• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.158-158
• /
• 2016

최근 화석연료의 고갈과 환경 보전 및 에너지 절약에 대한 관심이 높아짐에 따라 화석연료의 소비를 최소화하고 실내조건을 쾌적하게 유지하려는 연구가 진행되고 있다. 국내의 경우 전체 에너지 소비의 30%이상을 차지하고 있는 건물부문에서의 에너지 소비를 줄이기 위한 활발한 연구가 진행되고 있으며 이에 따른 에너지절약 소재개발이 활발하게 진행되고 있다. 1975년 이후 여러 차례에 걸친 단열강화 조치를 통해 건물에서의 에너지 소모를 줄이고 있었으나 건물의 외벽에 대한 사항으로 한정되어있었고, 또한 건물의 창 면적이 증가함에 따라 창을 통한 열손실량과 열획득량이 더욱 증가하게 되었다. 이러한 문제를 해결하기 위해 열반사유리에 대한 많은 연구가 진행되고 있다. 열반사유리는 근적외선(열선)영역의 빛을 반사시켜 실내의 열손실량 및 외부에서의 열획득량을 감소시켜 에너지의 소비를 줄일 수 있는 유리을 말한다. 이러한 열반사유리은 fresnel 방정식을 통해 빛의 파장대에 따른 반사율 및 투과도를 예측할 수 있는데, 다층박막구조인 Oxide-Metal-Oxide(OMO)구조는 Oxide의 높은 굴절률과 Metal의 낮은 굴절률을 통해 가시광영역대의 높은 투과도와 근적외선 영역의 높은 반사율을 얻을 수 있다. 또한 Metal층을 삽입함으로서 flexible한 코팅이 가능하고, 높은 carrier density와 mobility로 표면 플라즈몬 공명을 통해 특정 파장대의 반사율을 높일 수 있으므로 많은 연구가 진행되고 있다. $TiO_2$는 고굴절률 및 낮은 광흡수성의 특성을 가지는 산화물반도체로 기존의 $In_2O_3$계 산화물에 비해 값이 싸고 높은 안정성과 광촉매특성을 보이므로 외부에 노출된 환경에 적합한 재료이다. Ag는 저굴절률과 낮은 광흡수성을 가지는 재료로 금속층에 적합하다. 본 연구에서는 fresnel 방정식을 통해 반사도 및 투과도를 예측하고 마그네트론 스퍼터링법으로 다층박막을 열선인 적외선 영역에서의 반사율 및 반사 효율을 평가하였다. Index-matching 시뮬레이션을 통해 $TiO_2/Ag/TiO_2$ 다층박막의 투과도와 반사도를 이론적으로 검토하였다. 시뮬레이션 프로그램은 Macleod프로그램을 이용하였고 재료 각각의 굴절률은 Ellipsometry를 이용하여 측정하였다. 두께 40 nm 와 8 ~ 16 nm를 가지는 $TiO_2$층과 Ag층을 각각 RF/DC 마그네트론 스퍼터링법을 이용하여 Glass기판 위에 증착하였다. 직경 3 in 의 $TiO_2$, Ag 소결체 타깃을 이용하였고 스퍼터링 파워는 각각 200 W, 50 W로 설정하였고, 스퍼터링 가스는 Ar가스의 유량을 20 sccm으로 설정하였다. 작업압력은 모두 1 Pa로 설정하였고 타깃 표면의 불순물 및 이물질 제거를 위해 Pre-sputtering을 10분 진행하였다. 박막의 두께는 reflectometer와 Alphastep을 이용하여 측정하였고 Hall effect measurement를 이용하여 비저항, carrier density, mobility등 전기적 특성을 측정하였다. 또한 UV-VIS spectrometer와 USPM-RU-W NIR Micro-Spectrophotometer를 통해 광학적 특성을 측정하였고 계산 값과 비교분석하였다. 또한 열반사 특성을 평가하기 위해 직접 set-up한 장비를 이용하였다. 단열 박스에 샘플을 장착해 적외선 램프를 조사하였을 때의 열 반사효율을 평가하였고, IR Camera를 이용하여 단열 박스 내부의 온도 변화를 관찰하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.133-140
• /
• 2012

