• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.974-978
• /
• 1998

The kinetics of crystal growth and nucleation in dependence on the supersaturation of an aqueous solution of 3-nitro-1,2,4-triazol-5-one(NTO) were evaluated on the draft tube-baffle(DTB) crystallizer operated batchwise. The crystal growth rate is proportional to the supersaturation to the 2.9 power, and the nucleation rate to the 4.2 power. The uncleation behavior for NTO-water system in DTB crystallizer was grasped according to Mersmann's criteria. The nucleation in this crystallizer was found to act with heterogeneous nucleation and surface uncleation simultaneously. Simplified relation was derived for calculation of mean crystal size of product crystals from the batch cooling crystallizer. The obtained relation was verified by a set of experiments.

• The Journal of the Korea Contents Association
• /
• v.12 no.3
• /
• pp.311-321
• /
• 2012

This study derived from 5 variables(information, product diversity, communication possibility, responsiveness, price) of service quality on social commerce from literature studies and set up the research model and hypotheses. The 167 questionnaires are used in this analysis. The results were as follows: first, all the variables had positive influences upon satisfaction except responsiveness. Second, all the variables had positive influences upon repurchase intention except price. Third, the satisfaction of social commerce had a positive influence upon repurchase intention. This study suggested the strategic implications to induce customers satisfaction and repurchase intention after analyzing critical factors about service quality of social commerce.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.3
• /
• pp.389-397
• /
• 2002

Bacteriocin-producing lactic acid bacteria were isolated from kimchi. One isolate producing the most efficient bacteriocin was identified and named Lactococcus lactis B2, based on the biochemical properties and 16S rDNA sequences. The B2 bacteriocin inhibited many different Gram positive bacteria including Lactococcus, Lactobacillus, Leuconostoc, Enterococcus, Streptococcus, and Staphylococcus, but did not inhibit Gram-negative bacteria. The bacteriocin was maximally produced at temperatures between $25^{\circ}C\;and\;30^{\circ}C$ and at the initial pH of 7.0. Ninety $\%$ of the activity remained after 10 min of heat treatment at $121^{\circ}C,\;and\;100\%$, after 1 h exposure to organic solvents. The bacteriocin was purified from culture supernatant by ammonium sulfate precipitation, CM Sepharose column chromatography, ultrafiltration, and finally, by reverse-phase HPLC. A 1.58-kb fragment was amplified from B2 chromosome by using a primer set designed from the published nisA sequence. Sequencing result showed that the fragment contained the whole nisZ and 5' portion of nisB, whose gene product was involved in postmodification of nisin. The upstream sequence, however, was completely different from those of reported nisin genes.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.3
• /
• pp.563-569
• /
• 2004

The DNA sequence of the chitosanase gene (choK) from $\beta$-Proteobacterium KNU3 showed an 1,158-bp open reading frame that encodes a protein of 386 amino acids with a novel 74 signal peptide. The degenerated primers based on the partial deduced amino acid sequences from MALDI- TOF MS analyses yielded the 820 bp of the PCR product. Based on this information, double inverse PCR cloning experiments, which use the two specific sets of PCR primers rather than single set primers, identified the unknown 1.2 kb of the choK gene. Subsequently, a 1.8 kb of full choK gene was cloned from another PCR cloning experiment and it was then subcloned into pGEM T-easy and pUC18 vectors. The recombinant E. coli clone harboring recombinant pUC18 vector produced a clear halo around the colony in the glycol chitosan plates. The recombinant ChoK protein was secreted into medium in a mature form while the intracellular ChoK was produced without signal peptide cleavage. The activity staining of PAGE showed that the recombinant ChoK protein was identical to the chitosanase of wild-type. The comparison of deduced amino acid sequences of choK revealed that there is 92% identity with that of Sphingobacterium multivorum chitosanase. Judging from the conserved module in other bacterial chitosanases, chitosanase of KNU3 strain (ChoK) belongs to the family 80 of glycoside hydrolases.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.10
• /
• pp.1522-1528
• /
• 2008

The objective of this study was to develop a model for simulating gastric digestion in the pig. The model was constructed to include the chemical and physical changes associated with gastric digestion such as enzyme release, digestion product removal and gastric emptying. Digesta was collected from the stomach cannula of pigs to establish system parameters and to document the ability of the model to simulate gastric digestion. The results showed that the average pH of gastric digesta increased significantly from 2.47 to 4.97 after feed consumption and then decreased 140 min postprandial. The model described the decrease in pH within the pigs' stomach as $pH_t=5.182e^{-0.0014t}$, where t represents the postprandial time in minutes. The cumulative distribution function of liquid digesta was $V_t=64.509e^{0.0109t}$. The average pepsin activity in the liquid digesta was 317Anson units/mL. There was significant gastric emptying 220 min after feed consumption. The cybernetic dynamic system of gastric digestion was set according to the above data in order to compare with in vivo changes. The time course of crude protein digestion predicted by the model was highly correlated with observed in vivo digestion (r = 0.97; p = 0.0001), Model prediction for protein digestion was higher than that observed for a traditional static in vitro method (r = 0.89; p = 0.0001).

