• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.198-201
• /
• 2003

The multi-action forging process is one of developing directions of forging technologies. In this study, the multi-action die is designed and developed by the screws mechanism and the forging simulation is conducted by using plasticine to investigate the optimum conditions for the design of the screws. The results show the design variables are optimum when the diameter is 30 mm and the screw angle is $60^{\circ}$ for the upper screw rod and the outer diameter is 60 mm and the screw angle is $23.4^{\circ}$ for the lower screw tube. It makes the relative velocity between the upper punch and the die to be two to one, which is the expected condition. The material flow of the plasticine forgings is uniform. Therefore, it is feasible to use the screw set as the multi-action mechanism for controlling the movement of the multi-action forging die set.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.333-338
• /
• 2000

This paper presents an experimental study and numerical thermal deformation analysis in the home appliance, Video Cassette Recorder. Analyzing the change axial force of a set screw according to the change of temperature in the drum assembly, we can determine the initial torque in tightening set screw. The torque will have the preload boss not be separated from the bearing. Also we conduct the fundamental experiment to constitute a boundary condition of the numerical analysis. With the result of this study, we can change the material of preload boss, copper, for aluminum.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.809-813
• /
• 2000

In this study, screw machining system by use of a rotational tool such as an end-mill or a face cutter with Y axis off-set on a CNC turing center was developed for quick machining. In this system, It was possible to use different tools for different processes, and by off-setting the tool in Y direction by calculated amount it was possible to avoid tool interference problem which could occur within the central area at the end of a tool. In addition, machining a screw with a helix of up to 3 different leads combined and with tapered minor diameter was possible.

• 한국지반공학회논문집
• /
• 제30권1호
• /
• pp.5-16
• /
• 2014

본 논문에서는 현장인발재하시험을 통한 스크류 앵커 파일의 인발 저항 특성에 관한 연구내용을 제시하였다. 현장시험에서는 동일한 피치를 가지나 샤프트나 스크류 직경이 다른 스크류 앵커 파일에 대해 다양한 시공조건을 도출하고 이에 대한 시험을 수행하였다. 실험결과 스크류 앵커 파일은 스크류가 없는 파일에 비해 현저히 큰 인발저항력을 발휘하는 것으로 검토되었으며 시간경과 효과와 그라우팅 여부에 따른 검토 결과 일반 파일과 유사하게 시간경과에 따라 인발저항력이 증가하는 셋업효과와 그라우팅시 인발저항력 상승효과를 기대할 수 있는 것으로 분석되었다. 이와 아울러 기존의 헬리컬 파일의 인발저항력 산정식을 스크류 앵커 파일의 인발저항력 평가에 있어서의 적용성을 검토하였으며 현장인발재하 시험결과를 다양한 측면에서의 상관관계를 파악할 수 있도록 제시하고 연구결과의 실무적 관점에서의 검토 내용을 기술하였다.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.7-13
• /
• 2007

This study proposes a new screw measurement system that is capable of measuring the pitch or lead of a screw, which is one of the most important parameters representing the screw quality. There are various conventional methods for screw measurement including some mechanical and optical ones, but they can not be applied to measure the lead except the profiles or sizes. The newly suggested method is able to measure the pitch or lead directly. This is executed by scanning the thread with a digital probe while the target screw rotates. The devised measurement system is a integrated computer system which is composed of a stepping motor, a digital linear gauge and a chuck device for holding the measured screw. In order to operate the system effectively and conveniently, a computer program having graphical user interface facility is developed. Some experiments were done to prove the effectiveness of the system.