This paper suggests an algorithm that can shorten the complexity $O(n^2)$ of Dijkstra algorithm that is applied to the shortest path searching in real-time GPS Navigation System into an up-to-date O(n). Dijkstra algorithm manipulates the distance of the minimum length path by visiting all the nodes from the starting node. Hence, it has one disadvantage of not being able to provide the information on the shortest path every second, in a city that consists of sophisticated roads, since it has to execute number of node minus 1. The suggested algorithm, firstly, runs by means of organizing the set of out-neighbourhood nodes at each level of the tree, and root node for departure node. It also uses a method of manipulating the distance of the minimum path of all out-neighborhoods and interior of the out-neighborhoods. On applying the suggested algorithm to two sophisticated graphs consisted of bi-direction and uni-direction, we have succeeded to obtain the distance of the minimum length path, just as same as Dijkstra algorithm. In addition, it has an effect of shortening the time taken 4 times from number of node minus1 to number of level minus 1. The satisfaction of the drivers can be increased by providing the information on shortest path of detour, every second, when occurs any rush hour or any traffic congestion due to car accident, by applying this suggested algorithm to the real-time GPS system.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.2
• /
• pp.143-151
• /
• 2015

Many studies have investigated the airborne chlorides that can weaken the overall durability of the concrete structures due to the corrosion of steel materials, but most of the studies have aimed to examine weathering by exposing various construction materials to the actual oceanic environment. However, with the exposure test, it was difficult to find the threshold of precise corrosive amount of airborne chlorides due to diverse deteriorating environmental factors such as ultraviolet ray, acid rain, floating material from industrial pollution as well as airborne chlorides. Therefore, in this study, an airborne chloride simulator was set up, in oder to conduct a corrosion accelerating test for steels coated by five different finishing materials. As results, it was found that the corrosion began to be observed at $0.58{\sim}0.73mg/dm^2$ for no-coated steel, at $7.89{\sim}8.46mg/dm^2$for urethane-coated steel, at $57.95{\sim}69.48mg/dm^2$ for red lead-coated steel, and at $80.73{\sim}89.35mg/dm^2$ for stainless-coated steel, respectively. Hence, these specific data can be considered as the threshold ranges of corrosion for each coating material for steel.

• Korean Journal of Environment and Ecology
• /
• v.9 no.1
• /
• pp.1-14
• /
• 1995

To investigate the damage on the forest plant community by the air pollution around Daesan, Kunsan industrial complex, five sites(Daesan) and three sites(Kunsan) were set up and surveyed(Area : 500$m^2$/site). In the analysis of community structure, the dominant species in the canopy and understory layer were Pinus densiflora, P. thunbergiana. ones in the shrub layer appeared Rhododendron mucronulatum and Quercus spp. in the Daesan industrial complex. Species diversity of the plant community in Daesan industrial complex showed very severe difference between plots. Soil acidity measured 4.67~5.12. It was not found that plant community in Daesan industrial complex appeared serious damage by the air pollutant. In the analysis of community structure the dominant species in the canopy and understory layer were P. densiflora, P. thunbergiana in Kunsan industrial complex. Species diversity of the plant community in Kunsan industrial complex was prove to low as nearer from the pollutant. Soil acidity measured 4.32~4.76 and it was very strong acidity. It was found that plant community as nearer from the pollutant appeared visible damage entirely by the air pollutant in Kunsan industrial complex.