• Journal of Pharmaceutical Investigation
• /
• v.36 no.3
• /
• pp.161-167
• /
• 2006

The objective of this study was to investigate the dissolution patterns of variety of orally administered drug products available on the market. It aimed to understand their dissolution behaviors on the basis of the biopharmaceutics classification system (BCS) concept. On the tenets of BCS, several active pharmaceutical ingredients were selected: fluoxetine hydrochloride (class I), naproxen sodium (class ll), pyridostigmine bromide (class III), furosemide (class IV) and simvastatin (class IV). Typical dissolution media used in this study were pH 1.2, pH 4 & 6.8 phosphate buffers, and water. In cases, particular dissolution media specified in the KP and/or USP were used. Dissolution patterns of fluoxetine hydrochloride and pyridostigmine bromide products were characterized by their rapid release In addition, their dissolution characteristics were relatively unaffected by the type of a dissolution medium. Similar dissolution patterns were observed with pH 1.2, pH 4 & 6.8 phosphate buffers and water. By sharp contrast, poor dissolution patterns were noticed with naproxen sodium products, when pH 1.2 and pH 4 phosphate buffer were used. Improvements in its dissolution were achieved by switching the dissolution media to pH 6.8 phosphate buffer or water. Unsatisfactory dissolution data also were observed with a simvastatin product, when it was subject to dissolution tests by use of a surfactant-free pH 1.2, pH 4 & 6.8 phosphate buffers and water. All the release patterns reported in this study were best understood when BCS concepts were implemented. Our results demonstrated that a BCS-based drug classification should be considered first to choose a dissolution test/method and set up dissolution specification.

• Knowledge Management Research
• /
• v.19 no.2
• /
• pp.151-162
• /
• 2018

Response surface methodology (RSM) is one of popular tools to support a systematic improvement of quality of design in the product and process development stages. It consists of statistical modeling and optimization tools. RSM can be viewed as a knowledge management tool in that it systemizes knowledge about a manufacturing process through a big data analysis on products and processes. The conventional RSM aims to optimize the mean of a response, whereas dual-response surface optimization (DRSO), a special case of RSM, considers not only the mean of a response but also its variability or standard deviation for optimization. Recently, a posterior preference articulation approach receives attention in the DRSO literature. The posterior approach first seeks all (or most) of the nondominated solutions with no articulation of a decision maker (DM)'s preference. The DM then selects the best one from the set of nondominated solutions a posteriori. This method has a strength that the DM can understand the trade-off between the mean and standard deviation well by looking around the nondominated solutions. A posterior method has been proposed for DRSO. It employs an interval selection strategy for the selection step. This strategy has a limitation increasing inefficiency and complexity due to too many iterations when handling a great number (e.g., thousands ~ tens of thousands) of nondominated solutions. In this paper, a TOPSIS-based method is proposed to support a simple and efficient selection of the most preferred solution. The proposed method is illustrated through a typical DRSO problem and compared with the existing posterior method.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.23
• /
• pp.10057-10059
• /
• 2015

Positron emission tomography (PET) as the functional component of current hybrid imaging (like PET/CT or PET/MRI) seems to dominate the horizon of medical imaging in coming decades. $^{18}$Flourodeoxyglucose ($^{18}FDG$) is the most commonly used probe in oncology and also in cardiology and neurology around the globe. However, the major capital cost and exorbitant running expenditure of low to medium energy cyclotrons (about 20 MeV) and radiochemistry units are the seminal reasons of low number of cyclotrons but mushroom growth pattern of PET scanners. This fact and longer half-life of $^{18}F$ (110 minutes) have paved the path of a centralized model in which $^{18}FDG$ is produced by commercial PET radiopharmacies and the finished product (multi-dose vial with tungsten shielding) is dispensed to customers having only PET scanners. This indeed reduced the cost but has limitations of dependence upon timely arrival of daily shipments as delay caused by any reason results in cancellation or rescheduling of the PET procedures. In recent years, industry and academia have taken a step forward by producing low energy, table top cyclotrons with compact and automated radiochemistry units (Lab-on-Chip). This decentralized strategy enables the users to produce on-demand doses of PET probe themselves at reasonably low cost using an automated and user-friendly technology. This technological development would indeed provide a real impetus to the availability of complete set up of PET based molecular imaging at an affordable cost to the developing countries.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.81-87
• /
• 2017

In this paper, we present the system that user can search and manage data using united interface and user can define search field dynamically. The feature of this system is that it is possible to manage multiple polymorphic meta information first. Second, there is a database integration bus that can support easy integration between the various systems. Third, it is possible to set the search item for each user which can customize polymorphism data for each user. The system studied in this paper is expected to be capable of managing big data, which is currently well received in the field of ICT. In addition, it will be possible to effectively manage multi-species polymorphic data in various fields in the future and to easily integrate between systems having various environments.

• Journal of Intelligence and Information Systems
• /
• v.9 no.2
• /
• pp.121-133
• /
• 2003

Due to the rapid growth of Internet, means of communication with customers in a traditional customer support environment such as telephone calls are being replaced by mainly e-mail in a Web-based customer support system. Although such a Web-based support is efficient and promises potential benefits for firms, including reduced transaction costs, reduced time, and high quality of support, there are some difficulties associated with responding to many types of customer's inbound e-mails appropriately. As many types of e-mail are received, considerable attention is being paid to methods for increasing the efficiency of managing and responding e-mails. This research proposes an intelligent system for managing customer's inbound e-mails in organizations by applying case based reasoning technique for responding to various customers' inbound e-mails more effectively. In this approach, a case is represented as a frame-typed data structure corresponding to an inbound e-mail, keywords, and its reply e-mail. In the retrieval procedure, keywords and affinity set is developed to index a case, and then the case is represented as a vector, a case vector. Also, cosines value is calculated to measure the similarity between a new inbound e-mail and the cases in the case base. In the adaptation procedure, we provide several adaptation strategies to adapt and modify the retrieved case. The strategies guide to make an outbound e-mail using product databases, databases for customer support, etc. Additionally, the Web-based system architecture is proposed to implement our methodology. The proposed methodology and system will be helpful for developing more efficient Web-based customer support.