• 한국표면공학회지
• /
• 제52권3호
• /
• pp.163-170
• /
• 2019

Durability of instrument is one of the most important factor to ensure accurate treatment and decrease failure for the orthopedic surgical operation. Normally, a set-screw driver tip has been processed with hard coating for their higher durability and wear resistance. And several surface modification methods were obtained such as titanium nitride (TiN) coating, diamond like carbon coating, other nitriding, and etc. In this study, we have surface modified on set-screw driver tip with TiN and DLC, investigated whether the TiN and DLC coatings affect the mechanical properties and durability of the set-screw driver tip in the pedicle screw system. The surface morphologies were observed with scanning-electron microscopy (SEM), and the static/dynamic torsional properties were investigated with universal testing machine based on ASTM F543. Coating thickness of each coatings were commonly around $1^{\circ}C$. Static torsional stiffness, and ultimate torque values for DLC and TiN coated samples were significantly higher than those of non-coated sample by the pared T-test. Surface morphology of after the dynamic torsional test was more clean with less scratch or friction traces from DLC coating than that of TiN coating and non-coated sample.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권5호
• /
• pp.109-115
• /
• 2008

구조물이 초고층화, 대형화 되어감에 따라 철근의 이음방법에 대한 필요성이 증대되고 있다. 현재 일반적으로 건설현장에서는 겹이음을 많이 사용하고 있으나 굵은 직경을 사용한 구조부재의 경우 겹이음 사용 시 피복두께 확보의 어려움으로 부착파괴 및 접합부의 복잡한 배근으로 인한 콘크리트 타설의 시공성 저하 등이 문제가 되고 있다. 또한 압접이음은 철근의 단부를 국부적으로 가열하여 접합하는 방식으로 압접 후 철근의 취약부분이 발생할 수 있으므로 시공현장에서의 철저한 품질관리가 요구되는 단점이 있다. 이러한 단점을 해결하고자 새로운 개념의 Up-set Coupler를 적용하였다. 본 연구에서는 기계적 이음방법 중 철근 선조립공법이나 고강도, 대직경의 철근을 사용하는 PSC구조물의 접합부에서 주로 사용되는 대표적인 이음방법인 Screw Coupler와 Up-set Coupler, 그리고 이음이 없는 철근을 사용하여 각각의 인장특성과 사용성을 실험적으로 연구하고자 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.292-295
• /
• 2001

Conventional robots actuated by motors with the speed reducer such as harmonic drive had weakness in delivering loads, pressing, grinding, and cutting jobs. To overcome this, a new type of robot actuated by the ball screw was proposed. The ball screw is actuated by using four bar mechanism. The dynamics model of the robot was set up. The robot has parameter uncertainties and nonlinearlity due to the ball screw actuator. To coordinate the robot, the sliding-mode control was applied.

• 한국지열·수열에너지학회논문집
• /
• 제11권3호
• /
• pp.13-19
• /
• 2015

This study was aimed at the heating tank with a screw-rotation device for improving the thermal efficiency of electric boiler. In the proposed system, analysis items were the heater rod surface temperature variation, reaching time for set temperature and thermal efficiency. The following conclusions are obtained from this experimental study. (1) When screw speed increases, the time reaching for set temperature tended to be shorter. (2) When the rotation speed becomes 300 rpm, the surface temperature difference between the right and left heater rod decreases by 49%, from $19.7^{\circ}C$ to $9.7^{\circ}C$ in average. (3) When the rotation speed is over 250 rpm, proposed heating tank structure appeared to be effective in terms of thermal efficiency. Thermal efficiency with the rotation speed 300 rpm is improved by 3.8% compared to the case of rotation speed 0 rpm.

• Computers and Concrete
• /
• 제29권 6호
• /
• pp.361-374
• /
• 2022

On the premise of ensuring that the automatic and quantitative discharging function of concrete conveyors is met, the accuracy of the weight forecast by the mathematical model of the screw conveying volume is improved, and the error of the weight of the concrete parts and the accumulation thickness is reduced. In this paper, the discrete element method (DEM) is used to simulate the macroscopic flow of concrete. Using the concrete discrete element model, the size of the screw conveyor is set, and establish the response model between the influencing factors (process and structure) and the concrete mass flow rate according to the design points of the screw discharging experiment. The nonlinear data fitting method is used to obtain the volumetric efficiency function under the influence of process and structural factors, and the traditional screw conveying volume model is improved. The mass flow rate of concrete predicted by the improved mathematical model of screw conveying volume is consistent with the test results. The model can accurately describe the conveying process of concrete and achieve the purpose of improving the accuracy of forecasting the weight of discharged concrete.