• Management & Information Systems Review
• /
• v.30 no.4
• /
• pp.385-414
• /
• 2011

Fans' role and influence is becoming more extensive in these days' complex and competitive sports market. This research considers fans as internal members of sports team, employee and confirms active and voluntary fan citizenship behavior's effects on team, community, and social exchange among community residents, so that an enterprise can increase accessibility from many-sided perspectives when establishing sports marketing strategy in the future. The concept of fan citizenship behavior is set up considering characteristic of sports industry based on employee's organizational citizenship behavior discussed from the internal marketing and organization theory and preliminary studies about client citizenship behavior mentioned from service industry area. Although the sixteen research hypothesis are not fully supported. The results are summarized as follows. These findings give theoretical and marketing implication to future researcher and marketer. First, fan's positive aspect is confirmed which is different from general consumer by examining fan citizenship behavior's effect on teal value in the sports industry. Second, it was confirmed that the team needs marketing strategies about not only relationship between each individual fan, but also interaction between fans in the future. Third, it was confirmed that direct fan's behavior as well as individual fan's cognitive area have effects on team's and social value.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.48-64
• /
• 1999

For quantitative evaluation of geotechnical engineering properties such as rippability and diggability, clear interpretation on the subsurface velocity structures should be preceded by figuring out top soil, weathered and soft rock layers, shape of basement, fracture zones, geologic boundary and etc. from the seismic refraction data. It is very important to set up suitable field parameters, which are the configuration of profile and its length, spacings of geophones and sources and topographic conditions, for increasing field data quality Geophone spacing of 3 to 5m is recommended in the land slope area for house land development and 5 to 10m in the tunnel site. In refraction tomography technique, the number of source points should be more than a half of available channel number of instrument, which can make topographic effect ignorable. Compared with core logging data, it is shown that the velocity range of the soil is less than 700m/s, weathered rock 700${\~}$1,200m/s, soft rock 1,200${\~}$1,800m/s. And the upper limit of P-wave velocity for rippability is estimated 1,200 to 1,800m/s in land slope area of gneiss. In case of tunnel site, it is recommended in tunnel design and construction to consider that tunnel is in contact with soft rock layer where three lineaments intersecting each other are recognized from the results of the other survey.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.1
• /
• pp.1-6
• /
• 2006

Through the application of a microwave-assisted extraction, the aim of study was to investigate the extraction conditions for the total yield, electron donating ability, total polyphenol contents and nitrite scavenging effect from Pleurotus eryngii. This experiment was conducted under the following extraction conditions: the microwave power (60, 90, 120 W), sample to solvent ratio (1:50, 1:20, 1:10), extraction time (1, 5, 10, 15 mins), and extractant like water, $50\%$ EtOH and $99\%$ EtOH. During the increase of microwave power ranging from 60 to 120 W, the maximized effective components were obtained when the microwave power was set at 60 W. By decreasing the ratio down to 1:10 (g/mL), the extraction of effective components but not total yield was the highest at 1:10 (g/mL). As going up to 15 min, the maximum extraction of effective components was achieved at 1 min for the extraction time and was little affected at over 5 min. In conclusion, the most appropriate conditions for the extraction of effective compounds from Pleurotus eryngii were as follows: the microwave power at 60 W, 1:10 of the sample to solvent ratio, extraction time at 1 min and water as the extractant.

• Journal of the Economic Geographical Society of Korea
• /
• v.10 no.2
• /
• pp.223-238
• /
• 2007

Central government of Korea devised the balanced national development as one of important agenda of government administration, and set up special act for balanced national development. According to special act, a plan to transfer public institutions to local areas was publicized on June 24, 2005. Thus 175 public institutions located in the capital area will be transfered to 11 local governments, and innovative cities will be built in local areas until 2012. However, Gwangju and Jeonnam province adopted not two individual innovative cities but one common innovative city in cooperation with two local governments. This study focuses on the characteristics of location selection process of common innovative city in Gwangju and Jeonnam province. Discussion about construction of common innovative city was started in need of new model for common development of two provinces, and most of peoples agreed a plan to establish on common innovative city within Jeonnam area near Gwangju area. Gwangju Jeonnam Regional Innovation Council, in particular, played an important role in the process of location selection and initial discussion about common innovative city. In addition, Common innovative city to be built in Naju city will be provided positive regional development effects in several dimensions. In result, it has been evaluated as a successful model of innovative city to be constructed with transfer of public institutions to local areas.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.4
• /
• pp.1034-1038
• /
• 2007

