존하고 있으므로 사회비용의 절감을 위해 안정화제의 국산화가 시급하며 가능한 안정화제의 다각적인 사용성 검토가 긴요하다 할 것이다.

• 한국세라믹학회지
• /
• 제44권9호
• /
• pp.471-476
• /
• 2007

The hydration mechanism of the $3CaO{\cdot}Al_2O_3-CaSO_4{\cdot}2H_2O$ system in the presence of alkali sulfates has been investigated. The early hydration rate of $3CaO{\cdot}Al_2O_3$ was accelerated by the addition of $Na_2SO_4$ and $K_2SO_4$. This is closely related to the formation of syngenite $(CaSO_4{\cdot}K_2SO_4{\cdot}H_2O)$, and the U-phase added $K_2SO_4$ and $Na_SO_4$ in the $3CaO{\cdot}Al_2O_3-CaSO_4{\cdot}2H_2O$ system, respectively. The formation of the rigid syngenite and U-phase structure led to rapid setting and decreases the sulfate content in the liquid phase of the hydrating cement to the extent that it cannot adequately retard the hydration of $3CaO{\cdot}Al_2O_3$. In case of the alkali sulfate not added to the $3CaO{\cdot}Al_2O_3-CaSO_4{\cdot}2H_2O$ system, the ettringite was transformed to monosulfoaluminate immediately after the consumption of gypsum. However, when the alkali sulfates were added to this system, the ettringite did not transform to monosulfoaluminate immediately even though the gypsum was completely consumed. There was a stagnation period to transform to the monosufoaluminate after the consumption of gypsum because the syngenite and U-phase remained as the sulfate source.