To examine the difference of health-related quality of life (QoL) of obese patients between before and after treatment of Korean traditional medicine. This study was assessed in 18 obese-women (age 29.72${\pm}$7.38) treated by acupuncture and herbal medicine using SF-36 quality of life questionnaire between January and July 2006, a 36 item instrument yielding 8 dimensions (Social functioning, Role limitation-Physical, Role limitation-Emotion, Mental health, Vitality, Bodily pain, and General health) and a total score. Their weight was measured by Inbody 3.0 (Biospace co. Korea). QoL and body composition was assessed twice at baseline (B) and 4 weeks after treatment. Auricular acupuncture and electrical needle stimulation to abdomen, thigh, and arm fat was used twice a week and complex herb formula was prescribed according to their constitution and symptoms for 4 weeks. Herb medication was taken 2 times a day. Respective variables were analyzed with Wilcoxon signed ranks test and the level set for statistical significance was p <0.05. The mean of the body weight (P=0.000;B64,68${\pm}$6.86, 4 WKs 60.47${\pm}$5.69), fat percentage (P=0.000;B33.14${\pm}$4.86, 4 WKs 30.16${\pm}$5.34), body mass index (P=0.000;B25.18${\pm}$2.44, 4 WKs 23.46${\pm}$2.09) and fat weight (P=0.000;B21.66${\pm}$5.06, 4 WKs 18.41${\pm}$4.57) of some obese patients decreased significantly between before and after treatment for 4 weeks. Physical functioning (P=0.48;B27.06${\pm}$3.17, 4 WKs 28.00${\pm}$1.71), Mental health (P=0.01 ;B18.83${\pm}$5.25, 4 WKs 22.00${\pm}$3.73), Vitality (P=0.028;B13.89${\pm}$3.03, 4 WKs 15.44${\pm}$2.53), Bodily pain (P=.0014;B8.84${\pm}$1.75, 4 WKs 10.15${\pm}$1.78), and the total scores (P=0.001;B104.99${\pm}$12.60, 4 WKs 114.58${\pm}$11.11) of SF-36 were increased significantly after treatments. These data show some differences in QoL and BMI between before and after treatment on obesity and suggest that the treatment with acupuncture and herbal medicine have a positive impact on several domains of QoL of some obese patients. Further randomized clinical trials (RCTs) including follow-up are needed to examine whether acupuncture and herb medicine have a positive effect on QoL of treatment group compared with control group.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.3
• /
• pp.110-118
• /
• 2003

Spacer dampers maintain the constant gaps between each conductor in a bundle conductor-transmission line, and are installed at proper intervals to keep a line from all sorts of damages derived from the vibration energy caused by mechanical or electrical external factors. It is most important to embody a technology which considers difficulties of maintenance and repair, and has optimum elements in order to prevent accidents such as destruction by fire or the snapping of a wire by the effect of vibration phenomenon coming from transmission lint In the resent thesis, therefore, the analysis of vibratory characteristics of spacer damper is set up by analytical methods such as the analysis of conductor motion's governing equation, the equation of spacer damper's motion, spacer damper-fastened wire's motion in a span and the numerical analysis of finite difference method. Furthermore, the installation distance between spacer dampers was scrutinized by simulations of various vibration phenomena which change at any time as actual conditions do, and hereafter difference method. Furthermore, the installation distance between spacer dampers was scrutinized by simulations of various vibration phenomena which change at any time as actual conditions do, and hereafter we will be able to analyze all kinds of vibration phenomena coming from a boltless spacer damper with 6 bundle conductor for 765kV transmission line based on new analytical methods.